Andrew Tridgell
5ce418b4ea
Plane: added FLIGHT_OPTIONS bit for disabling pitch up check in takeoff
...
some takeoff procedures use high pitch angles
2018-10-31 18:53:36 +11:00
Michael du Breuil
f150cae75a
Plane: Allow center throttle to be trim airspeed in cruise
2018-09-11 09:07:00 +10:00
Michael du Breuil
8417bcc7d5
Plane: Add flight options bitmask
2018-08-28 09:40:53 +10:00
Tom Pittenger
6820531e2a
Plane: fixed error string spelling
2018-03-02 21:37:11 -08:00
Michael du Breuil
faea5d285c
Plane: Consolidate some of the PID logging details
2018-03-03 17:34:18 +12:00
Peter Barker
8cae776448
Plane: move logging of PM and PERF messages to AP_Scheduler
2018-02-13 17:15:05 +11:00
Tom Pittenger
512b327cd4
Plane: failsafe events to use enums instead of magical numbers : Non-functional change
2017-12-07 00:19:32 -08:00
Tom Pittenger
8adacfeea3
Plane: always log MODE and include reason when logging is enabled
2017-10-25 21:18:29 +11:00
Peter Barker
01d8c506d2
Plane: add option to entirely disable short failsafe
2017-10-24 09:28:13 +11:00
Peter Barker
212174bc0e
Plane: remove unused defines
2017-08-24 19:48:17 +09:00
Peter Barker
8272fb8fa2
Plane: remove unused repeating events defines
2017-08-22 09:58:12 -07:00
Andrew Tridgell
fedd2c558c
Plane: added AETR log message
...
this makes debugging mixers much easier
2017-08-01 08:25:32 +10:00
Andrew Tridgell
dd4f56dd98
Plane: added PIQ messages for quadplane PIDs
...
keep them separate from fixed wing PIDs, so we can watch the
interaction between the PIDs in transitions
2017-03-14 14:42:20 +11:00
Andrey Kolobov
35d406aeab
Plane: added a soaring controller to Arduplane
2017-03-14 08:53:10 +11:00
Mathieu OTHACEHE
152edf7189
Global: remove mode line from headers
...
Using a global .dir-locals.el file is a better alternative than
reincluding the same emacs header in every file of the project.
2016-10-24 09:42:01 -02:00
Andrew Tridgell
d6890495aa
Plane: added swapped channel version of elevon/vtail/flaperon output
...
this makes it possible to setup an elevon plane without changing the
transmitter reversals
2016-09-14 11:48:05 +10:00
Tom Pittenger
b187e1f9a6
Plane: add reason to set_mode()
2016-08-17 22:38:54 -07:00
Tom Pittenger
ca32bcc58d
Plane: add new flight mode AVOID_ADSB to mimic GUIDED
2016-08-17 22:38:54 -07:00
Randy Mackay
413f82bac1
Plane: remove unused definitions
2016-06-18 11:55:49 +09:00
Andrew Tridgell
574ba71ef3
Plane: update for AP_TECS API change
2016-05-14 08:26:10 +10:00
Andrew Tridgell
dcb24f2bc1
Plane: use DataFlash::log_while_disarmed()
2016-05-09 12:05:25 +10:00
Andrew Tridgell
4666b25258
Plane: initial implementation of QRTL for quadplane RTL
2016-04-30 14:34:47 +10:00
Andrew Tridgell
27fb35253c
Plane: added in-flight transmitter tuning
2016-04-16 20:26:43 +10:00
Andrew Tridgell
4d7beab8cc
Plane: added QTUN logging for quadplane
2016-03-25 12:33:19 +11:00
Lucas De Marchi
e01d49ff53
ArduPlane: replace header guard with pragma once
2016-03-16 18:40:45 +11:00
Andrew Tridgell
f4ccf94dfc
Plane: added QLAND mode
...
for VTOL landing. Use for failsafe as well
2016-03-09 18:20:41 +11:00
Peter Barker
ca4017d093
Plane: defines.h should not use defines from config.h
...
config.h includes defines.h early, so defines in config.h are unavailable
2016-02-19 12:34:23 -02:00
Tom Pittenger
2e92089ce6
Plane: Reverse Thrust
...
