Andrew Tridgell
d18277487e
HAL_ChibiOS: use RCIN pin for only PPM only on iomcu
...
use uarts for SBUS and other serial protocols
2018-11-07 07:35:45 +11:00
Andrew Tridgell
7c1ba15031
HAL_ChibiOS: fixed syntax error on RCIN pin for iomcu
2018-11-07 07:35:45 +11:00
Andrew Tridgell
86ab3d7669
HAL_ChibiOS: turn off green ring LED on cube
2018-11-07 07:35:45 +11:00
Andrew Tridgell
fcc259ae31
HAL_ChibiOS: separate out F1 CR1 calculations
...
and modify pin speeds for iomcu uarts
2018-11-07 07:35:45 +11:00
Andrew Tridgell
7e66bb69b9
HAL_ChibiOS: enable amber LED on iomcu
2018-11-07 07:35:45 +11:00
Andrew Tridgell
3ab1cd4808
HAL_ChibiOS: fixed build
2018-11-07 07:35:45 +11:00
Eugene Shamaev
032c5ab707
AP_HAL_ChibiOS: Binding update for DSM
2018-11-07 07:35:45 +11:00
Andrew Tridgell
f69360844f
HAL_ChibiOS: enable USART1 for iomcu for spektrum input
2018-11-07 07:35:45 +11:00
Andrew Tridgell
065dba973b
HAL_ChibiOS: fixed build warning on iomcu
2018-11-07 07:35:45 +11:00
Andrew Tridgell
81fe8b7138
HAL_ChibiOS: allow set of safety mask from IOMCU
2018-11-07 07:35:45 +11:00
fat_dell
d1f557e96b
HAL_ChibiOS: added Omnibusf4v6 board, based on omnibusnanov6.
2018-11-04 22:00:15 +11:00
Andrew Tridgell
49ce9d02b1
HAL_ChibiOS: ensure RC in channels are bounded
2018-11-02 22:52:25 +11:00
vierfuffzig
e04ebb1326
HAL_ChibiOS: set BATT_MON default on boards with onboard volt/curr sens
2018-10-31 21:29:33 +11:00
Andrew Tridgell
78a32df2e7
HAL_ChibiOS: make all boards base GPIOs for servos at 50
...
this makes the docs for GPIO pins consistent across boards
2018-10-31 20:10:52 +11:00
fnoop
deeaf6ec09
AP_HAL_ChibiOS: Add UARTS to F405-Wing bootloader
...
AP_HAL_ChibiOS: Add pins to support new UART_ORDER uarts
AP_HAL_ChibiOS: Add UARTs to F405-Wing hwdef-bl.dat to support firmware upload on UARTS
2018-10-31 16:01:39 +11:00
Peter Barker
d2cf065fdf
AP_HAL_ChibiOS: return uart link bandwidth
2018-10-30 19:31:37 +11:00
Andrew Tridgell
7e777d8b28
HAL_ChibiOS: disable loop() delay for iofirmware
2018-10-30 13:00:48 +11:00
Andrew Tridgell
6c761fa864
HAL_ChibiOS: shutdown IOMCU on reboot
2018-10-30 13:00:48 +11:00
Andrew Tridgell
b3946fc458
HAL_ChibiOS: added uart for sbus out in IOMCU
2018-10-30 13:00:48 +11:00
Andrew Tridgell
af4340d1d1
HAL_ChibiOS: enable analog input on IOMCU
2018-10-30 13:00:48 +11:00
Andrew Tridgell
a6b35d6496
HAL_ChibiOS: restore old ODR behaviour for F4 boards
...
This fixes an issue with ESP8366 on Pixracer
2018-10-30 12:49:16 +11:00
Andrew Tridgell
6dd44a6d35
HAL_ChibiOS: fixed LED mapping for fmuv4
2018-10-29 14:04:32 +11:00
vierfuffzig
895cc0713b
ChibiOS: fix F35Lightning default BATT_CURR_SCALE
2018-10-24 07:45:10 +10:00
Andrew Tridgell
d644150871
HAL_ChibiOS: fixes for DrotekP3Pro
2018-10-21 09:59:44 +11:00
Kevin Lopez Alvarez
6f99c706d6
HAL_ChibiOS: add MCU tables for STM32F469
2018-10-21 09:59:44 +11:00
Kevin Lopez Alvarez
bf745d1960
HAL_ChibiOS: add DrotekP3Pro hardware definitions
2018-10-21 09:59:44 +11:00
Phillip Kocmoud
44fb61da37
HAL_ChibiOS: mRo X2.1-777 / hwdef.dat
...
