Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
46,924 Commits 71 Branches 509 Tags 743 MiB
Commit Graph

46924 Commits

Author SHA1 Message Date
chobits 28fbc73fb6 Copter: fix build error when landinggear disabled 2021-04-06 17:04:34 +09:00
Andy Piper b3dbc21fa7 AP_HAL_ChibiOS: KakuteF7 bdshot configuration, tested by yaapu 2021-04-06 11:33:53 +10:00
Iampete1 79a6c5d2d5 SITL: Examples: JSON: MATLAB: add legacy Simulink files for 2018b 2021-04-06 10:45:37 +10:00
Michael du Breuil bde695d11f AP_Notify: UAVCAN_RGB_LED: don't init if no UAVCAN backends 
This allows us to consider enabling UAVCAN_RGB_LED as a more general
default, as it won't consume one of our limited backend slots if UAVCAN
is not enabled.
 2021-04-06 10:45:09 +10:00
PYBrulin 240bfeb6bd AP_RangeFinder: TeraRangerI2C added case of out of range measurement 2021-04-06 10:44:13 +10:00
PYBrulin afe9573900 AP_RangeFinder: TeraRangerI2C redefining the output distance logic with OutOfRange cases 2021-04-06 10:44:13 +10:00
Andrew Tridgell c886fd7025 AP_Logger: make log file erase async 
this prevents clagging up the main loop on a big erase. With an erase
of large enough files we could trigger a disarmed watchdog.
 2021-04-06 10:40:40 +10:00
Andy Piper 721850d00a AP_HAL_ChibiOS: fix dshot150. 2021-04-06 10:24:04 +10:00
Andy Piper f6b1e15b0e AP_HAL_ChibiOS: optimize bdshot ISRs 2021-04-06 10:24:04 +10:00
Andy Piper cb3b37d181 AP_HAL_ChibiOS: ensure that non-dshot modes get regular 1Khz updates 2021-04-06 10:24:04 +10:00
Andy Piper ea3291520c AP_HAL_ChibiOS: add fast cycle calibration step 2021-04-06 10:24:04 +10:00
Andy Piper 74d4af9ac9 AP_HAL_ChibiOS: reset bdshot IC correctly 
don't allow dshot rates below 800Hz.
set pin speed to MID1 to avoid glitching
don't run receive pulses on a timer
 2021-04-06 10:24:04 +10:00
Andy Piper 477ff72214 AP_HAL_ChibiOS: allow dshot rate to be set so as to both regularize the output as well as 
allow faster rates synchronized to the loop rate
synchronize 1Khz and use Betaflight definition for prescaler
adjust dshot bitrates
don't allocate IC DMA if already allocated
cancel DMA pulses correctly
try really hard to align pulses with push() by making each dshot pulse event driven
 2021-04-06 10:24:04 +10:00
Andy Piper 9a870e4d75 SRV_Channel: add SERVO_DSHOT_RATE and propagate to rcout 2021-04-06 10:24:04 +10:00
Andy Piper 9ac8e2b705 AP_Vehicle: addlow SRV_Channels to be initialized 2021-04-06 10:24:04 +10:00
Andy Piper f29dba2ddd AP_HAL: add set_dshot_rate() 2021-04-06 10:24:04 +10:00
Peter Barker 749d4c997b AP_Vehicle: ensure reboot command ACK is written out in SITL 2021-04-06 10:21:59 +10:00
Peter Barker 5ebe505f2c AP_HAL_SITL: ensure reboot command ACK is written out in SITL 2021-04-06 10:21:59 +10:00
TunaLobster 1bda79dd72 ArduCopter: loosen motion based landing detection when WoW is present 2021-04-06 08:46:07 +09:00
TunaLobster 444b33b059 ArduCopter: add WoW to Copter landing check 2021-04-06 08:46:07 +09:00
Jacob Walser d91fd8b006 AP_Notify: add driver for LED on Blue Robotics Navigator board 2021-04-06 09:11:53 +10:00
Peter Barker 1a2b960b0d GCS_MAVLink: prune old statustexts from queue 2021-04-06 09:10:43 +10:00
Peter Barker 4027ed6070 GCS_MAVLink: make servicing statustext more efficient 
We should only need to do a single PAYLOAD_SIZE check for each mavlink
backend now.

