Randy Mackay
4032ac9884
AC_AutoTune: level criteria is 5deg for plane and 2.5 for all others
2021-02-06 14:45:53 +09:00
Andrew Tridgell
2e9b2fbc2b
Plane: update release notes for 4.0.9beta1
2021-02-06 15:46:01 +11:00
Michael du Breuil
623951a262
AP_HAL_ChibiOS: Add some extra GPS SBF config
2021-02-05 11:52:29 -07:00
Michael du Breuil
5f3b1b92a4
AP_GPS: SBF don't send configuration until we've recieved a prompt
...
This fixes a configuration problem with SBF unit's where sometimes we
fail to detect the GPS unit continously, until it's been manually
configured. This was tested by doing a hard reset to the GPS unit.
This also now accepts a set of defines from the hwdef, or build
environment, which allows us to specify extra config options.
2021-02-05 11:52:29 -07:00
Michael du Breuil
d9ffd04a96
AP_GPS: Broadcast the detect message on AP_Periph over CAN
2021-02-05 11:52:29 -07:00
Andrew Tridgell
b113fe15ab
Tools: added MatekH743-periph to autobuild
2021-02-05 20:13:36 +11:00
basti
a3c47e0a23
AP_OSD: add SD-card handling to font README
2021-02-05 19:48:06 +11:00
Randy Mackay
f20fc28a85
Tools: param files to ease SITL setup of GPS-for-yaw
2021-02-05 17:22:27 +09:00
Peter Barker
3da156e358
AP_InertialSensor: prevent nullptr dereference in SITL
2021-02-05 15:02:12 +11:00
Andrew Tridgell
6144136b61
Filter: fixed reset of filters to first value
...
the delay elements were set incorrectly
2021-02-05 15:01:22 +11:00
Tom Pittenger
d1e6b0befb
AP_HAL_ChibiOS: Add ADC1 support to STM32F3
...
This is useful for AP_Periph battery monitoring
2021-02-04 16:30:38 -08:00
murata
09f04e8a5a
AP_RangeFinder: Devices are enabled and disabled by type
...
AP_RangeFinder: Devices are enabled and disabled by type
AP_RangeFinder: Delete some description of I2C function address.
2021-02-05 09:44:27 +11:00
Andrew Tridgell
b8e82a56f3
HAL_ChibiOS: don't start rout ticks till after full system init
...
this prevents an occasional boot hang on systems with DShot
enabled. We shouldn't be starting DShot output till after setup() is
complete as the outputs are still being configured
2021-02-05 07:17:57 +11:00
Randy Mackay
a09bdcdda1
Tools: default param file to ease using copter SITL with vicon
2021-02-04 20:21:00 +09:00
Peter Barker
f847758272
Filter: add gtest suite
2021-02-04 20:50:48 +11:00
Peter Barker
514dfa4b71
SITL: SF45B: increase resolution to 1 degree
...
The mode filter tends to squish a lot of data if we don't get this
correct.
2021-02-04 20:50:21 +11:00
Tatsuya Yamaguchi
83417c1df7
AP_Notify: modify NTF_BUZZ_VOLUME description
2021-02-04 17:27:00 +09:00
Peter Barker
ee2f615352
AP_Proximity: RPLidarA2: correct face distances are assigned to
2021-02-04 16:57:48 +11:00
Peter Barker
567e9733b6
autotest: augment bisect-helper.py to help with flapping tests
...
- option to allow for a string which must be present in the outout
- option for strings which must not be present in the output
- repeat option so test must pass many times
- elaborate diagnostic output
- option to run under Valgrind (to provoke races)
The output from each test run is poked into a directory in /tmp
The number of runs a test took to fail is poked into a different file in /tmp, helping to tune the --autotest-test-passes parameter
2021-02-04 16:22:28 +11:00
Peter Barker
c2e310d75f
autotest: add test for OBSTACLE_DISTANCE_3D message
2021-02-04 15:50:45 +11:00
Peter Barker
393ec5d6f7
autotest: add test for MAVProxy proximity sensor
2021-02-04 12:03:35 +11:00
WillyZehnder
acfe815305
AP_Scripting: make get_control_mode_reason available to lua
2021-02-04 08:32:35 +09:00
Peter Barker
84953c2e39
AP_BattMonitor: fix constexpr-and-MIN don't get along bug
...
lib/libArduCopter_libs.a(AP_BattMonitor_SMBus_NeoDesign.cpp.0.o): In function `AP_BattMonitor_SMBus_NeoDesign::timer()':
/home/pbarker/rc/ardupilot/build/sitl/../../libraries/AP_BattMonitor/AP_BattMonitor_SMBus_NeoDesign.cpp:27: undefined reference to `AP_BattMonitor_SMBus_NeoDesign::max_cell_count'
collect2: error: ld returned 1 exit status
2021-02-04 09:17:57 +11:00
Patrick José Pereira
ba293084e3
SITL: Remove pointer check before delete
...
