Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
5,749 Commits 71 Branches 509 Tags 756 MiB
Commit Graph

25 Commits

Author SHA1 Message Date
Andrew Tridgell 8652bfee8d APM: added RSSI_PIN option for receiver RSSI 
this allows you to configure the pin for receiver RSSI without
recompiling
 2012-11-06 22:04:41 +11:00
Andrew Tridgell f828956cb8 battery: use set_pin() to allow pins to be changed at runtime 2012-10-16 17:20:49 +11:00
rmackay9 775489d658 ArduPlane: added BATT_VOLT_PIN and BATT_CURR_PIN parameters to allow support for new 3DR IV battery monitor 2012-10-13 20:51:41 +09:00
Andrew Tridgell 2324997e16 APM: added ALT_OFFSET parameter 
useful to adjust for barometric pressure changes during a long flight
 2012-09-19 16:23:25 +10:00
Andrew Tridgell 6ab2a861f7 APM: added RSSI to RC_CHANNELS_RAW as well 
and prevent double read
 2012-08-22 13:58:25 +10:00
Andrew Tridgell c0c0b8c976 APM: added RECEIVER_RSSI_PIN option 
this allows for the receiver RSSI to be sent over MAVLink

Thanks to Burt Green for the suggestion
 2012-08-22 13:33:12 +10:00
uncrustify 5267ea6aad uncrustify ArduPlane/sensors.pde 2012-08-21 18:58:40 -07:00
Andrew Tridgell 034fb5b194 APM: fixed hil build 2012-08-16 12:53:37 +10:00
Andrew Tridgell c960db7af5 APM: allow for separate calibration of airspeed/barometer 
this is useful just before takeoff, to account for temperature changes
 2012-08-15 19:49:09 +10:00
Jonathan Challinger 7815e3d810 APM: fixed rounding of altitude 
the cast was rounding to the nearest meter
 2012-08-08 12:07:35 +10:00
Andrew Tridgell de3c9ce56d Airspeed: change APM to use new AP_Airspeed library 
the next step is AHRS dead reckoning
 2012-07-16 11:21:50 +10:00
Andrew Tridgell 82ede937e7 AnalogSource: convert analogRead() calls to the new API 
this should give us much better analog values, plus save a bunch of
CPU time
 2012-07-01 15:01:05 +10:00
Andrew Tridgell 5bccfbd94c Barometer: fixed airstart for APM 
we need to re-load the ground pressure and temperature from eeprom on
and airstart
 2012-06-27 16:01:50 +10:00
Andrew Tridgell 6639294c72 APM: update for new barometer interface 
the barometer can now calibrate and return altitude values.

A 0.3 low pass filter is used on altitude to match the previous code
 2012-06-27 16:01:50 +10:00
Doug Weibel 762a5550de Remove a debugging print 2012-01-15 16:37:07 -07:00
Doug Weibel 69c7598db2 Update battery monitoring code for ArduPlane 
Fixes compatibility for APM2.  Also a significant update to the battery monitoring code:  We previously had monitoring modes for individual cell voltages for 3 and 4 cell lipos.  These have been removed as they were never really supported (the cell voltages were computed but were not reported or recorded anywhere).  Also, some clean-up/prep work was done for supporting monitoring 2 separate battery packs.  The CLI battery and current monitoring tests were consolidated into 1 test.
 2012-01-15 16:10:28 -07:00
Andrew Tridgell cd3729d993 APM: added error checking on barometer read 
if the barometer is dead and the GPS has a fix, use the GPS for
altitude
 2011-12-28 20:41:53 +11:00
Andrew Tridgell df094ce463 fixed airspeed sensor for ArduPlane on APM2 
we were trying to use a non-existant ADC chip!
 2011-12-17 07:29:09 +11:00
Andrew Tridgell 0a7332b6e3 airspeed: smooth the airspeed value a bit more 
the value is very noisy in my tests. A bit more smoothing may help
 2011-12-12 15:14:55 +11:00
Andrew Tridgell 011110e1dd airspeed: use floating point values and better averaging in zero_airspeed() 
this makes the calibration of airspeed a bit more accurate, and
prevents truncation of airspeed values
 2011-12-12 15:14:55 +11:00
Andrew Tridgell d5c23c83cf apm2: fixed for new barometer code 2011-12-11 15:21:10 -08:00
Pat Hickey f7a9b8a563 ArduPlane: LED digital writes use LED_OFF and LED_ON 2011-11-25 20:00:19 -08:00
Michael Oborne 7ef51f723d Sensor hil fix's 2011-10-13 22:22:03 +08:00
Andrew Tridgell e61d742345 GCS: make the two GCS links gcs0 and gcs3 
the artifical separation between 'gcs' and 'hil' just leads to
confusion. This also simplifies the code a bit more, and saves us a
bit more text
 2011-09-19 11:04:02 +10:00
Andrew Tridgell e0dc1271d6 imported ArduPlane from ArduPilotMega svn 2011-09-09 11:29:39 +10:00