9ead82f137
IMU: fixed HIL init with callback
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2988 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-31 23:35:37 +00:00
91e101f47e
GPS: added delay hook for GPS detection
...
this allows for MAVLink to be up during GPS detection
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2987 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-31 22:34:37 +00:00
b6397c089d
IMU: added delay callback hooks to IMU initialisation
...
this allows the imu init() call to use a custom replacement for
delay(), which will allow for the processing of MAVLink packets during
IMU initialisation
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2986 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-31 22:34:25 +00:00
e81aa43f1c
OpticalFlow - add check to see if sensor has initialised correctly.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2974 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-31 04:31:36 +00:00
150f58a4bd
removed scaling on control in because it might cause rounding issues.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2969 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-30 23:48:38 +00:00
4339ebb310
Reworked the filtering algorithm based on Maxbotics recommendations to use a Mode filter
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2968 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-30 23:34:25 +00:00
e1b677a25d
Reworked the filtering algorithm based on Maxbotics recommendations to use a Mode filter
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2965 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-30 20:35:36 +00:00
61dc79f65b
Added some missing functions needed to get HIL to compile
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2964 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-30 20:34:23 +00:00
eb39d2d53a
Added ability to grab an unfiltered value from the ADC
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2963 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-30 20:33:45 +00:00
da2a1d72e2
GPS: fixed the GPS specific test programs
...
This fixes the build
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2962 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-30 08:48:17 +00:00
915a564b8f
Changed the PID derivative filter to a moving average with 4 samples. Having great luck with it and High kD when using noisy sensors.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2957 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-29 21:52:37 +00:00
6061ee4b81
HIL: fixed radio_status in setHIL() for APM_RC
...
thanks to Michael Oborne for noticing this!
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2952 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-28 12:11:25 +00:00
09256e12da
DataFlash library - changed to use standard arduino SPI library
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2928 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-19 23:00:18 +00:00
3d641a3b45
AP_OpticalFlow - fixes to position calculations (lat was reversed and would calculate position even with surface quality was very low)
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2913 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-18 21:51:27 +00:00
c79ff4f583
doubled Slew rate limiter to 2 m/s max @ 10 hz.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2912 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-18 18:18:47 +00:00
60bf2182e4
GPS-HIL: set new_data on setHIL()
...
this fixes navigation for ACM in HIL
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2909 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-18 12:42:36 +00:00
a1733ee901
Added a slew rate limit
...
reworked filter, same results, just wanted to get rid of modulus.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2900 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-17 19:05:18 +00:00
48f010f80c
compass: fixed a compiler warning
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2844 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-13 09:10:24 +00:00
a9278b6fcd
build: added EXTRAFLAGS to make rules
...
this allows you to create a local makefile like this:
include Makefile
hil:
make -f Makefile EXTRAFLAGS="-DHIL_MODE=HIL_MODE_ATTITUDE -DSERIAL3_BAUD=115200"
and then use 'make hil'
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2843 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-13 09:07:09 +00:00
b7b0212506
Cleaned up or reverse code.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2842 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-13 05:54:40 +00:00
165643c307
fixed 5843 detection code
...
we were looking for the wrong regA value
Thanks to Chris for the debugging help! (and happy birthday!)
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2828 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-09 22:27:15 +00:00
7b803a9e1a
compass: added error checking on I2C transactions
...
this adds error checking to all operations on the compass, to ensure
that we don't accept invalid data
This also fixes the calibration values for the 5883L to match the
recommended values in the spec
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2815 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-09 12:10:00 +00:00
488a2805f7
mavlink: fixed a signed/unsigned warning
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2814 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-09 12:09:50 +00:00
a16b00b5bf
Added heavily filtered Accelerometer values for experimentation.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2779 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-08 03:58:19 +00:00
5e163c6052
added ki_Yaw private variable and accessors.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2778 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-08 03:57:12 +00:00
0d31d9be10
Added a limit to the atan function to calc the heading. Just trying to avoid, bad values screwing up the DCM. - Jason
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2777 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-08 03:56:04 +00:00
4015e7f91a
Commit test - just adding an unneeded comment
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2740 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-03 19:39:55 +00:00
90b0d769f8
compass: fixed normal operation mode change for 5883L
...
We need to set the right rates after config too. Thanks to Randy for
spotting this one
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2737 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-03 12:00:45 +00:00
d46536e142
compass: fixed output rate and averaging for 5883L
...
we need to setup the right output rate, or the compass gets very laggy
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2736 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-03 08:32:58 +00:00
2605c4b4b2
AP_Compass: fixed calibration of 5883L compass
...
this fixes a compass initialisation bug where if the first value from
the compass isn't in the right range we would set bad calibration
scaling factors.
This also changes the maximum acceptable calibration values to 2000,
which is needed for the 5883 compass
pair-programmed-with: Randy Mackay
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2718 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-02 11:31:38 +00:00
c78da666ec
AP_Compass: report compass initialisation failure
...
don't just put out rubbish values
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2717 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-02 11:31:27 +00:00
d310744bfc
AP_Compass_test - added display to auto detected compass
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2716 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-01 16:26:27 +00:00
00222a2e20
temporally revert to prior version of Sonar class to narrow in on a bug.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2708 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-30 22:32:26 +00:00
8ce403cbe4
AP_Compass - added auto detect of 5843 vs 5883L to AP_Compass_HMC5843 class
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2700 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-28 16:47:53 +00:00
da7a13128a
AP_Compass - added auto detect of 5843 vs 5883L to AP_Compass_HMC5843 class
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2699 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-28 16:30:42 +00:00
418a4b3903
removed redundant FP calcs for speed up.
...
added ability to alternate normalization and drift correction. Not fully implemented, needs further testing.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2691 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-26 22:54:08 +00:00
fe16f5d7a4
IMU speedup by shorting the temp calculation. If someone bothers to temp calibrate their sensors, they'll need to edit this shortcut.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2677 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-26 06:23:22 +00:00
cd864714ea
Add a simple tool for dumping AP_Var data from an EEPROM dump.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2676 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-25 07:56:38 +00:00
56483bc322
Added debug/ upload targets to Arduino.mk
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2656 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-23 21:36:20 +00:00
a3950ca63e
Added config.mk file inclusion for global configurations settings on make based builds. See ArduPilotOne for scripts/configure to see an example. config.mk should be located in the temporary directory where the rest of the build results are placed.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2655 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-23 19:01:06 +00:00
582cc1e229
Enable map file generation.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2636 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-22 05:54:55 +00:00
8d7e7ff58e
revert gps lib to 2602
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2608 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-21 01:38:31 +00:00
26d1ec1f56
remove static declaration from idleTimeout
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2607 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-21 01:26:57 +00:00
5b9e7eff9d
clean up idleTimeout
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2606 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-21 01:20:39 +00:00
b53b749fc7
Fix initialization of idleTimeout
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2602 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-20 21:11:45 +00:00
7521ceed61
Vector3<T>() { x = y = x = 0; }
...
changed to :
Vector3<T>() { x = y = z = 0; }
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2600 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-20 16:31:31 +00:00
9c4517cfd2
update to Baro lib to remove temp filtering.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2569 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-18 05:08:48 +00:00
c5f06b99fe
silly formatting
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2566 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-16 16:43:43 +00:00
47bc8a7500
removed some initial settings
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2565 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-16 16:35:11 +00:00
ec5035d1ec
added optimization note
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2564 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-16 16:34:23 +00:00
tridge60@gmail.com
rmackay9@yahoo.com
jasonshort
deweibel@gmail.com
DrZiplok
james.goppert