Reverse thrust for controlled landings, even with much steeper approach slopes. This is achieved by allowing throttle demand to go negative to maintain a target airspeed. A Pre-Flare stage was added, triggered by an altitude, to allow for a slower airspeed just before land. That lower airspeed can be near stall.
new params LAND_PF_ALT, LAND_PF_SEC, LAND_PF_ARSPD, USE_REV_THRUST
2016-02-09 14:18:02 +11:00
Andrew Tridgell
d82c8dcd6d
ArduPlane: update for changed AP_Camera API
2016-01-29 09:19:44 +11:00
Dario Lindo Andres
9bba55f937
ArduPlane: Added precise camera trigger logging
...
Added update_trigger and check_digital_pin functions
added camera trigger precise time mark
detect camera feedback pin status
added support for simple digital pin
included support for digital pin. Already included in
added support for TRIGGER MSG
2016-01-29 09:19:43 +11:00
Andrew Tridgell
2983576067
Plane: added QLOITER mode
...
quadplane loiter
2016-01-09 07:38:52 +11:00
Andrew Tridgell
ca85c332d6
Plane: separate QSTABILIZE and QHOVER modes
2016-01-09 07:38:52 +11:00
Andrew Tridgell
6468fc6d93
Plane: Initial implementation of quadplane
...
adds "HOVER" mode
2016-01-09 07:38:52 +11:00
Tom Pittenger
da8f4f9e95
Plane: reworked is_flying
...
add crash detection, allow disengage via param CRASH_DETECT
improved is_flying behavior
take off, landing and hard-landing improvements
add stillness check to is_flying and log it
minimum airspeed is determined ARSPD_FBW_MIN*0.75
2015-08-23 10:34:18 +10:00
Andre Kjellstrup
39797529fd
GCS_Failsafe: defines for new failsafe option
2015-06-18 07:52:42 +10:00
Andrew Tridgell
8359b75201
Plane: removed NOINLINE define
2015-05-21 09:35:55 +10:00
Andrew Tridgell
1a7d831327
Plane: support raw IMU logging
2015-05-07 12:11:52 +10:00
Andrew Tridgell
5038e1d26d
Plane: remove deprecated log types
...
we no longer depend on the binary format for Replay, so we can change
IDs now
2015-04-30 11:05:17 +10:00
Tom Pittenger
f5dfe7c650
ArduPlane: Log isFlying status
...
Log is_flying() status and its float probability in new STAT msg
and piggyback on MODE bitmask flag.
2015-04-30 10:57:03 +10:00
Andrew Tridgell
b0cdf8952b
Plane: added HIL_MODE parameter
...
this allows for HIL with any firmware
2015-03-13 22:52:56 +11:00
Randy Mackay
3a1465c9d1
Plane: integrate SerialManager
...
call SerialManager init_console on startup
use SerialManager's set_block_writes_all
2015-01-29 14:05:15 +11:00
Robert Lefebvre
747232b197
Plane: Deprecate some Log Message enumerations which are moving to the DataFlash library.
2015-01-21 14:37:29 +09:00
Andrew Tridgell
5a01933b7b
Plane: use dataflash Log_Write_Airspeed()
2015-01-20 09:10:57 +11:00
priseborough
2500f7e9c2
Plane : Add data logging for optical flow use with EKF
2014-12-06 18:16:48 +11:00
Andrew Tridgell
ce9b14f0c8
Plane: convert to using StorageManager
2014-08-13 18:46:44 +10:00
Andrew Tridgell
fcbdcb520a
Plane: rename enum for Telem2Protocol
2014-07-30 14:49:20 +10:00
Matthias Badaire
57253fc2ee
Rover: Add SERIAL2_PROTOCOL for GCS and FRSky telemtry
...
