Andrew Tridgell
2a81792b41
Plane: don't disable compass on one bad reading
...
the compass can go back for a short time and recover
found by Michael
2017-11-28 09:02:24 +11:00
Michael du Breuil
9720fcb8cc
Plane: Only update home when not armed, rather then not soft armed
...
Plane supports being armed, in takeoff logic and not spinning the motor
until the moment the safety button has been pressed. Unfortunately
because the safety button is required to be pressed for soft arming this
results in the plane updating home position while the user moves the
vehicle or is holding it to throw the vehicle which will can result in
several meters of altitude error from where the user expected home to
be.
Because the normal approach to plane is to have activated the safety
button before arming the aircraft this is not expected to be a behaviour
change for most users, but an improvement for people who use the button
to initiate a takeoff.
2017-11-21 11:45:15 +11:00
Michael du Breuil
767018b1d4
Plane: Support unlocking cruise heading with rudder
2017-11-09 09:39:44 +11:00
Tom Pittenger
8029a7f10e
Plane: add Tom Pittenger to developers list
...
Plane: add Tom Pittenger to developers list. He was added to main Plane.h as "Lead Developer" here *https://github.com/ArduPilot/ardupilot/blob/master/ArduPlane/Plane.h#L2 ) but never to the main ArduPilot.c file.
2017-11-06 13:46:32 +01:00
Andrew Tridgell
9c8cd6c1cc
Plane: added Q_TRANS_DECEL
...
this gives a deceleration rate for QRTL transition from RTL, and also
for transitions to QLOITER
2017-11-05 20:44:42 +11:00
Michael du Breuil
d52f5155f0
Plane: Rename rc failsafe state members
2017-11-02 16:46:08 -07:00
Andrew Tridgell
1085069851
Plane: use WP_LOITER_RAD if RTL_RADIUS is 0 for QRTL
2017-10-30 16:52:19 +11:00
Andrew Tridgell
aa430a6e2c
Plane: use RTL_RADIUS for QRTL threshold
...
when Q_RTL_MODE=1 in a quadplane use RTL_RADIUS as the distance to
switch to QRTL mode. We navigate to the destination using direct
waypoint navigation instead of using a loiter circle.
2017-10-30 16:30:38 +11:00
Peter Barker
d49be616da
Plane: call ins's periodic function
2017-10-27 16:33:45 +11:00
Tom Pittenger
8adacfeea3
Plane: always log MODE and include reason when logging is enabled
2017-10-25 21:18:29 +11:00
Lucas De Marchi
44ffb67837
ArduPlane: use FALLTHROUGH define
...
When falling through on a case switch, allow to add an empty statement
with the correct attribute to tell the compiler this behavior is
intended.
2017-08-22 23:59:13 -07:00
Peter Barker
1a665280e9
Plane: remove CLI
2017-08-14 10:23:50 +09:00
Peter Barker
2fb46a67dd
Plane: camera is responsible for taking distance-based-images and logging
2017-07-28 14:27:53 +01:00
Michael du Breuil
f87a69dcf2
Plane: Throttle based landing aborts should ask the landing library
...
Throttle based aborts should be requesting a go around from AP_Landing.
This was missed in the initial port.
2017-07-17 08:43:50 -07:00
Peter Barker
c058fba5ac
Plane: eliminate GCS_MAVLINK::send_statustext_all
2017-07-11 23:53:53 +01:00
Peter Barker
3b0a7703c4
Plane: eliminate gcs_send_message wrapper
2017-07-11 23:45:16 +01:00
Peter Barker
5a8f01c19c
Plane: use send_text method on the GCS singleton
2017-07-09 17:17:29 -04:00
Peter Barker
949e07c7e3
Plane: use DataFlash should_log to determine raw IMU logging
2017-06-29 15:26:27 +01:00
Mark Whitehorn
6607dafc66
ArduPlane: change is_tailsitter() to tailsitter_active()
2017-06-07 20:21:49 +10:00
Mark Whitehorn
53b82d1d4d
ArduPlane: add comments on tailsitter pitch limits
2017-06-07 20:21:49 +10:00
Mark Whitehorn
65755454e0
ArduPlane: set tailsitter VTOL pitch limits using only Q_ANGLE_MAX
2017-06-07 20:21:49 +10:00
Michael du Breuil
92d505598b
ArduPlane: Poll AP_Landing for fly forward information
2017-05-15 14:50:29 -07:00
Peter Barker
378015691b
Plane: stop appending lf to PERF message
2017-05-01 16:21:55 +01:00
Andrew Tridgell
351304ebcb
Plane: don't set fly-forward when transitioning
...
when quad motors are providing assistance don't see the fly-forward
flag in the AHRS. This will lower the chance of EKF yaw confusion
2017-05-01 14:27:45 +10:00
Andrew Tridgell
954905e0eb
Plane: allow battery failsafe with usb connected
...
some people connect USB to allow connections from a companion
computer. The arming check is sufficient to prevent unwanted battery
failsafes when bench testing
2017-04-28 16:33:49 +10:00
Andrew Tridgell
516bf26719
Plane: fixed QRTL change when coming from loiter
...
the nav controller can think we have already reached the loiter target
if we were last in a LOITER when we switch to RTL. In that case it
would switch to QRTL immediately
found by Leonard (thanks!)