Set proper sensor orientation.
2018-10-21 07:50:44 +11:00
Andrew Tridgell
c622a4c4d6
HAL_ChibiOS: fixed output pins on F100 iomcu
2018-10-17 16:45:37 +11:00
Andrew Tridgell
7b67146bc4
HAL_ChibiOS: use less memory in SoftSigReader
2018-10-17 15:11:28 +11:00
Andrew Tridgell
d083cd87d6
HAL_ChibiOS: disable debug code by default for iomcu
...
use --enable-asserts instead
2018-10-17 15:11:28 +11:00
Andrew Tridgell
d7aaaa35bd
HAL_ChibiOS: disable RCIN and timer threads for iomcu
2018-10-17 15:11:28 +11:00
Andrew Tridgell
8a4e0bd58c
HAL_ChibiOS: fixed RCIN for iomcu
...
we need to disable/re-enable DMA on each IRQ for the STM32F10x
2018-10-17 15:11:28 +11:00
Andrew Tridgell
15141a6a5a
HAL_ChibiOS: allow for no RCIN or TIMER thread
...
saves memory on iomcu
2018-10-17 15:11:28 +11:00
Andrew Tridgell
4674a1c68d
HAL_ChibiOS: fixed system time for clocks other than 1MHz
...
needed for IOMCU
2018-10-17 15:11:28 +11:00
Andrew Tridgell
298a91ac7c
HAL_ChibiOS: allow reduction of memory for SoftSigReader
...
for IOMCU
2018-10-17 15:11:28 +11:00
rain-er
565b370330
UART4 added for BLHeli ESC telemetry
2018-10-17 13:57:19 +11:00
Andrew Tridgell
4416404137
HAL_ChibiOS: removed hal.util->new_semaphore()
...
replaced with HAL_Semaphore
2018-10-17 12:54:22 +11:00
Phillip Kocmoud
f1d223a32a
HAL_ChibiOS: Add support for the mRo X2.1-777
...
a new flight controller from Mayan Robotics based on the x2.1 upgraded to a STM32F777 MCU
2018-10-16 09:37:39 +11:00
vierfuffzig
2243c524db
Chibios: Add board FuriousFPV F35Lightning
2018-10-12 20:28:50 +11:00
Andrew Tridgell
bcc1bd9752
HAL_ChibiOS: added realloc implementation
...
needed for AP_Scripting
2018-10-09 10:08:52 +11:00
Michael du Breuil
8382d377bd
AP_HAL_ChibiOS: Add a BUFSIZ value
2018-10-09 10:08:52 +11:00
Michael du Breuil
11ab6c59e1
AP_HAL_ChibiOS: Handle scripting priority
2018-10-09 10:08:52 +11:00
Randy Mackay
c1ab3afb6c
AP_HAL_ChibiOS: fix safety switch option handling
2018-10-04 16:13:24 +10:00
Andrew Tridgell
8c391291a3
HAL_ChibiOS: fixed a race in DShot code
...
this fixes a problem found by Daniel Met with the copter 3.6 beta
release
2018-10-03 15:28:07 +10:00
Michael du Breuil
9a48a0835e
AP_HAL_ChibiOS: Don't redefine errno
2018-10-03 08:01:13 +10:00
Michael du Breuil
f810b7b9f6
AP_HAL_ChibiOS: Make getcwd() take size_t as per the standard
2018-10-02 06:04:40 +10:00
Michael du Breuil
7fda309d3c
AP_HAL_ChibiOS: Remap unused pins to ADC
2018-09-20 01:07:47 +01:00
Siddharth Purohit
8ac38d73f7
HAL_ChibiOS: add option for NO_FASTBOOT build and enable it for iomcu
2018-09-19 12:14:15 +10:00
Siddharth Purohit
6622c9b8fd
HAL_ChibiOS: wrap sscanf and snprintf methods
2018-09-19 12:14:15 +10:00
Siddharth Purohit
05539cd93b
HAL_ChibiOS:remove print statement left over from previous changes
2018-09-19 12:14:15 +10:00
Siddharth Purohit
2d1153081c
HAL_ChibiOS: do not build float support for bootloader builds
2018-09-19 12:14:15 +10:00
Siddharth Purohit
f9149f45b2
HAL_ChibiOS: explicitly mention if RTC not available
2018-09-19 12:14:15 +10:00
Siddharth Purohit
22f74b0827
HAL_ChibiOS: add option to set iomcu firmware environment var
2018-09-19 12:14:15 +10:00
Siddharth Purohit
42b4730d88
HAL_ChibiOS: add changes to hwdef to support STM32F1 based controller
