Commit Graph

26 Commits

Author SHA1 Message Date
Mathieu OTHACEHE 152edf7189 Global: remove mode line from headers
Using a global .dir-locals.el file is a better alternative than
reincluding the same emacs header in every file of the project.
2016-10-24 09:42:01 -02:00
Randy Mackay 5894a54a16 Copter: althold uses current alt target if active
Previously we always reset the altitude target to the current altitude but this causes a jump if the vehicle is already in an alt-hold flight mode but has an altitude error
2016-10-15 11:29:10 +09:00
Randy Mackay c3d71f733c Copter: remove get_takeoff_trigger_throttle
get_pilot_desired_climbrate can be used instead.
2016-08-05 12:40:37 +09:00
Randy Mackay cb5d3238cb Copter: poshold provides throttle feedback from mid-stick when landed 2016-08-05 12:40:37 +09:00
Randy Mackay 5061b29031 Copter: poshold - fix call to relax_alt_hold_controller 2016-08-05 12:40:37 +09:00
mirkix e3934fac80 ArduCopter: Delete (wrong) filename out of header 2016-07-25 17:13:41 -03:00
Leonard Hall 7d54c268f6 Copter: consolidate input_euler_angle calls to use smoothing gain
Previously we had _smooth and non-smooth methods in the attitude
controller but as part of the move to quaternions these have been replaced
by a single call which always takes a smoothing gain
2016-06-24 17:17:17 +09:00
Leonard Hall e9d8a28ec0 Copter: AP_Motor's throttle_hover replaces throttle_average 2016-06-18 11:55:49 +09:00
Randy Mackay 949d5f7109 Copter: add rangefinder_alt_ok
Reduces some duplicate code,no functional change.
2016-05-21 10:36:53 +09:00
Randy Mackay 7689315ba2 Copter: rename sonar to rangefinder 2016-05-21 10:36:53 +09:00
skyscraper 6f200fa923 ArduCopter: Fix up after refactoring RC_Channel class
Further to refactor of RC_Channel class which included
adding get_xx set_xx methods, change reads and writes to the public members
to calls to  get and set functionsss

old public member(int16_t)   get function -> int16_t     set function (int16_t)
(expression where c is an object of type RC_Channel)
c.radio_in                     c.get_radio_in()           c.set_radio_in(v)
c.control_in                   c.get_control_in()         c.set_control_in(v)
c.servo_out                    c.get_servo_out()          c.set_servo_out(v)
c.pwm_out                      c.get_pwm_out()            // use existing
c.radio_out                    c.get_radio_out()          c.set_radio_out(v)
c.radio_max                    c.get_radio_max()          c.set_radio_max(v)
c.radio_min                    c.get_radio_min()          c.set_radio_min(v)
c.radio_trim                   c.get_radio_trim()         c.set_radio_trim(v);

c.min_max_configured() // return true if min and max are configured

Because data members of RC_Channels are now private and so cannot be written directly
 some overloads are provided in the Plane classes to provide the old functionality

new overload Plane::stick_mix_channel(RC_Channel *channel)
which forwards to the previously existing
void stick_mix_channel(RC_Channel *channel, int16_t &servo_out);

new overload Plane::channel_output_mixer(Rc_Channel* , RC_Channel*)const
which forwards to
(uint8_t mixing_type, int16_t & chan1, int16_t & chan2)const;

Rename functions

 RC_Channel_aux::set_radio_trim(Aux_servo_function_t function)
    to RC_Channel_aux::set_trim_to_radio_in_for(Aux_servo_function_t function)

 RC_Channel_aux::set_servo_out(Aux_servo_function_t function, int16_t value)
    to RC_Channel_aux::set_servo_out_for(Aux_servo_function_t function, int16_t value)

 Rationale:

        RC_Channel is a complicated class, which combines
        several functionalities dealing with stick inputs
        in pwm and logical units, logical and actual actuator
        outputs, unit conversion etc, etc
        The intent of this PR is to clarify existing use of
        the class. At the basic level it should now be possible
        to grep all places where private variable is set by
        searching for the set_xx function.

        (The wider purpose is to provide a more generic and
        logically simpler method of output mixing. This is a small step)
2016-05-10 16:21:16 +10:00
Randy Mackay 965f3827b4 Copter: poshold uses AP_Motors set_desired_spool_state 2016-04-01 11:59:30 +09:00
Leonard Hall 7366bc8a56 Copter: pos_hold uses 0 to 1 throttle and sets motor spool state 2016-04-01 11:59:30 +09:00
dgrat 5148e41c1a AP_Math: Cleaned macro definitions
Moved Definitions into a separate header. Replaced PI with M_PI and
removed the M_PI_*_F macros.
2016-02-27 02:51:33 -03:00
Jonathan Challinger dfab21171b Copter: call renamed functions in AC_AttitudeControl 2015-12-09 19:58:37 +09:00
Jonathan Challinger 9d8b0f3d58 Copter: call renamed functions in AC_AttitudeControl 2015-12-09 19:58:30 +09:00
Lucas De Marchi 2591261af6 Global: rename min and max macros to uppercase
The problem with using min() and max() is that they conflict with some
C++ headers. Name the macros in uppercase instead. We may go case by
case later converting them to be typesafe.

Changes generated with:

	git ls-files '*.cpp' '*.h' -z | xargs -0 sed -i 's/\([^_[:alnum:]]\)max(/\1MAX(/g'
	git ls-files '*.cpp' '*.h' -z | xargs -0 sed -i 's/\([^_[:alnum:]]\)min(/\1MIN(/g'
2015-12-01 16:28:09 -02:00
Randy Mackay 50e3c2ce3a Copter: minor comment updates
No functional change
2015-11-18 22:12:44 +09:00
bugobliterator 945bdee452 Copter: PILOT_VELZ_MAX and PILOT_ACCEL_Z take effect immediately 2015-11-18 22:12:41 +09:00
Leonard Hall 411e75b917 Copter: feed forward only used for AltHold, Loiter, PosHold
land modes use non-feedforward alt hold
2015-10-28 20:21:54 +09:00
Leonard Hall 543f6fdcd4 Copter: AltHold limits lean angle to maintain altitude
get_pilot_desired_lean_angles function now takes angle max parameter but
all flight modes except AltHold simply pass in the ANGLE_MAX parameter
meaning no functional change for them
2015-09-07 15:10:12 +09:00
Randy Mackay 82ad454864 Copter: log sonar_alt even when disabled 2015-06-17 12:46:55 +10:00
Randy Mackay 362a43c126 Copter: explicitly set alt_target_from_climb_rate parameter 2015-06-05 15:11:30 +09:00
Jonathan Challinger fb82ac3eb3 Copter: rework land detector logic 2015-05-30 18:51:55 +09:00
Andrew Tridgell 278883c521 Copter: finished conversion to .cpp files
Pair-Programmed-With: Randy Mackay <rmackay9@yahoo.com>
2015-05-30 15:21:19 +09:00
Andrew Tridgell 356ece3402 Copter: rename .pde files to .cpp files 2015-05-30 15:21:15 +09:00