 - stop iterating over all channels, only do instantiated mavlink
backends
 - if we don't have space for a statustext on a channel, break
immediately and don't do remaining texts
 - resposibility is now on the GCS_MAVLINK backend for sending texts
   - that's a timing change

 - only iterate over entries actually in the queue rather than maximum
queue size
   - it's likely to be the full length anyway as we don't expire things
from the queue and most setups will have full channels
 2021-04-06 09:10:43 +10:00
Peter Barker e7a9e0acb4 Copter: move brake state into a structure 2021-04-06 07:53:23 +09:00
Peter Barker c350268918 autotest: correct compilation of Replay in autotest suite 2021-04-05 16:39:36 +10:00
Rishabh 5e5ca6e02a AP_Proximity: Check for stray faces and add new param for filter cut off freq 2021-04-05 14:09:17 +09:00
Rishabh e31ea2f3ee AC_Avoid: Change parameter defaults 2021-04-05 13:43:28 +09:00
Rishabh 1dc67fb932 AP_Proximity: Change parameter defaults 2021-04-05 13:43:28 +09:00
Andrew Tridgell 45477f6063 HAL_ChibiOS: fixed default MSP port for f405-MatekGPS 2021-04-05 11:02:32 +10:00
Andrew Tridgell ca948171fe HAL_ChibiOS: fixed ADC error on revXY STM32H7 boards 
with the new ChibiOS revision we were configuring for newer revisions
of the H7, which meant that we changed the ADC config. This broke ADC
readings on revX and revY H7 MCUs.

This PR fixes it in two ways:

 1) change ChibiOS config to assume XY config chips

 2) use 16 bit ADC for H7, which means the chip rev doesn't matter,
    and also gives us 16x the resolution for ADC readinga, so we can
    read smaller voltage and current values
 2021-04-05 11:01:03 +10:00
Peter Barker ea4bbcf6ee autotest: add test for copter position reset 2021-04-05 00:02:42 +10:00
willpiper 94bdca7f6f AP_HAL_ChibiOS: tidy up beastF7 DMA channels 2021-04-04 16:51:19 +10:00
Randy Mackay ab2e429f32 Tools: Copter.fly_square descends more quickly 2021-04-03 12:07:59 +09:00
Randy Mackay f341429977 Tools: Copter.RTLSpeed gets increased speed tolerance 2021-04-03 12:07:59 +09:00
Randy Mackay c04f686ce7 Tools: extend copter NavDelay test by 80sec 
s-curves slows missions slightly
 2021-04-03 12:07:59 +09:00
Randy Mackay 224cd5a0d3 Sub: auto-yaw-correct-xtract uses target velocity instead of position error 
Co-authored-by: Leonard Hall <leonardthall@gmail.com>
 2021-04-03 12:07:59 +09:00
Randy Mackay afa59b9a60 Sub: integrate s-curves, remove spline support 2021-04-03 12:07:59 +09:00
Randy Mackay ff8b69fbad Plane: update tuning to integrate poscon changes 2021-04-03 12:07:59 +09:00
Randy Mackay 941cf6b293 Copter: integrate AC_WPNav::get_yaw_rate_cds rename 2021-04-03 12:07:59 +09:00
Randy Mackay 94d4e5912b Copter: add comments to smartRTL 2021-04-03 12:07:59 +09:00
Randy Mackay 96267553cf Copter: auto detects mission changes 2021-04-03 12:07:59 +09:00
Randy Mackay 238d102a56 Copter: auto's wp_start skips submode change on terrain failsafe 2021-04-03 12:07:59 +09:00
Leonard Hall d981de1ff4 Copter: position control PID logging 2021-04-03 12:07:59 +09:00
Leonard Hall a29e2d8920 Copter: fix references to position error 2021-04-03 12:07:59 +09:00
Randy Mackay 7c14f4de0d Copter: rtl passes speed to wpnav::init 2021-04-03 12:07:59 +09:00
Randy Mackay 9d91b6c3be Copter: smart-rtl fix for final point altitude 2021-04-03 12:07:59 +09:00
Leonard Hall 328c0655e3 Copter: support for SCurves and position controller changes 
wp_start provides next_dest_loc
send next_destination to wp_nav instead of setting fast_waypoint
fixup zigzag for S-curve changes
fixup guided
auto spline fixes
smart rtl rename of next_point to dest_NED
loc_from_cmd accepts default location
auto mode stops before starting land command
auto do_next_wp accepts default location
rename do_next_wp to set_next_wp
also rename get_spline_from_cmd argument
also improve failure to set next waypoint due to missing terrain data
also fixup comment in set_next_wp
also auto stops when moving from straight to spline segments
also auto mode spline fix
also auto mode calls AC_WPNav::set_spline_destination_next

Copter: AutoYaw provides rate from WPNav
 2021-04-03 12:07:59 +09:00
Randy Mackay 204c839ae0 Copter: mode_smart_rtl uses peek_point 2021-04-03 12:07:59 +09:00
Randy Mackay 193799346c AP_SmartRTL: peek_point method peeks at next point 
includes peek point takes semaphore
 2021-04-03 12:07:59 +09:00
Leonard Hall 64ae08a925 AC_Loiter: fix references to position error 2021-04-03 12:07:59 +09:00