2018-09-19 12:14:15 +10:00
Siddharth Purohit
1a20fb4ea9
HAL_ChibiOS: disable flash methods where there is no Flash API support
2018-09-19 12:14:15 +10:00
Siddharth Purohit
847aca3c30
HAL_ChibiOS: reduce signal transitions count to save RAM
2018-09-19 12:14:15 +10:00
Siddharth Purohit
b9319cae56
HAL_ChibiOS: disable segments relating to unused features
2018-09-19 12:14:15 +10:00
Siddharth Purohit
87a2dea9d4
HAL_ChibiOS: disable features that require advanced dma
2018-09-19 12:14:15 +10:00
Siddharth Purohit
0f07480faf
HAL_ChibiOS: continue main_loop branching from main instead of allocating a separate thread
2018-09-19 12:14:15 +10:00
Siddharth Purohit
e824a9c360
HAL_ChibiOS: add hwdef files to support IOMCU
2018-09-19 12:14:15 +10:00
Andrew Tridgell
340f1b43e6
HAL_ChibiOS: fixed RSSI voltage from IOMCU
2018-09-15 16:08:32 +10:00
Andrew Tridgell
8c33b4b97d
HAL_ChibiOS: implement set_failsafe_pwm()
2018-09-13 08:15:02 +10:00
Andrew Tridgell
490d6eea20
HAL_ChibiOS: fixed ADC bug
...
this caused bad analog readings when the number of channels being read
was more than the number of hw channels
thanks to @vierfuffzig for reporting!
2018-09-12 07:10:04 +10:00
s0up
066cf90111
HAL_ChibiOS: Add speedybee hardware definition
2018-09-07 08:33:35 +10:00
Paul Atkin
bb99165221
HAL_ChibiOS: updates for KakuteF7
...
fixed PWM and added full tonealarm support
2018-09-06 10:11:34 +10:00
Andrew Tridgell
a9e29f7556
HAL_ChibiOS: added pullup/pulldown support on GPIO
...
using the convention of write() on an input pin to set pullup/pulldown
2018-09-06 07:20:46 +10:00
Michael du Breuil
f6cb196d53
AP_HAL_ChibiOS: Remove unimplemented force_safety_no_wait()
...
ChibiOS doesn't implement the method, so there is nothing to be gained
by calling the function.
2018-09-04 10:23:18 +10:00
Hannes Verschore
fefde53d58
AP_HAL_ChibiOS: Fix comment in Device.cpp
...
This was decreased to 100 in b07c599bf2
. I assume it would be best to also update the comment.
2018-08-31 08:36:47 +09:00
Andrew Tridgell
8c962e6f0f
HAL_ChibiOS: use a larger TX buffer on USB
...
this is needed for fast log download on vehicles with 50Hz main loop
2018-08-28 08:50:50 +10:00
Andrew Tridgell
33076be585
HAL_ChibiOS: fixed handling of 16 bit timers
...
when we have a 16 bit timer then systime_t is 16 bit, and we need to
handle wrap of get_systime_us32()
2018-08-26 18:34:26 +10:00
Andrew Tridgell
dc20e2baed
HAL_ChibiOS: support recursive semaphores
2018-08-25 15:44:36 +10:00
Andrew Tridgell
db9a8f16ed
HAL_ChibiOS: enable terrain on Pixracer, minpx-v2 and mini-pix
2018-08-24 19:43:27 +10:00
Andrew Tridgell
5526dac4fc
HAL_ChibiOS: probe all i2c baros for revo-mini
...
this ensures we build this functionality in CI
2018-08-23 13:29:59 +10:00
Peter Barker
2209e4a697
AP_HAL_ChibiOS: new HAL functor-based methods
...
AP_HAL_ChibiOS: adjust for irq-type enumeration change
AP_HAL_ChibiOS: implement attach-AP_HAL::Proc to interrupt interface
2018-08-21 20:34:01 +09:00
Andrew Tridgell
d3af854949
HAL_ChibiOS: fixed bootloader build
2018-08-16 12:40:10 +10:00
Andrew Tridgell
dabdb969f6
HAL_ChibiOS: added support for HAL_Semaphore type
2018-08-16 12:40:10 +10:00
Alexander Malishev
05099b8b8b
HAL_ChibiOS: restore default dataflash buffer size
...