2017-04-24 16:28:59 +10:00
Eugene Shamaev
ca84ab36be
Plane: AOA and SSA estimations are added to parameters and data logs
2017-04-19 20:48:42 +10:00
Andrew Tridgell
17ba8b3304
Plane: raise logging rate for PID and servos
2017-04-09 16:45:19 +10:00
Andrey Kolobov
35d406aeab
Plane: added a soaring controller to Arduplane
2017-03-14 08:53:10 +11:00
Michael du Breuil
1bb806edb2
Plane: Use new landing interfaces
2017-03-02 12:38:59 +11:00
Andrew Tridgell
3bb25eb194
Plane: added Q_TAILSIT_INPUT
...
this allows the user to control tailsitters either in body frame (like
a plane) or in earth frame (like a multicopter). This is useful for
people wanting to learn to fly prop-hang on 3D planes
2017-02-26 09:20:13 +11:00
Andrew Tridgell
c787f4c56f
Plane: initial support for tailsitter transitions
2017-02-18 17:26:43 +11:00
Michael du Breuil
29b16dbafd
Plane: Refactor to request relative altitudes from AHRS
...
Removes the need for plane to do the math for finding the relative height.
Also caches the value at the same time we update current_loc, which is a
non behaviour change as that was the only time you could see a change in
the relative height propegate through the system anyways
2017-02-13 09:23:14 +11:00
Tom Pittenger
1a34221db9
Plane: remove old commented code
...
- leftover from the AP_Landing stage refactor
2017-01-26 13:45:28 -08:00
Michael du Breuil
4cf1c74c62
AP_Landing + Plane: Check for land complete before requesting disarm
2017-01-26 13:11:44 -08:00
Tom Pittenger
2ccd91d88f
AP_Landing: rename stage enum
2017-01-26 13:11:44 -08:00
Tom Pittenger
650e694eb1
Plane: move landing.reset to landing.do_land()
2017-01-26 13:11:44 -08:00
Tom Pittenger
61bc0a6206
Plane: check stage==LAND instead of landing.in_progress
2017-01-26 13:11:44 -08:00
Michael du Breuil
3e66dd10d7
Plane: Move landing stages inside AP_Landing and refactor
2017-01-26 13:11:44 -08:00
Tom Pittenger
6c0296ba13
AP_Landing: shadow copy of plane flight_stage into landing
...
.. and describe stages without using specific stage name
2017-01-26 13:11:43 -08:00
Randy Mackay
fc4741395d
Plane: notify initialised after parameters loaded
2017-01-23 15:07:21 -08:00
Andrew Tridgell
081909bf6a
Plane: removed use of pwm_to_angle()
2017-01-12 17:39:37 +11:00
Andrew Tridgell
b83f50be0f
Plane: use new SRV_Channels API
2017-01-12 17:39:37 +11:00
Tom Pittenger
063f517424
Plane, TECS, AP_Landing: rename stage LAND_ABORT to ABORT_LAND
...
this will reduce confusion when searching for FLIGHT_LAND_* and you get a bunch of takeoff related hits. It will also make more sense when the landing library fully manages the FLIGHT_LAND stage entirely because it will not mange FLIGHT_LAND_ABORT
2016-12-30 23:50:03 -08:00
Tom Pittenger
04f32b6ec6
Plane: simplify flight stage landing check to use landing.in_progress
2016-12-30 23:50:03 -08:00
Tom Pittenger
84e11fd899
Plane, AP_TECS: do not pass auto_land flag to TECS, it already knows it
2016-12-30 23:50:03 -08:00
Tom Pittenger
c286ceba43
Plane: move enum FlightStages to AP_Vehicle::FixedWing
2016-12-30 23:50:03 -08:00
Tom Pittenger
b7b56b94a3
Plane: convert landing.complete to landing.is_complete()
2016-12-14 04:32:30 -08:00
Tom Pittenger
4b683edac9
Plane: simplified logic where landing complete overrides the calc value
2016-12-14 04:32:30 -08:00
Tom Pittenger
83f0a8114b
Plane: use a common reset for uniform landing wipe
2016-12-14 04:32:30 -08:00