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2021-02-04 09:01:19 +11:00
Patrick José Pereira
61bcbfea14
AP_TempCalibration: Remove pointer check before delete
...
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2021-02-04 09:01:19 +11:00
Patrick José Pereira
12cd138030
AP_HAL: Remove pointer check before delete
...
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2021-02-04 09:01:19 +11:00
Patrick José Pereira
6bdc1704f4
AP_GPS: Remove pointer check before delete
...
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2021-02-04 09:01:19 +11:00
Patrick José Pereira
e9a299d96e
AP_CANManager: Remove pointer check before delete
...
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2021-02-04 09:01:19 +11:00
danlaks
d244f22522
Tools: AP_Bootloader: Add AP_HW_SWBOOMBOARD_PERIPH identifier
...
SpektreWorks Boom Board AP_Periph device
2021-02-04 08:37:32 +11:00
Andy Piper
baf8c9d70c
ChibiOS: update to latest ChibiOS to include osalDbgAssert redefine
2021-02-03 23:35:44 +11:00
Andrew Tridgell
c580151d75
ChibiOS: fixed SRAM3 size for cache disable
2021-02-03 23:35:44 +11:00
Andy Piper
2cdc202d19
AP_HAL_ChibiOS: use non-cachable SRAM3 for DMA on H743
...
Adjust SRAM1+SRAM2 to 256k as describe in the H743 reference manual
Provide access to mem_info() information
Co-authored-by: Andrew Tridgell <andrew@tridgell.net>
2021-02-03 23:35:44 +11:00
Andy Piper
cfac268f13
AP_Filesystem: add @SYS/memory.txt
...
Co-authored-by: Andrew Tridgell <andrew@tridgell.net>
2021-02-03 23:35:44 +11:00
Andy Piper
0eff201016
AP_HAL: add mem_info()
...
Co-authored-by: Andrew Tridgell <andrew@tridgell.net>
2021-02-03 23:35:44 +11:00
murata
de9382b0f4
AP_Mission: Reflecting the result of the process
2021-02-03 22:15:02 +11:00
Peter Barker
af29f34f2c
Plane: store previous_mode_reason only as a local
...
It's never used outside the mode-changing method.
2021-02-03 20:33:25 +11:00
murata
698f967b63
GCS_MAVLink: Notify the maximum number of missions
...
Update libraries/GCS_MAVLink/MissionItemProtocol.cpp
Co-authored-by: WickedShell <Wicked.Shell.Scripts@gmail.com>
GCS_MAVLink: Notify the maximum number of missions
2021-02-03 20:31:50 +11:00
Peter Barker
82edfc6237
Sub: remove unused prev_control_mode_reason
2021-02-03 19:22:25 +11:00
Michael du Breuil
f854477efe
AP_BattMonitor: Limit the scope of possible corruption if the NeoDesigns gets a bad cell count
2021-02-03 19:21:39 +11:00
Andrew Tridgell
699e61da57
Tools: auto-build new matek boards
2021-02-03 19:05:12 +11:00
Andrew Tridgell
4a178d5c44
Tools: added new Matek bootloaders
2021-02-03 19:05:12 +11:00
Marko
00d0fe876d
AP_Compass: Added support for internal i2c bus to VRBrain-v51
...
Now the internal compass HMC5883 of the VRBrain-v51 is correctly recognized
Co-authored-by: Pierre Kancir <pierre.kancir.emn@gmail.com>
2021-02-03 19:00:48 +11:00
Iampete1
e600df680e
Plane: instantly switch from RTL to QRTL if within radius
2021-02-03 18:53:54 +11:00
Andy Piper
553425f994
Scripts: add bi-directional dshot firmware to built binaries
2021-02-03 18:49:06 +11:00
Andy Piper
49f0ba058c
Bootloaders: add bi-directional dshot bootloaders
2021-02-03 18:49:06 +11:00
Andy Piper
06a1500f98
AP_HAL_ChibiOS: ensure GPIO pins get undef'ed properly
...
minimise bi-directional dshot configs for:
CubeOrange
Durandal
MatekF405
MatekH743
OmnibusNanoV6
Pixracer
mRoPixracerPro
omnibusf4pro
CUAV-X7
2021-02-03 18:49:06 +11:00
Patrick José Pereira
07c3435f9d
SITL: Add missing const in member functions
...
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2021-02-03 18:45:14 +11:00
Patrick José Pereira
7b6f1225ba
AP_WheelEncoder: Add missing const in member functions
...
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2021-02-03 18:45:14 +11:00
Patrick José Pereira
b8360a08c7
AP_Vehicle: Add missing const in member functions
...
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2021-02-03 18:45:14 +11:00
Patrick José Pereira
9904b397d8
AP_UAVCAN: Add missing const in member functions
...
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2021-02-03 18:45:14 +11:00