Henry Wurzburg
8d86503ed5
AP_Motors: correct metadata for H_DDFP_SPIN_MIN param
2023-08-07 07:36:47 -04:00
Iampete1
3e246c9d25
AP_Motors: Heli: remove loop rate "RSC control mode change failed" meassage
2023-08-01 09:12:51 +09:00
Iampete1
c5f3d5a98b
AP_Motors: Heli: move heli parameter check to arming check
2023-08-01 09:12:51 +09:00
Iampete1
b327f00b25
AP_Motors: heli: move swash servo defualt and setup into swash lib
2023-07-18 08:05:26 +09:00
Iampete1
d32d1dfec8
AP_Motors: Heli: get output mask from swashplate lib
2023-07-18 08:05:26 +09:00
Iampete1
b61b761141
AP_Motors: Heli: move swashplate output state and code into swash lib
2023-07-18 08:05:26 +09:00
Iampete1
6717da708c
AP_MotorsHeli: swash: combine configure and calculate_roll_pitch_collective_factors functions
2023-07-18 08:05:26 +09:00
Iampete1
f55267017b
AP_Motors: Heli: Remove unused init_output return and don't assume single for initialised OK
2023-07-04 11:31:21 +10:00
Iampete1
c5733e7634
AP_Motors: Heli: remove _output_test_seq as used in motor test
2023-06-27 10:24:15 +10:00
bnsgeyer
1e521d1a5d
AP_Motors: Move DDFP thrust linearization params into sub group
2023-06-14 22:26:40 -04:00
bnsgeyer
270c6a2028
AP_Motors: Tradheli-fix servo4 param calls and ensure no divide by zero
2023-06-14 22:26:40 -04:00
bnsgeyer
cc89c1ac1a
AP_MotorsHeli: add thrust linearization for DDFP tails
2023-06-14 22:26:40 -04:00
Gone4Dirt
191ce55e1d
AP_MotorsHeli: Remove pure virtuals and unnecessary overrides
2023-05-08 19:05:17 -04:00
Iampete1
81f3d3edda
AP_Motors: Heli: get_output_mask return only motors
2023-05-05 22:20:16 -04:00
Bill Geyer
78720e9816
AP_MotorsHeli: patch for manual autorotation
2023-02-18 10:19:50 -05:00
Bill Geyer
40d18f46cf
AP_MotorsHeli: Change AROT_PCT to AROT_IDLE
2023-02-05 17:54:33 -05:00
Ferruccio1984
e935913f95
AP_Motors: Support for Autorotation implementation
...
-enables faster re-spool(user settable timer) after power engagement
-flare&touchdown controllers;
-rangefinder for distance from ground evaluation;
-higher refresh rate for rangefinder;
-attitude targets implementation for "guided" autorotation;
-retrieve zero lift collective position
2023-02-05 17:54:33 -05:00
Bill Geyer
93b0519ad2
AP_MotorsHeli: improve collective to yaw compensation
2022-12-22 07:07:34 -05:00
Leonard Hall
67205f8114
AP_Motors: Support changing update period
2022-12-13 17:10:06 +11:00
Iampete1
c1a9f75034
AP_Motors: params always use set method
2022-08-03 13:43:48 +01:00
Iampete1
43832649ec
AP_Motors: convert to 32 bit motor mask
2022-05-22 12:07:37 +10:00
Peter Barker
434f49e6b6
AP_Motors: correct initialised_ok state for HeliDual+Quad
...
initialised_ok was being set to false when frame/class was set as the
method was not overridden and thus Heli's set_frame_and_class was
setting initialised_ok to false. When the init_output method was called
it would be unconditionally reset to true.
