eee2da01ac
Arducopter: each motors_ pde uses APM_RC.SetFastOutputChannels
2011-11-25 20:00:18 -08:00
f397bae793
ArduCopter Alt Hold - Change to not run get_nav_throttle if manually adjusting altitude with manual_boost - removes possibility of I term running up
...
Tuning - added ability to modify altitude (position, not rate) controller
TradHeli - Fairly large change to how throttle is scaled and collective moves.
2011-11-20 22:30:42 +09:00
c8d2341156
TradHeli - automatically reinitialise swash plate if HSV_MAN is switched from 1 to 0.
...
Turn-off feed forward correction to yaw based on collect when in HIL mode.
2011-11-17 20:43:07 +09:00
2112f74324
TradHeli - reversed the direction of "phase angle" to make it more intuitive. This parameter is used to correct for a heli's tendency to lean left or right when the pilot gives it a pitch forward command.
2011-11-13 22:40:46 +09:00
70aadd4afc
TradHeli - added two parameters to improve heli control.
...
heli_phase_angle allows pilot roll/pitch command to be translated into mixed roll and pitch.
heli_coll_yaw_effect mixes some collective into the yaw so tail can counter act collective movements more easily.
2011-11-13 22:20:57 +09:00
a7038cbaf9
TradHeli - new parameter HSV_MAN to allow better set-up from APMissionPlanner. Also changed swash movement to use radio_out which fixes some setup bugs
2011-11-12 23:23:07 +09:00
12f5f3f96e
TradHeli - fix to allow tail servo to be reversed. Also increase max movement of tail servo to 45 degrees.
2011-11-05 12:31:30 +08:00
ea66c74ff0
TradHeli - added throttle scaling and heli specific angle_boost function that takes into account that heli's main blades can have -ve pitch.
2011-10-29 17:27:43 +09:00
142707711e
Updates to guided mode from Michael O.
...
removed or commented unused static vars
2011-10-15 13:09:04 -07:00
b5ea05698e
TradHeli - added servo averaging to allow support of analog servos
...
- moved heli parameters to 80 because they were causing flight modes to overlap with waypoints
2011-09-25 16:51:25 +09:00
ddb4de1949
TradHeli - fix to set motor_auto_armed = true if throttle > 0. Required to let ALT_HOLD work!
2011-09-25 12:30:37 +09:00
1456a2a912
renamed top level directories
...
ArduCopterMega -> ArduCopter
added archives directory for old code
2011-09-09 11:27:41 +10:00
Pat Hickey
Randy Mackay
unknown
Jason Short
Andrew Tridgell