This allows selection of protocol type on telem2. The default is MAVLink, but can be selected as FrSky protocol
2014-07-29 17:08:20 -07:00
Andrew Tridgell
ae29a24348
Plane: use sensors from board subtypes
2014-07-14 09:44:35 +10:00
Andrew Tridgell
f6bba74fb6
Plane: enable MPU9250 for Linux build
2014-07-14 09:44:34 +10:00
Andrew Tridgell
5aa58d2ab5
Plane: support 3 magnetometers
2014-07-04 12:49:25 +10:00
Randy Mackay
ac65119cfe
Plane: use common Log_Write_Camera
...
pair programmed with Craig Elder
2014-06-17 14:11:47 +10:00
Randy Mackay
2a298d0ea4
Plane: remove RALLY_WP_SIZE definition
2014-04-19 15:00:32 +09:00
Andrew Tridgell
1bce4239a3
Plane: added AUTOTUNE flight mode
...
this is just like FBWA, but with automatic roll/pitch tuning
2014-04-12 14:12:14 +10:00
Emile Castelnuovo
a111d174c1
Plane: added VRBRAIN #defines and #includes
2014-04-08 16:19:20 +10:00
Andrew Tridgell
e19341ca32
Plane: convert to new GPS driver API
2014-04-01 06:38:24 +11:00
Michael Day
25f23cf16c
Plane: Sends MAV_SYS_STATUS_GEOFENCE and also allows GCS to enable/disable fence.
2014-03-27 09:26:20 +11:00
Andrew Tridgell
e8b9f22b01
Plane: updates for GPS changes
2014-03-24 12:04:31 +11:00
Randy Mackay
790a907811
Plane: use Dataflash lib's Log_Write_Cmd
2014-03-19 12:12:08 +09:00
Randy Mackay
693ce27bf6
Plane: pass eeprom start to Mission constructor
2014-03-19 12:11:58 +09:00
Randy Mackay
0827506533
Plane: remove unused WAIT_COMMAND
2014-03-19 12:11:24 +09:00
Randy Mackay
e88f1953d0
Plane: use common location options masks
2014-03-19 12:10:21 +09:00
Andrew Tridgell
1001df0e56
Plane: removed extra log enum
2014-02-15 05:48:23 +11:00
Andrew Tridgell
a7faa58879
Plane: fixed up merge errors
2014-02-15 05:48:23 +11:00
Andrew Tridgell
2817a11f23
Plane: added AHR2 and SIM logging
2014-02-15 05:48:14 +11:00
Andrew Tridgell
e39247868c
Plane: cleanup HIL defines
2014-02-15 05:29:46 +11:00
Andrew Tridgell
2cd6efa23e
Plane: added DF logging of secondary AHRS solution
2014-02-15 05:29:45 +11:00
Paul Riseborough
d6ead64083
Plane : Additional NavEKF flash logging
2014-02-15 05:28:08 +11:00
Andrew Tridgell
ce9047cec5
Plane: added dataflash logging of EKF data
2014-02-15 05:28:07 +11:00
Andrew Tridgell
dfa95b3464
Plane: moved the always log flag to 1<<16
...
this prevent problems with transferring the bitmask as a float
2014-02-14 21:51:00 +11:00
Andrew Tridgell
906fc17905
Plane: added baro and airspeed logging
...
including raw temperature and pressure values
2014-01-28 10:35:59 +11:00
Andrew Tridgell
3a5fb46dc2
Plane: fixed integer size problem on APM2
2014-01-14 21:27:39 +11:00
Andrew Tridgell
8755747da0
Plane: only log when armed by default
...
use safety switch if arming not enabled
2014-01-14 13:07:43 +11:00
Andrew Tridgell
263f3b116b
Plane: added FS_GCS_ENABL==2 option
...
this allows GCS failsafe when the GCS isn't getting updates from the
aircraft
2013-12-20 11:39:00 +11:00
Andrew Tridgell
508817d617
Plane: moved ap_message into GCS.h
2013-12-17 11:51:35 +11:00
Michael Day
b0a0316dd6
Plane: Now using AP_Arming library.
2013-12-11 17:29:23 +11:00
Andrew Tridgell
6ed21c12db
Plane: added logging of 2nd compass
2013-12-10 15:32:11 +11:00
Andrew Tridgell
6b4a3ef98b
Plane: added MAVLink sonar logging
2013-11-28 21:49:27 +11:00
Andrew Tridgell
5a0cb5dea4
Plane: added sonar logging to dataflash
2013-11-28 21:49:27 +11:00
Andrew Tridgell
a05a32dbda
Plane: added RCIN and SRVO logging
2013-11-26 09:04:43 +11:00
Andrew Tridgell
3289041428
Plane: added MAVLink SYSTEM_TIME message
2013-10-24 14:22:47 +11:00
Andrew Tridgell
e6af7dad3d
Plane: switched to L3G4200D driver for Linux
2013-10-08 11:50:54 +11:00
Michael Day
497c95de8e
Plane: Add support for rally points.