This fix log corruption in copter
2018-08-15 10:15:09 +10:00
Francisco Ferreira
1b46104a98
AP_HAL_ChibiOS: fix warning when STDOUT is defined
...
../../libraries/AP_HAL_ChibiOS/UARTDriver.cpp:118:12: warning: 'int hal_console_vprintf(const char*, va_list)' defined but not used [-Wunused-function]
static int hal_console_vprintf(const char *fmt, va_list arg)
^
2018-08-14 10:17:38 +10:00
mirkix
c33b692f53
AP_HAL_ChibiOS: fix CubeYellow build
2018-08-14 06:26:22 +10:00
Francisco Ferreira
7278af05e0
AP_HAL_ChibiOS: remove CAN thread management
2018-08-12 13:35:01 +01:00
Francisco Ferreira
e1bf89f32d
AP_HAL_ChibiOS: fix CAN manager initialization
2018-08-12 13:35:01 +01:00
Andrew Tridgell
385f735799
HAL_ChibiOS: avoid 64 bit maths in AP_HAL::micros()
...
this saves a few cycles
2018-08-08 21:24:49 +10:00
vierfuffzig
bc52d430f9
Chibios add bootloader for mini-pix
2018-08-07 07:09:39 +10:00
Andrew Tridgell
846418e5e9
HAL_ChibiOS: raise timer thread priority
...
needs to be above main for guaranteed DShot and oneshot output periods
2018-08-06 11:41:42 +10:00
Andrew Tridgell
3df2a1c228
HAL_ChibiOS: fixed dshot bad frames
...
adding a pre-bit on the DMAR, and ensuring that all groups are setup
for DMA together fixes the remaining bad frames reports in BLHeli32
2018-08-04 19:29:13 +10:00
Andrew Tridgell
946b4db0e6
HAL_ChibiOS: set min dshot separation to 100usec
...
this fixes a problem with BLHeli32 not recognising dshot
2018-08-04 19:29:13 +10:00
Andrew Tridgell
22ba9a0aea
HAL_ChibiOS: fixed timeout of serial read bytes
...
this allows for fast timeout of serial read bytes in BLHeli pass-thru
2018-08-04 19:29:13 +10:00
Lucas De Marchi
668c941717
Global: use new version of ARRAY_SIZE
2018-08-04 15:31:55 +10:00
utkinpol
2912e732b4
HAL_ChibiOS: updated for KakuteF7
2018-08-04 08:24:49 +10:00
Andrew Tridgell
64c8ca514c
HAL_ChibiOS: fixed attach_interrupt check
...
we can't have two handlers on the same pad
2018-08-03 13:44:59 +10:00
Andrew Tridgell
4e6ac85057
HAL_ChibiOS: use 32 bit time intervals
...
this makes for smaller and faster code. We really don't need 64 bit
intervals as long sleeps are done with a loop.
2018-08-03 13:44:59 +10:00
Andrew Tridgell
1bd0ea079b
HAL_ChibiOS: fixed build on older compilers
...
allow build with gcc 4.9.x
2018-08-03 13:44:59 +10:00
Andrew Tridgell
7aba99e229
HAL_ChibiOS: fixes for ChibiOS version update
2018-08-03 13:44:59 +10:00
Andrew Tridgell
f8e2edbc7f
HAL_ChibiOS: fixed cache flush for updated ChibiOS version
2018-08-03 13:44:59 +10:00
Siddharth Purohit
2604b00b43
HAL_ChibiOS: use ch.h header for oslib api
2018-08-03 13:44:59 +10:00
Siddharth Purohit
ff65487ab3
HAL_ChibiOS: follow updated gpio pin setup procedure
2018-08-03 13:44:59 +10:00
Siddharth Purohit
5f88163e17
HAL_ChibiOS: update configuration and rtlib headers for ChibiOS 18.x.x
2018-08-03 13:44:59 +10:00
Siddharth Purohit
395c48933c
HAL_ChibiOS: move tto using updated time conversion API
2018-08-03 13:44:59 +10:00
Siddharth Purohit
4e8d072d6d
HAL_ChibiOS: move to using recent pal driver api for GPIO IRQ events
2018-08-03 13:44:59 +10:00
Mark Whitehorn
86b7adf68f
AP_HAL_Chibios: fix fmuv3/hwdef.dat printf/STDOUT description and clean up
2018-08-03 13:08:37 +10:00
Lucas De Marchi
20778f73f1
AP_HAL_ChibiOS: define HAL_HAVE_SAFETY_SWITCH accordingly
2018-08-02 13:15:02 -07:00
Andrew Tridgell
13f96bcb00
HAL_ChibiOS: fixed an i2c dma callback bug
...
many thanks to Kelly-Foster for chasing me on this one!