2022-05-18 12:25:26 +09:00
Bill Geyer
f7b420f131
AP_Motors: move turbine start to update_turbine_start and style cleanup
2022-02-23 14:22:47 +09:00
Ferruccio1984
3a67b17142
AP_Motors: tradheli support for turbine start
2022-02-23 14:22:47 +09:00
Iampete1
5181003228
AP_Motors: always check armed and interlocked in motor test
2022-02-10 07:43:40 +09:00
MidwestAire
77f0fdf112
AP_Motors:clean up whitespace in heli motors class
2021-12-14 22:50:05 -05:00
Bill Geyer
05e8285f93
AP_Motors: use RPM singleton to get rpm in RSC
2021-12-14 22:50:05 -05:00
MidwestAire
42a131522b
AP_Motors:Heli - new rotor speed control modes for autothrottle governor
2021-12-14 22:50:05 -05:00
Bill Geyer
3b40df133e
AP_Motors: add spool down complete flag
2021-12-05 22:12:13 -05:00
Bill Geyer
d2c37daa66
AP_Motors: change internal variable names and methods for mid collective to be more accurate
2021-11-10 16:45:17 -05:00
Bill Geyer
d02097bf1c
AP_Motors: add protection for new tradheli parameters
2021-11-10 16:45:17 -05:00
Bill Geyer
1a50dce206
AP_Motors: coll setup uses actual blade pitch angle
2021-11-10 16:45:17 -05:00
Gone4Dirt
6dc100728f
AP_Motors: Fix spelling of autorotation flag
2021-02-08 22:09:49 -05:00
Peter Barker
8f8283e0f0
AP_Motors: rc_map_mask -> motor_mask_to_srv_channel_mask
...
the naming of this function precedes our rc/srv-channel split
2021-01-05 10:19:32 +11:00
bnsgeyer
09b9ad83dc
AP_Motors: tradheli - add support to determine below mid collective
2020-12-21 23:33:48 -05:00
bnsgeyer
6c8a85ee04
AP_Motors: updates to new integrator and make selectable
2020-12-21 23:33:48 -05:00
bnsgeyer
84fb3afbcb
AP_Motors: Tradheli support for integrator management and hover collective learning
2020-12-21 23:33:48 -05:00
Peter Barker
41ab59dcdb
AP_Motors: eliminate flags structure
...
Saves about 44 bytes
2020-09-22 20:26:24 +10:00
Gone4Dirt
b2d2bf61da
AP_Motors: Support autorotation windows on external governors
2020-05-20 21:56:09 -04:00
bnsgeyer
2a8e2d19fa
AP_Motors: Tradheli-incorporate DDFP for counter clockwise rotating rotors
2019-12-16 10:48:09 +09:00
bnsgeyer
e193c45946
AP_Motors: tradheli-update parameter display names
2019-12-10 12:21:56 +09:00
Gone4Dirt
98a4335af4
AP_Motors: Added support for autorotation
2019-11-29 08:06:10 +08:00
Peter Barker
ef6a34a9f0
AP_Motors: use enum-class for SRV_CHANNEL_LIMIT_TRIM and friends
2019-11-26 10:17:17 +11:00
bnsgeyer
05a30c756a
AP_Motors: tradheli- fix metadata
2019-11-20 12:17:36 +08:00
bnsgeyer
417570df70
AP_Motors: tradheli - TAIL_SPEED metadata correction
2019-11-18 08:21:40 +08:00
bnsgeyer
d4fec221c3
AP_Motor: tradheli align swash params btwn frames and fix metadata
2019-09-25 14:59:02 +09:00
bnsgeyer
e91402aeb6
AP_Motors: tradheli-make all RSC params part of library
...
AP_Motors: Tradheli-fix RSC mode change while armed
AP_Motors: tradheli - improve RSC param metadata
AP_Motors: tradheli-put all throttle param settings in percent
2019-09-13 08:53:54 +09:00
Leonard Hall
036b47ec56
AP_Motors: Add seperate roll and pitch limits
2019-08-03 12:06:32 +09:00
ChristopherOlson
fc84995fb9
AP_Motors:Heli - remove H_LAND_COL_MIN and replace with H_COL_MID
2019-06-04 09:48:03 +09:00
ChristopherOlson
b6bfc8947f
AP_Motors:Heli Governor - change rotor_rpm argument to a float
2019-06-03 07:53:01 +09:00