Commit Graph

248 Commits

Author SHA1 Message Date
Randy Mackay
f5640dadbf Copter: guided mode velocity controller 2014-07-06 17:01:08 +09:00
Randy Mackay
fdc0ec837b Copter: add nav_guided suport to Auto mode 2014-07-06 17:00:31 +09:00
Andrew Tridgell
21b0b3bc15 Copter: log up to 3 mags 2014-07-04 12:07:59 +10:00
Randy Mackay
8c488ebd87 Copter: use common Log_Write_Camera
pair programmed with Craig Elder
2014-06-17 14:11:39 +10:00
Randy Mackay
810c87969c Copter: Ch7/8 switch to enable/disable feed forward and accel limiting 2014-06-10 20:03:04 +09:00
Andrew Chapman
3f0a52cb53 Copter: ch7/8 switch for auto pause/continue
- added new mode for CH7/CH8 (#24, auto mission reset)
- changed mission.start() to mission.start_or_resume() in auto_init()
2014-05-08 23:09:42 +09:00
Randy Mackay
b5ed23f592 Copter: integrate skeleton Hybrid mode 2014-04-23 14:59:17 +09:00
Randy Mackay
7af5d4a8ce Copter: remove RALLY_WP_SIZE definition 2014-04-19 15:00:30 +09:00
Andrew Chapman
fa3732ac6d Copter: integrate AP_Rally 2014-04-19 15:00:23 +09:00
Randy Mackay
e6d2692eab Copter: Loiter_Turns moves to edge of circle if location provided 2014-04-16 16:28:08 +09:00
Emile Castelnuovo
9e31f032c2 Copter: added VRBRAIN board #includes and #defines 2014-04-08 16:19:20 +10:00
Randy Mackay
47c1cb8b99 Copter: log parachute events 2014-04-07 13:36:59 +09:00
Randy Mackay
340f3a7f9d Copter: ch7/ch8 parachute release 2014-04-07 13:36:47 +09:00
Andrew Tridgell
640b64f5e4 Copter: convert to new GPS API 2014-04-01 06:38:24 +11:00
Randy Mackay
0822adfb34 Copter: integrate spline navigation 2014-03-28 09:22:59 +09:00
Andrew Tridgell
11e5b95878 Copter: updates for GPS changes 2014-03-24 12:04:46 +11:00
Randy Mackay
f3813593b7 Copter: use Dataflash lib's Log_Write_Cmd 2014-03-19 12:12:11 +09:00
Randy Mackay
b587d0d597 Copter: pass eeprom start to Mission constructor 2014-03-19 12:11:56 +09:00
Randy Mackay
f77b2af661 Copter: use common location options masks 2014-03-19 12:10:26 +09:00
Randy Mackay
37fe229ded Copter: remove unused definitions 2014-03-19 12:10:12 +09:00
Randy Mackay
c56f521897 Copter: ch6 tuning of RC_FEEL_RP 2014-03-04 22:23:53 +09:00
Randy Mackay
fdae812814 Copter: DO_SET_ROI persists across waypoints
Users should add a DO_SET_ROI command with zero lat, lon and alt to
restore the yaw control to the default control (which is normally
look-at-next-wp)
2014-02-18 21:36:02 +09:00
Randy Mackay
00913ffe1b Copter: throttle rate to simple P controller
Saves at least 15bytes of RAM
2014-02-16 13:35:40 +11:00
Randy Mackay
20989fd5e9 Copter: allow ch6 tuning of EKF 2014-02-15 05:48:20 +11:00
Andrew Tridgell
a112694a50 Copter: added AUX switch option for enable/disable EKF 2014-02-15 05:48:17 +11:00
Andrew Tridgell
24f2ac20de Copter: removed HIL_MODE_ATTITUDE
this really can't work any more, as AHRS can't support it
2014-02-15 05:29:46 +11:00
Randy Mackay
aa4c3eaffe Copter: resolve RTL state compiler warnings 2014-02-15 05:27:48 +11:00
Randy Mackay
f46ff2b44e Copter: remove unused defines 2014-02-15 05:27:46 +11:00
Randy Mackay
aec67cd3df Copter: integrate control_autotune 2014-02-15 05:27:44 +11:00
Randy Mackay
d90d3d8dca Copter: integrate control_flip 2014-02-15 05:27:44 +11:00
Randy Mackay
ef666c73ab Copter: remove Position mode 2014-02-15 05:27:42 +11:00
Randy Mackay
1457a9d31a Copter: auto_mode to global scope 2014-02-15 05:27:41 +11:00
Randy Mackay
689e92eb33 Copter: control_rtl 2014-02-15 05:27:39 +11:00
Randy Mackay
65f7bf92f4 Copter: replace yaw_mode with auto_yaw_mode 2014-02-15 05:27:37 +11:00
Randy Mackay
2219f21744 Copter: add RC_FEEL_RP parameter
Values from 0 ~ 100 control amount of filtering on roll and pitch input.
100 = no filter so crisp feel, 0 = a lot of filtering so very sluggish
response
2014-02-12 16:28:41 +09:00
Dneault
f48e106271 Copter: add coax heli support
Motors should be attached to RCOutputs 1 and 2, Flaps should be connected
to RC outputs 3 and 4
2014-02-07 12:36:04 +09:00
Randy Mackay
214a859e97 Copter: remove unused RADX100 definition
The real purpose of this small change is to kick off the autobuilder for
the AC3.1.1 release.
2014-01-26 13:41:14 +09:00
Randy Mackay
a45b9cbe9a Copter: remove unused RELAY_TOGGLE definition 2014-01-26 10:10:02 +09:00
Randy Mackay
dee5fb212a Copter: remove dup definition of FRAME_ORIENTATION
Ideally the frame orientation parameter should be moved to the motors
class
2014-01-21 21:44:17 +09:00
Randy Mackay
ae4f368f16 Copter: allow ch6 tuning of loiter speed 2014-01-15 15:22:52 +09:00
Randy Mackay
a3527ade61 Copter: move EARTH_FRAME definition to defines.h
defines.h is for defining enumerations and other unchanging values while
config.h is for changeable values like parameter defaults, enabling or
disabling sensors.
2014-01-14 21:53:13 +09:00
Randy Mackay
66859686a0 Copter: remove some unused definitions 2014-01-14 21:21:54 +09:00
Randy Mackay
138c2803be Copter: combine NTUN and INAV dataflash msgs 2014-01-13 22:00:11 +09:00
Randy Mackay
df9d1614e2 Copter: remove PID logging
Almost never used and eats up limited log description space
2014-01-13 17:23:39 +09:00
ctech4285
2b5d8aa5b7 Copter: integrate EPM library 2013-12-17 15:36:42 +09:00
Andrew Tridgell
9716e80e21 Copter: moved ap_message into GCS.h 2013-12-17 11:51:35 +11:00
Andrew Tridgell
cc3ee2ec0c Copter: added dual compass logging when available 2013-12-10 13:31:42 +11:00
Randy Mackay
cf0547e854 Copter: remove AN0~AN15 pin definitions 2013-12-06 10:28:28 +09:00
Randy Mackay
e978a710cc Copter: remove PIEZO_PIN definition 2013-11-30 18:21:01 +09:00
Randy Mackay
7ef04bb73b Copter: rename nav_yaw to control_yaw 2013-11-27 22:48:20 +09:00