Andrew Tridgell
3ec381094e
Copter: fix VOLT_DIVIDER docs
2013-06-07 08:40:37 +10:00
Andrew Tridgell
8703d39475
Copter: the INS object is needed for HIL_MODE_SENSORS
...
otherwise we can't level, so can't arm
2013-06-04 18:09:06 +10:00
Randy Mackay
181beb004d
Copter: update AC3.0-rc5 release notes
2013-06-04 15:26:02 +09:00
Randy Mackay
fcf2429e39
Copter: remove throttle controller's ability to limit lean angle
2013-06-04 15:25:59 +09:00
Randy Mackay
dd92a2ba07
Copter: AC3.0-rc5 version and release notes
2013-06-04 15:25:56 +09:00
Andrew Tridgell
ba959fd594
Copter: remove unused define
2013-06-04 10:36:34 +10:00
Randy Mackay
1b08f12d53
Circle: allow counter clockwise rotation
2013-06-03 22:12:56 +09:00
Randy Mackay
40f5226518
Copter: reset yaw angle only when motors not spinning
2013-06-03 22:12:52 +09:00
Andrew Tridgell
340c451caf
Copter: fixed off-by-one in rcmapper
...
oops ...
2013-06-03 22:22:26 +10:00
Andrew Tridgell
595d3c694a
Copter: make it possible to change board orientation at runtime
2013-06-03 16:52:52 +10:00
Andrew Tridgell
725293b9c3
Copter: removed use of rc_ch[] global array
2013-06-03 16:23:48 +10:00
Randy Mackay
213eaa8db6
Copter: integrate draft RCMapper
2013-06-03 16:23:47 +10:00
Randy Mackay
993bccc60e
Copter: point nose at landing point if specified
2013-06-03 15:20:37 +09:00
Randy Mackay
9f59f2724f
Copter: bug fix for take-off when throttle is zero
...
Verify_takeoff was always returning false if throttle was zero. The
pilot should be able to move their throttle back to zero immediately
after initiating the mission
2013-06-03 14:18:56 +09:00
Randy Mackay
13c41e74f2
Copter: reduce pre-arm board voltage check to 4.3V
2013-06-02 20:47:58 +09:00
Randy Mackay
036e6f4f2c
Copter: updated AC3-rc4 release notes
2013-06-02 12:21:06 +09:00
Randy Mackay
9e91def774
Copter: update firmware version and release notes
2013-06-02 12:19:36 +09:00
Olivier-ADLER
735406fa77
Copter : POSITION_HOLD mode -> allow user position control
2013-06-02 11:49:18 +09:00
Olivier-ADLER
68470c9176
Copter : Land submode - Check for GPS 3D Fix instead of checking for available home position
2013-06-02 11:49:12 +09:00
Dr Gareth Owen
18e566ccc5
failsafe gps lost bug fix
2013-06-02 11:41:59 +09:00
Randy Mackay
b462bfed84
Copter: remove unused print_wp function
2013-06-02 11:32:38 +09:00
Dr Gareth Owen
4c6d6ea96e
changed yaw reset to when armed to not use initial_simple_bearing
2013-06-02 11:29:30 +09:00
Dr Gareth Owen
79bd8b4fd0
rtl resets yaw to same as when armed - unless user specifies otherwise
2013-06-02 11:29:27 +09:00
Randy Mackay
0460147a15
Copter: guided mode yaw fix
...
Nose of copter now points at next guided point if it is more than 10m
away
2013-06-02 11:25:35 +09:00
Randy Mackay
5203ba9fe3
Copter: alt hold feed forward filter
2013-06-01 21:13:47 +09:00
Randy Mackay
99f5462a03
Copter: circle mode fixes
2013-06-01 18:21:30 +09:00
Randy Mackay
e3cd494709
Copter: remove debug message
2013-06-01 18:21:30 +09:00
Randy Mackay
23ce35d292
Copter: remove unused NAV_WP_INAV #define
2013-06-01 18:21:28 +09:00
Randy Mackay
5e2fc32410
Copter: remove unused cli wp report
2013-05-31 21:04:27 +09:00
Randy Mackay
1722e438d8
Copter: pass alt hold gain to WP_Nav library
2013-05-31 21:04:10 +09:00
Randy Mackay
d875e95da3
Copter: remove nav and wp tests from cli
...
This are more fully tested in the autotester
2013-05-31 15:23:39 +09:00
Randy Mackay
ae91c4a237
Copter: alphabetise order of cli test menu
2013-05-31 15:16:06 +09:00
Randy Mackay
e2495b7a49
Copter: alphabetise order of cli setup menu
2013-05-31 15:16:06 +09:00
Randy Mackay
a0c8bf238e
Copter: move motors test to test menu
...
Also allow test to be run from mission planner's cli window
2013-05-31 15:16:05 +09:00
Randy Mackay
1807840d4f
Copter: fixed comments re mag field pre-arm check
2013-05-31 12:28:04 +09:00
Randy Mackay
7b50ecc73c
Copter: pre-arm check for mag field length
2013-05-31 12:23:19 +09:00
Randy Mackay
a1821c89e7
Copter: pre-arm check for board voltage < 5.8V
2013-05-31 11:31:27 +09:00
Randy Mackay
c6e383be0f
Copter: disable board voltage pre-arm check for PX4
2013-05-31 11:27:54 +09:00
Andrew Tridgell
2488c4fdc3
Copter: update docs on volt/current pin
2013-05-31 07:57:15 +10:00
Dr Gareth Owen
f175111243
added GPS check before mode change. New mode_requires_gps() function.
2013-05-30 20:33:15 +09:00
Andrew Tridgell
0e31a2f582
Copter: fixed indent-tabs-mode
2013-05-30 09:55:51 +10:00
Andrew Tridgell
30df8796ce
Copter: fixed loading of waypoints
...
copter code assumes that command_total includes the home waypoint
2013-05-29 21:44:08 +10:00
Andrew Tridgell
903d5636bb
Copter: added support for partial mission load
...
this allows individual waypoints to be updated in missions
2013-05-29 16:25:05 +10:00
Randy Mackay
c3d21a457f
Copter: add pre-arm board voltage check
...
Copter will not arm unless board voltage is over 4.5V
2013-05-28 21:50:31 +09:00
Randy Mackay
6ecd2d74a3
Copter: beep twice during arming
2013-05-27 13:55:34 +09:00
Randy Mackay
cdcf442f55
Copter: enable GPS failsafe by default
2013-05-27 11:25:37 +09:00
Randy Mackay
ec7ee47099
Copter: scaling stability patch
2013-05-27 11:21:31 +09:00
Randy Mackay
838fb3f4e2
Copter: don't spin motors in ALTHOLD with zero throttle
2013-05-27 10:42:22 +09:00
Randy Mackay
4fa101292a
Copter: add baro health to pre-arm checks
2013-05-25 12:24:47 +09:00
Randy Mackay
d1791bab76
Copter: fix barometer cli test
2013-05-25 12:21:29 +09:00