Iampete1
347723dbaf
AP_GPS: add primary param
2020-11-10 12:01:56 +11:00
Michael du Breuil
4161e2eb28
AP_GPS: Factor out moving base offset helper
2020-11-03 11:12:20 +11:00
Andrew Tridgell
e995a198bd
AP_GPS: always send GPS2_RAW if 2nd GPS configured
...
this improves the display on the GCS when the GPS has not yet been
found. This is particularly important after a reboot, as otherwise the
GCS may display stale information from the previous boot
2020-10-06 16:48:19 +11:00
Andrew Tridgell
8c1bc94053
AP_GPS: fixed build warnings for MSP with AP_Periph
2020-09-15 09:40:03 +10:00
yaapu
85b61d6bf3
AP_GPS: added support for MSP GPS sensors
2020-09-09 06:35:50 +10:00
Andrew Tridgell
5647aadbcf
AP_GPS: added API for getting last iTOW
2020-09-09 06:35:50 +10:00
Andrew Tridgell
87c7781be2
AP_GPS: show GPS as unhealthy if it is lagged too much
...
this detects GPS data lag, and if 5 samples in a row are lagged by
more than 50ms beyond the expected lag for the GPS then we declare the
GPS as unhealthy.
This is useful to detect users who have asked for more data from the
GPS then it can send at the baudrate that is being used. The case that
led to this path was a F9 GPS with GPS_RAW_DATA=1 at 115200 baud. In
that case the UART data is quickly lagged by over 1s
2020-08-25 10:22:05 +10:00
Michael du Breuil
08d4e1c062
AP_GPS: Support configuring the SBF com port
2020-08-13 15:04:38 +10:00
Tom Pittenger
8f6e9caf93
AP_GPS: change GPS_AUTO_SWITCH #define list to enum class
...
enumeration entry had to change to NONE to avoid name conflict with DISABLED
2020-06-25 11:10:31 +10:00
Andrew Tridgell
4aa10a6c30
AP_GPS: added force_disable_yaw() API
2020-06-18 15:01:00 +10:00
Andrew Tridgell
36098c3221
AP_GPS: improved delay health threshold
...
allow for missing frames without showing unhealthy on GCS
2020-04-21 15:30:54 +10:00
Andrew Tridgell
3397ed766d
AP_GPS: enable ublox moving baseline compilation option
...
disable for HAL_MINIMIZE_FEATURES and if max receivers 1. This fixes
the f103-GPS AP_Periph build
2020-04-21 15:30:54 +10:00
Andrew Tridgell
7027eecd34
AP_GPS: added GPS_DRV_OPTIONS
...
this allows for configuration of moving baseline with either uart1 or
uart2 for the RTCM data. Using uart2 requires an extra cable between
the two modules, but requires less uart bandwidth which is good when
DMA channels are low. Using uart2 also avoids the rtcmv3 parser, which
saves memory
2020-04-21 15:30:54 +10:00
Andrew Tridgell
f00314a5d1
AP_GPS: removed dead blending code
2020-03-17 12:13:54 +11:00
Andrew Tridgell
7efd5248ee
AP_GPS: added get_type() API
2020-01-26 09:12:55 +11:00
Andrew Tridgell
cf8becfa71
AP_GPS: make all semaphores recursive
...
the cost is very similar and this prevents an easy coding error which
can occur on less used code paths
2020-01-19 20:19:30 +11:00
Andrew Tridgell
f0d1d3fa90
AP_GPS: added get_semaphore()
2020-01-16 20:36:54 +11:00
Andrew Tridgell
db777c56b9
AP_GPS: provide yaw feedback in GPS_RAW_INT and GPS2_RAW
...
allow GPS to display status of GPS yaw for moving baseline and NMEA
2020-01-07 12:37:35 +11:00
Andrew Tridgell
261465ef96
AP_GPS: split out update_primary() from update()
...
this makes the selection of primary GPS a lot clearer, with less
nesting of if statements
2020-01-07 12:37:35 +11:00
Andrew Tridgell
93aaf98672
AP_GPS: added automatic u-blox moving baseline configuration
...
this uses GPS_TYPE and GPS_TYPE2 to setup two u-blox F9 receivers in a
RTK moving baseline configuration
2020-01-07 12:37:35 +11:00
Michael du Breuil
f8808022b8
AP_GPS: Check the driver logging health
2019-11-20 11:06:16 -07:00
Andrew Tridgell
632114d687
AP_GPS: support RTCMStream for RTCM injection on UAVCAN
2019-11-09 17:11:32 +11:00
Michael du Breuil
d623da0de6
AP_GPS: Always send GPS2_RAW after we've seen the second GPS
...
This significantly improves the GCS's ability to correctly display whats
happening with the second GPS.