2018-08-02 12:29:02 +10:00
Andrew Tridgell
b0badf8caf
HAL_ChibiOS: fixes for F745 builds
2018-08-02 11:56:33 +10:00
Andrew Tridgell
44fd85ff29
HAL_ChibiOS: reduce memory used by serial buffers
...
this does not appear to affect log download speed. It saves about 27k
of memory
2018-08-01 13:11:16 +10:00
Hwurzburg
19f44f80ad
HAL_ChibiOS: Added Omnibus F4 NanoV6 (only V6)
...
bench tested all ports
2018-07-30 19:32:29 +10:00
Andrew Tridgell
4026b9f49d
HAL_ChibiOS: probe all external compasses on mini-pix
2018-07-30 17:26:19 +10:00
Andrew Tridgell
c83567dcba
HAL_ChibiOS: added duration to toneAlarm_set_buzzer_tone
2018-07-30 14:02:12 +10:00
Jonathan Challinger
f5f6220283
AP_HAL_ChibiOS: reflect changes to AP_HAL tonealarm interface
2018-07-30 14:02:12 +10:00
Andrew Tridgell
72ee20c590
HAL_ChibiOS: added RC input for OMNIBUSF7V2
2018-07-30 10:45:55 +10:00
Timothy Knab
d4c19ebc3c
HAL_ChibiOS: Updated OMNIBUSF7V2
...
Compasses on the I2C bus are now detected properly and GPS on UART3 works.
2018-07-30 10:45:55 +10:00
Andrew Tridgell
95aaa01014
HAL_ChibiOS: override COMPASS_AUTO_ROT on several boards
2018-07-28 18:05:12 +10:00
Andrew Tridgell
1eef29e525
HAL_ChibiOS: only set freq on valid IO channels
2018-07-28 15:25:57 +10:00
Andrew Tridgell
2174c53eb6
HAL_ChibiOS: added Pixhawk1 build target
...
this is more obvious to users than fmuv3
2018-07-27 10:02:31 +10:00
Alexander Malishev
1377943eb3
HAL_ChibiOS: fix DTCM size in stm32f745 mcu
2018-07-26 17:52:37 +10:00
Andrew Tridgell
8a26ca1ddf
HAL_ChibiOS: added a DMA reserve heap
...
this ensures we keep some DMA-capable memory aside for when it is
needed
2018-07-20 15:48:21 +10:00
Siddharth Purohit
f9ab7e54d4
HAL_ChibiOS: increase sigread buffer size for protocols with longer length
2018-07-20 15:47:18 +10:00
Andrew Tridgell
73cfd40e7f
HAL_ChibiOS: reduce latency of DMA sharing
...
if we are sharing a DMA channel between i2c and SPI then this saves
latency on SPI by giving up the DMA channel between retries
2018-07-20 14:51:18 +10:00
Andrew Tridgell
4244daeb2d
HAL_ChibiOS: support playing tunes by string
2018-07-20 14:37:16 +10:00
Andrew Tridgell
ec97e7772d
HAL_ChibiOS: rename f4by-ch to F4BY
2018-07-18 21:24:11 +10:00
Alexander Malishev
f265d7e128
AP_Bootloader: add f4by bootloader
2018-07-18 21:10:39 +10:00
Andrew Tridgell
caa553e727
HAL_ChibiOS: fixed internal i2c mask for Pixracer
2018-07-18 12:04:01 +10:00
Andrew Tridgell
59aab9987e
HAL_ChibiOS: account for I2C base in compass masks
2018-07-18 12:04:01 +10:00
Alexander Malishev
4342dae065
HAL_ChibiOS: define BOARD_RSSI_ANA_PIN to simpify tuning
2018-07-16 08:29:49 +10:00
Alexander Malishev
e04f438ce3
HAL_ChibiOS: fix analog pins on MatekF405
2018-07-16 08:29:49 +10:00
Alexander Malishev
89f7d652e0
HAL_ChibiOS: removed wrong led pin
2018-07-16 08:29:49 +10:00
Andrew Tridgell
9ab55f6838
HAL_ChibiOS: probe for external compasses on several boards
...
boards that have no internal compass will now probe for all external
compass types
2018-07-14 17:51:50 +10:00
Andrew Tridgell
476bddd9a3
HAL_ChibiOS: use HAL_I2C_INTERNAL_MASK
2018-07-14 17:51:50 +10:00
Andrew Tridgell
7eabee04a3
HAL_ChibiOS: enable OSD on KakuteF7
2018-07-13 14:53:53 +10:00
Andrew Tridgell
b96f24c80e
HAL_ChibiOS: added KakuteF7
...
thanks to Huibean for the fixes!
