Commit Graph

3699 Commits

Author SHA1 Message Date
Jason Short 29d6085bab added Force_new_altitude call for alt hold 2012-03-10 12:37:54 -08:00
Jason Short 4ba600c0c5 upped throttle manual boost to 225 2012-03-10 12:37:28 -08:00
rmackay9 afc4aceb32 ArduCopter - fixed small compile warning about unused x_iterm and y_iterm in navigation.pde 2012-03-11 01:27:58 +09:00
rmackay9 c7480f2281 ArduCopter - fix to dataflash logging of Mag heading 2012-03-11 01:27:29 +09:00
Andrew Tridgell ba8e764349 SITL: lower the noise and drift levels for general autotest usage 2012-03-10 10:34:34 +11:00
Andrew Tridgell b02ca58901 InertialSensor: fixed HIL build 2012-03-10 10:34:34 +11:00
Andrew Tridgell 44ebb20329 MAVLink: bring the v1.0 MAVLink in sync with 0.9 2012-03-10 10:34:34 +11:00
Andrew Tridgell 87c463bcc7 DCM: after some experimentation, raise the ki values a bit
this tracks the max gyro drift more accurately
2012-03-10 10:34:34 +11:00
Andrew Tridgell eff6778515 Quaternion: use gyro drift value from sensor driver 2012-03-10 10:34:34 +11:00
Andrew Tridgell 3989fe2c2c Quaternion: go back to the full update_MARG()
the separate drift controller is too erratic on yaw hold to be usable
at the moment
2012-03-10 10:34:34 +11:00
Andrew Tridgell c8189c80d4 SITL: cleanup the gyro drift calculations
use units that are more easily understood
2012-03-10 10:34:34 +11:00
Andrew Tridgell b833190abb Quaternion: make the quaternion test more generic
works with DCM too
2012-03-10 10:34:33 +11:00
Andrew Tridgell 2f9af05cfa Quaternion: update to get_gyro_drift() interface 2012-03-10 10:34:33 +11:00
Andrew Tridgell bf16b2926c Quaternion: removed some unused variables 2012-03-10 10:34:33 +11:00
Andrew Tridgell d75e883fe8 GCS: get_integrator() is now get_gyro_drift() in DCM 2012-03-10 10:34:33 +11:00
Andrew Tridgell 3b2609c441 DCM: separate out the omega_yaw_P from omega_P
this cleans up the separation of drift rates and proportional
correction from yaw source and accelerometers, allow the yaw
to run at a different rate to the accel correction
2012-03-10 10:34:33 +11:00
Andrew Tridgell bcb7196680 IMU: added get_gyro_drift_rate() interface
this just calls down to the InertialSensor layer
2012-03-10 10:34:33 +11:00
Andrew Tridgell 9296ac494d AP_InertialSensor: added a get_gyro_drift_rate() interface
this returns the expected max drift rate for the particular type of
gyro being used
2012-03-10 10:34:33 +11:00
Andrew Tridgell 882fa1818b DCM: removed the limit on linear acceleration
we get linear accelerations of more than 1g when turning corners
2012-03-10 10:34:33 +11:00
Andrew Tridgell 9a06d35772 make 'ENABLE' and 'ENABLED' mean the same things
users get this wrong far too often!
2012-03-10 10:34:33 +11:00
Andrew Tridgell 801a442ffb Quaternion: minor tuning 2012-03-10 10:34:33 +11:00
Andrew Tridgell 3344869285 DCM: minor tuning based on testing my quad 2012-03-10 10:34:33 +11:00
Andrew Tridgell dffb435aac SITL: make the yaw match the APM conventions 2012-03-10 10:34:33 +11:00
Andrew Tridgell 2673614f6d SITL: fixed the pwm output on startup 2012-03-10 10:34:33 +11:00
Andrew Tridgell 982712d58f Quaternion: code cleanups and added comments 2012-03-10 10:34:32 +11:00
Andrew Tridgell f405477875 DCM: code cleanup and added more comments 2012-03-10 10:34:32 +11:00
Andrew Tridgell 9dc08b30cd Quaternion: bumb up gyro drift limit to match DCM 2012-03-10 10:34:32 +11:00
Andrew Tridgell 828ad7625b ACM: removed the ADC filtering code 2012-03-10 10:34:32 +11:00
Andrew Tridgell f9394f8068 ADC: removed the ADC level accel smoothing
the quaternion code does a better job of handling this noise than this
filter does
2012-03-10 10:34:32 +11:00
Andrew Tridgell 8b40c44522 Quaternion: separate out drift correction from main updates 2012-03-10 10:34:32 +11:00
Andrew Tridgell 3e960f8ef9 InertionSensor: update for new Ch6() interface 2012-03-10 10:34:32 +11:00
Andrew Tridgell 919874f2a0 IMU: fixed a warning 2012-03-10 10:34:32 +11:00
Andrew Tridgell 4dff78b9c0 GPS: expose last_fix_time 2012-03-10 10:34:32 +11:00
Andrew Tridgell 6eff9107ea Compass: change last_update to be in microseconds 2012-03-10 10:34:32 +11:00
Andrew Tridgell a0a360f955 ADC: use floats for ADC averaging
this costs almost nothing and improved accel/gyro calibration
2012-03-10 10:34:32 +11:00
Andrew Tridgell 13d5839778 APM: removed quaternion special cases 2012-03-10 10:34:32 +11:00
Andrew Tridgell 371677610d APM: avoid fetching the DCM matrix twice
also no special case for quaternions
2012-03-10 10:34:32 +11:00
Andrew Tridgell 1016d3c95d ACM: removed quaternion special cases in CLI code 2012-03-10 10:34:31 +11:00
Andrew Tridgell 8393c0299b ACM: removed the DCM tuning overrides
not needed now that DCM scales with deltat
2012-03-10 10:34:31 +11:00
Andrew Tridgell 7291dfc25a ACM: removed the special case for quaternions in GCS code 2012-03-10 10:34:31 +11:00
Andrew Tridgell d6cfc51ae4 ACM: no need to fetch offsets at startup
AP_Param handles this
2012-03-10 10:34:31 +11:00
Andrew Tridgell ef771fecdc ACM: removed a lot of the special case code for quaternions 2012-03-10 10:34:31 +11:00
Andrew Tridgell 69c29d35ce ACM: change DCM loop to 100Hz
On my APM2 quad this seems to give better results
2012-03-10 10:34:31 +11:00
Andrew Tridgell 045b49c4c4 DCM: removed update_DCM_fast
this combines the functionality of the 'fast' DCM with the normal one,
and also speeds up both the yaw drift correction and the matrix update
code
2012-03-10 10:34:31 +11:00
Andrew Tridgell 321200ebbc AP_IMU: fixed led flashing in gyro cal
thanks Pat!
2012-03-10 10:34:31 +11:00
Andrew Tridgell a92fb67b70 AP_Math: expanded the math test suite 2012-03-10 10:34:31 +11:00
Andrew Tridgell 4d65cda0ea AP_Math: added quaternion->matrix and earth frame routines
this will be used for 3d acceleration
2012-03-10 10:34:31 +11:00
Andrew Tridgell 8abbbe5713 AP_Math: better way of handling safe_sqrt()
better to test the result, than predict it
2012-03-10 10:34:31 +11:00
Andrew Tridgell ccada2e9c2 SITL: avoid parent pid code on cygwin
this causes problems on windows
2012-03-10 10:34:31 +11:00
Andrew Tridgell 3666476bcb SITL: prevent nested timer interrupts 2012-03-10 10:34:31 +11:00