2019-11-02 10:35:08 +11:00
Andrew Tridgell
14cdac9202
AP_GPS: fixed GPS to UART mapping
...
this allows for first GPS as UAVCAN and 2nd as UART. That is not
possible currently unless you waste a uart
2019-10-24 14:37:30 +11:00
Michael du Breuil
2587b13ae7
AP_GPS: UBLOX: Parse RELPOSNED messages
...
This does not yet:
- validate the receiver configuration
- manage timing out stale GPS heading info
- relPosNormalized usage isn't clear, which may defeat the STRICT_LENGTH_CHECK
2019-10-15 11:06:11 +11:00
Andrew Tridgell
291d72601b
AP_GPS: enabled reduced size for AP_Periph support
2019-08-27 10:29:56 +10:00
Michael du Breuil
d33006a2e7
AP_GPS: Refactor first_unconfigured_gps to return bool
2019-07-30 10:12:43 +10:00
Pierre Kancir
13ac187fd8
AP_GPS: pass mavlink_message_t by const reference
2019-07-16 20:51:42 +10:00
Grant Morphett
64ed76326b
AP_GPS: Adding support for the NMEA GPHDT sentence
...
The NMEA GPHDT sentence can be used to determine the vehicles bearing
instead of a compass even when the vehicle is stationary. This type
of GPS is normally very expensive and does the bearing using some sort
of phase ambituity algorithm.
2019-07-13 11:05:57 +10:00
Michael du Breuil
e6d97f63a5
AP_GPS: Remove unneeded wrappers
2019-04-26 08:07:19 +10:00
Michael du Breuil
27ad9ac3ca
AP_GPS: Refactor get_singleton() to return a pointer
2019-04-05 23:09:47 -07:00
Michael du Breuil
52eb832883
AP_GPS: Remove stuff from headers
2019-04-05 20:12:53 +11:00
Tom Pittenger
12c3446777
AP_GPS: rename dataflash to logger
2019-03-28 16:40:57 +11:00
Francisco Ferreira
5a64f8d8ba
AP_GPS: use proper macro in array sizes
2019-03-07 19:48:32 -07:00
Tom Pittenger
5d66c3ed62
AP_GPS: unify singleton naming to _singleton and get_singleton()
2019-02-10 19:09:58 -07:00
Peter Barker
b47733142f
GLOBAL: rename DataFlash_Class to AP_Logger
2019-01-18 18:08:20 +11:00
Peter Barker
30980815a8
AP_GPS: adjust for Location_Class and Location unification
2019-01-16 11:45:29 +11:00
Arjun Vinod
978cea97cf
AP_GPS: whitespace and typo fixes
2019-01-05 08:45:24 +09:00
Andrew Tridgell
3fe4b9c0f8
AP_GPS: make GPS packet timestamps more accurate
...
this reduces the effect of processing time and uart transmit time
2018-12-04 11:37:38 +11:00
Andrew Tridgell
2512b73106
AP_GPS: added ability to disable GPS
...
this is used for GPS loss testing in real vehicles, by linking it to a
RCn_OPTION value. GPS position is still logged, but is not used
2018-11-29 08:49:23 +11:00
Michael du Breuil
cca6b54921
AP_GPS: Remove unneeded field limitations
...
Saves ~1100 bytes of flash
2018-08-01 09:19:20 +10:00
Andrew Tridgell
796291f176
AP_GPS: improved ccache build speed
...
making this header equal improves speed of fmuv2 build after fmuv3
build with ccache, without affecting binary
2018-06-22 11:13:03 +10:00
Peter Barker
5b41db5120
AP_GPS: use AP_RTC
...
set the system time from a GPS if we have a 3D fix or better
2018-06-15 08:01:22 +10:00
Francisco Ferreira
5fc7da0e83
AP_GPS: remove Qualcomm board support
2018-05-17 09:57:20 +10:00
Peter Barker
643e7e039a
AP_GPS: log received data
...
Also log a set of flag values if a driver is deleted
2018-04-18 13:50:55 +09:00
Andrew Tridgell
d2c9e2719e
AP_GPS: removed create() method for objects
...
See discussion here:
https://github.com/ArduPilot/ardupilot/issues/7331
we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach
Thanks to assistance from Lucas, Peter and Francisco
2017-12-14 08:12:28 +11:00
Peter Barker
693823ae0d
AP_GPS: add gps() to AP:: namespace
2017-11-15 13:43:03 +00:00
Michael du Breuil
236e74c529
AP_GPS: Singleton
2017-11-06 01:33:57 +00:00
Michael du Breuil
c856cc6f33
AP_GPS: Allow GPS's to run functions on arming (used by SBF)
...
Supports starting/stopping GPS logging
2017-11-06 01:33:57 +00:00
Dr.-Ing. Amilcar Do Carmo Lucas
bf6778277e
AP_GPS: implement GPS*_RTK mavlink messages
2017-10-30 18:28:20 +00:00