2018-07-13 14:53:53 +10:00
Andrew Tridgell
f2d602690e
HAL_ChibiOS: fixed build error with some compilers
2018-07-13 08:50:46 +10:00
Andrew Tridgell
83f38d536e
HAL_ChibiOS: fixed flow control auto-detect without DMA
...
this fixes automatic flow control detection when we are not using DMA
for TX
2018-07-13 07:34:30 +10:00
Andrew Tridgell
0201893f7c
HAL_ChibiOS: fixed peripheral power-up on fmuv5
...
we need to do the powerup before we initialise the UARTs
2018-07-13 07:34:30 +10:00
Andrew Tridgell
409e857f6b
HAL_ChibiOS: use pullup on CTS line
...
this makes life less difficult for SiK radios which go into bootloader
mode on low CTS
2018-07-13 07:34:30 +10:00
Andrew Tridgell
11e09a846c
HAL_ChibiOS: setup RTS pins as pullup
...
this prevents RTS pins from keeping SiK radios in bootloader mode on
peripheral powerup
2018-07-13 07:34:30 +10:00
Andrew Tridgell
63a0a4979c
HAL_ChibiOS: delay peripheral power on for fmuv5
...
this should prevent SiK radios staying in the bootloader
2018-07-13 07:34:30 +10:00
Michael du Breuil
6fba374069
AP_HAL_ChibiOS: Remove GPIO::analogPinToDigitalPin()
2018-07-11 23:09:52 -07:00
Andrew Tridgell
f083b80700
HAL_ChibiOS: added preallocation of DMA bouncebuffers
...
we need 512 bytes for microSD
2018-07-12 14:34:04 +10:00
Andrew Tridgell
e193a161f2
HAL_ChibiOS: enable SDIOv1 bouncebuffers
2018-07-12 14:34:04 +10:00
Andrew Tridgell
f84424cca4
HAL_ChibiOS: added specific builds for the Pixracer and mRoX21 boards
2018-07-12 12:33:32 +10:00
Andrew Tridgell
721f5d86b1
HAL_ChibiOS: fixed mRoX21 IMU setup
2018-07-12 12:33:32 +10:00
Andrew Tridgell
0310bd468c
HAL_ChibiOS: changed uart order for KakuteF4
...
thanks to feedback from Arther
2018-07-12 11:50:10 +10:00
Andrew Tridgell
50f7e55f0b
HAL_ChibiOS: don't clear buffers if no baudrate change
2018-07-12 11:41:31 +10:00
fnoop
374c46bd57
HAL_ChibiOS: MatekF405-Wing UART reorder
2018-07-11 16:26:04 -07:00
Andrew Tridgell
1f2c24ef7b
HAL_ChibiOS: backup storage to microSD if possible
...
very useful for diagnostics.
This also fixes a bug on boards with flash storage, to not switch to
microSD storage if flash storage available
2018-07-11 16:38:03 +10:00
fnoop
922a9762df
HAL_ChibiOS: Fix MatekF405-Wing default compass rotation
2018-07-11 10:10:34 +10:00
Andrew Tridgell
2d8dbc05d0
HAL_ChibiOS: fixed omnibusf4pro I2C
...
many thanks to Kelly-Foster and @sh83
2018-07-11 08:33:49 +10:00
Andrew Tridgell
fff4b3b4a0
HAL_ChibiOS: fixed build on some F4 boards
2018-07-11 07:24:39 +10:00
Andrew Tridgell
ece10082e2
HAL_ChibiOS: added separate builds for Pixhawk4 and CUAVv5
...
this makes it easier to distinguish boards in logs, plus makes life
easier when the user is selecting the right firmware.
It also gives us the flexibility to make parameter changes as needed
2018-07-10 18:29:14 +10:00
Andrew Tridgell
b647dde28f
HAL_ChibiOS: changed which I2C bus is internal on fmuv5
...
match PH4 arrangement
2018-07-10 18:29:14 +10:00
Andrew Tridgell
385713abdd
HAL_ChibiOS: support for PH4-mini board
2018-07-10 18:29:14 +10:00