Commit Graph

135 Commits

Author SHA1 Message Date
Tom Pittenger 178bbb080b Plane: improve crosstrack error while navigating to loiter point
There is no crosstrack concept in the loiter navigation so when going from waypoint to loiter you will not converge onto the line between those two points. This commit adds crosstracking by performing normal waypoint navigation until you get near it.
2015-11-09 08:25:26 +11:00
Lucas De Marchi 0151853c21 ArduPlane: remove check for MAVLINK_COMM_NUM_BUFFERS 2015-11-04 12:14:15 +11:00
Lucas De Marchi d1be74c87e ArduPlane: remove checks for HAL_BOARD_APM2 and HAL_BOARD_APM1 2015-11-04 12:14:13 +11:00
Lucas De Marchi 1b07dabeb7 Replace prog_char and prog_char_t with char
prog_char and prog_char_t are now the same as char on supported
platforms. So, just change all places that use them and prefer char
instead.

AVR-specific places were not changed.
2015-10-30 14:35:30 +09:00
Lucas De Marchi 20c6ffc5e3 Replace use of UARTDriver::printf_P() with UARTDriver::printf()
This also starts to show warnings on places that were already using
wrong printf format strings.
2015-10-30 14:35:25 +09:00
Lucas De Marchi 6f4904189b Replace use of println_P() with println() 2015-10-30 14:35:22 +09:00
Lucas De Marchi a964ac38ec Replace use of print_P() with print() 2015-10-30 14:35:21 +09:00
Lucas De Marchi 831d8acca5 Remove use of PROGMEM
Now variables don't have to be declared with PROGMEM anymore, so remove
them. This was automated with:

    git grep -l -z PROGMEM | xargs -0 sed -i 's/ PROGMEM / /g'
    git grep -l -z PROGMEM | xargs -0 sed -i 's/PROGMEM//g'

The 2 commands were done so we don't leave behind spurious spaces.

AVR-specific places were not changed.
2015-10-30 14:35:16 +09:00
Lucas De Marchi 84da1f5039 Rename gcs_send_text_P to gcs_send_text 2015-10-30 14:35:07 +09:00
Lucas De Marchi 2c38e31c93 Remove use of PSTR
The PSTR is already define as a NOP for all supported platforms. It's
only needed for AVR so here we remove all the uses throughout the
codebase.

This was automated with a simple python script so it also converts
places which spans to multiple lines, removing the matching parentheses.

AVR-specific places were not changed.
2015-10-30 14:35:04 +09:00
Andrew Tridgell 458e967d06 Plane: added RPM logging
useful for seeing if a petrol motor is still running
2015-09-24 20:58:18 +10:00
Randy Mackay 6da53ae3b2 Plane: replace SKIP_GYRO_CAL with INS_GYR_CAL
Also calibrate gyros with accel cal and set trim
2015-09-21 17:06:43 +09:00
Andrew Tridgell 9e7c38b933 Plane: moved logging of mode to Log_Write_Vehicle_Startup_Messages
this fixes a problem where the initial mode isn't logged on arming
2015-09-17 20:15:26 +10:00
Peter Barker c2d61391ef Plane: DFMessageWriter; ability to trickle messages out to DF 2015-09-03 15:20:20 +10:00
Tom Pittenger 81f8358705 Plane: restart landing by jumping to DO_LAND_START or decrement mission
only takes effect on mode change
2015-08-29 21:17:35 +10:00
squilter 583c087eca Plane: update severities 2015-08-28 10:04:35 +10:00
Andrew Tridgell 019f2af930 Plane: fixed build with HIL disabled 2015-08-23 22:21:51 +10:00
ziltoid2 b9dd6b7aac Plane: prevent delayed compass HIL data from disabling compass at system startup only 2015-08-23 16:48:48 +10:00
Tom Pittenger 204ff7b158 Plane: move statics into new struct
removed default case statements
2015-08-23 10:34:18 +10:00
Tom Pittenger da8f4f9e95 Plane: reworked is_flying
add crash detection, allow disengage via param CRASH_DETECT
improved is_flying behavior
take off, landing and hard-landing improvements
add stillness check to is_flying and log it
minimum airspeed is determined ARSPD_FBW_MIN*0.75
2015-08-23 10:34:18 +10:00
Andrew Tridgell f2c1010501 Plane: prevent mode switch changes changing WP tracking
this fixes a bug where a mode switch change during an AUTO mission
which does not change the flight mode would cause cross tracking to be
reset, so the plane will not correctly follow the desired track

Many thanks to Michael Du Breuil for the log that showed this bug
2015-08-12 14:42:49 +10:00
squilter c24ba83fb1 Plane: init vehicle capabilities 2015-08-05 16:08:49 +09:00
Andrew Tridgell 6c07795b63 Plane: added HIL_SUPPORT define
disable HIL support on APM2 to save flash space
2015-07-30 11:04:31 +10:00
Andrew Tridgell 266857c595 Plane: avoid linking optflow on APM2
not used, just taking memory
2015-07-10 16:46:30 +10:00
Andre Kjellstrup edc32092ce Plane: Do not run long_failsafe during final or landing. 2015-07-02 14:28:45 +10:00
Andre Kjellstrup 9d525d4382 Plane: Do not run FailSafe if on final approach or landing.
A failsafe (Circle, RTL) would easily become a disaster if trigged
during approach or final.
2015-07-02 14:28:45 +10:00
Andrew Tridgell 4aac2c5c96 Plane: trigger OVERRIDE_CHAN in px4io
setup the MODESWITCH channel as our OVERRIDE_CHAN, allowing for
instant manual passthru in px4io when OVERRIDE_CHAN goes above 1750

This makes for faster switching, and avoids bugs where a still enabled
FMU channel disables override
2015-06-21 18:19:16 +10:00
Andre Kjellstrup 19aa7caad0 GCS_Failsafe: option to trigger only in AUTO mode. 2015-06-18 07:52:43 +10:00
Andrew Tridgell bc6a52f8db Plane: fixed handling of OVERRIDE_CHAN on arming
When arming we need to ensure that we don't enable any channels
otherwise PX4IO will think that FMU is active and will stop running
the internal RC mixer
2015-06-09 12:48:55 +10:00
Andrew Tridgell 47f4a5db10 Plane: try to load px4 mixer 10 times on boot
this allows for possible temporary failures
2015-06-02 21:59:03 +10:00
Randy Mackay 9ece826c28 Plane: Log_Write_Startup writes parameters 2015-06-01 20:22:50 +09:00
Grant Morphett 2c3cff7f84 Plane: Moving parameter logging to be after all systems have started 2015-06-01 20:22:40 +09:00
Andrew Tridgell 441d96c946 Plane: fixed APM1 build 2015-05-21 07:48:53 +10:00
Andrew Tridgell b92c2409e4 Plane: added local millis() and micros() to reduce code size a bit 2015-05-21 07:48:53 +10:00
Andrew Tridgell 18c37935c9 Plane: convert from .pde to .cpp files 2015-05-21 07:48:52 +10:00