...
Added parameter RALLY_TOTAL.
Added handlers for new MAVLink messages RALLY_POINT and
RALLY_FETCH_POINT.
defines.h modified to make room in EEPROM to store rally points.
rally.pde added and is responsible for ensuring rally points get
stored in the correct spot in EEPROM.
Multiple Rally/RTL point support now done. If rally points have
been defined, then when RTL mode is entered, the closest Rally
point is chosend and the plane loiters at that point.
Note only 10 rally points can be defined; this is to save space in
the APM's EEPROM.
2013-10-03 12:21:08 +10:00
Randy Mackay
9388ea3848
Plane: integrate BattMonitor exhausted method
...
BatteryMonitor object made static
Removed unused macros for battery voltage and current monitoring
2013-10-03 11:16:21 +09:00
Andrew Tridgell
287db19119
Plane: updates for Stub -> HIL
2013-09-28 22:04:15 +10:00
Mike McCauley
aa800472be
Plane: defines.h added Flymaple INS
2013-09-24 13:51:28 +10:00
Andrew Tridgell
51b9cf3e76
Plane: move failsafe variables into a structure
...
this makes the logic a bit easier to follow
2013-07-22 12:50:00 +10:00
Andrew Tridgell
dbd47b2a30
Plane: make TECS the default speed/height controller
2013-07-15 11:12:24 +10:00
Andrew Tridgell
113bc20f8a
Plane: added a new CRUISE flight mode
...
See
http://diydrones.com/group/apmusergroup/forum/topics/feature-request-hold-heading-mode
this fixes issue #438
2013-07-13 21:45:58 +10:00
Andrew Tridgell
f300df5fd1
Plane: added FS_LONG_TIMEOUT and FS_SHORT_TIMEOUT parameters
...
this is to address the issue raised here:
http://diydrones.com/forum/topics/ardupilot-circle-mode
2013-07-12 11:56:04 +10:00
Andrew Tridgell
608007361b
Plane: added initial implementation of ACRO mode
...
rate based control with attitude locking
2013-07-11 09:10:41 +10:00
Andrew Tridgell
3c177867a4
Plane: allow enable/disable of camera log messages in CLI
2013-07-10 12:23:36 +10:00
Paul Riseborough
d62636d309
Plane: added new TECS altitude controller
...
Includes improvements to takeoff/launch detect logic to support hand
launching for X-8 flight
2013-07-04 16:56:57 +10:00
Andrew Tridgell
a1f64d606a
Plane: fixed remaining places where primary channel ordering was assumed
...
should now use rcmap for all inputs
2013-06-03 16:23:48 +10:00
Andrew Tridgell
b940c4b28e
Plane: use library gcs_severity
2013-05-09 09:28:57 +10:00
Andrew Tridgell
4e2b88f6e6
Plane: added ATT_CONTROLLER option to select attitude controller
...
set to 1 for the new APM_Control library
2013-05-05 21:51:09 +10:00
Andrew Tridgell
3d7a4d0e6e
Plane: added ELEVON_OUTPUT option
...
this is like the vtail mixer, but for elevons
2013-04-29 12:13:59 +10:00
Andrew Tridgell
0c5b393919
Plane: added compass logging
2013-04-20 13:52:36 +10:00
Andrew Tridgell
c56f338fe0
Plane: convert to new logging system
2013-04-20 13:52:36 +10:00
Andrew Tridgell
c8af70a18d
Plane: make the plane code compatible with the new logging system
...
not actually converted yet
2013-04-20 13:52:36 +10:00
Andrew Tridgell
575f346e85
Plane: removed HIL_MODE_ATTITUDE
...
we really need full sensors for HIL with the L1 controller. The flight
is also _much_ better with sensors HIL.
2013-04-12 17:44:40 +10:00