Mirror/ardupilot
5
0
Fork 0
mirror of https://github.com/ArduPilot/ardupilot synced 2025-01-05 15:38:29 -04:00
Code Issues Packages Projects Releases Wiki Activity
11,897 Commits 71 Branches 510 Tags 763 MiB
28846c6c99
Commit Graph

5182 Commits

Author SHA1 Message Date
Randy Mackay
28846c6c99 GCS_MAVLink: add DO_MOTOR_TEST message 2014-04-29 11:23:04 +09:00
Andrew Tridgell
818e500509 AP_Mission: improve the AP_Mission docs 
DisplayName isn't a description
 2014-04-29 11:46:06 +10:00
Andrew Chapman
782fbe1ec5 AP_Mission: added reset() function 2014-04-29 11:46:06 +10:00
Andrew Chapman
a80e72ff82 AP_Mission: added MIS_AUTORESTART parameter 
- added MIS_AUTORESTART parameter, defaults to 0
- added start_or_resume() function to either start or resume a mission
based on that parameter value
 2014-04-29 11:46:06 +10:00
Andrew Tridgell
cf9b67d8fc GCS_MAVLink: prevent uninitialised bytes being written to a serial port 2014-04-27 15:34:30 +10:00
Randy Mackay
e855cfec02 AC_Fence: add 10sec manual recovery 
This resolves issue #461 by giving the pilot a minimum of 10 seconds to
attempt to manually recover before the autopilot will attempt to retake
control to bring the copter home or land.
 2014-04-27 11:11:07 +09:00
Randy Mackay
db51d37071 AC_WPNav: add clear_pilot_desired_acceleration 
This allows quickly clearing out the pilot desired acceleration for
loiter contoller.
 2014-04-25 14:45:14 +09:00
Randy Mackay
06bef6e3b8 Parachute: clear release time when enabled 
This resolves an issue in which the parachute could be suddenly released
when the user enabled the parachute.  The sequence that could have
caused this bad behaviour were (1) the parachute is triggered (2) the
user disables the parachute in the 0.5sec between the trigger and the
actual release, (3) the user re-enables the parachute and the old
release time from (1) is used.
 2014-04-24 19:22:11 +09:00
Randy Mackay
ad99918fee AC_WPNav: recalc leash lengths if set_horizontal_velocity is called 
Resolves bug in which do-set-speed allowed reducing the speed during the
mission but not increasing it.
Slow down distance is also recalculated.
Unnecessary call to calc_wp_leash_length removed from
set_spline_origin_and_destination.
 2014-04-24 13:16:08 +09:00
Randy Mackay
46fba47c8e AC_WPNav: slow target point's speed near destination 2014-04-24 13:16:00 +09:00
priseborough
ecc8e45eda AP_NavEKF: Fix bug in position reset logic 2014-04-23 18:16:02 +10:00
Andrew Tridgell
b0fd94f18e AP_GPS: initialise a variable in uBlox driver 2014-04-23 18:15:53 +10:00
Randy Mackay
7c02a02bd8 AC_WPNav: reset_I flag moved to position controller 2014-04-23 15:00:14 +09:00
Randy Mackay
098f8169b0 AC_PosControl: add keep_xy_I_terms method 
Stops horizontal PID's I terms from being reset when the controller is
next updated
 2014-04-23 15:00:12 +09:00
Randy Mackay
4d5b73b968 AC_WPNav: add reset_I to set_loiter_target 2014-04-23 15:00:07 +09:00
Ju1ien
6c71569775 AC_PosControl: update_xy_controller allows not resetting I term 2014-04-23 14:59:49 +09:00
Ju1ien
5d0476e522 AC_WPNav: add reset_I to init_loiter_target 2014-04-23 14:59:47 +09:00
Randy Mackay
09a35cf90f AC_PosControl: bugfix for freezing I-term build-up 2014-04-23 11:33:53 +09:00
Randy Mackay
559a258ede AC_WPNav: bug fix to limit target point from moving beyond leash 
Also pull Z-axis acceleration from position controller instead of using
#define
 2014-04-22 23:05:11 +09:00
Randy Mackay
9c6995d8bb AC_PosControl: add get_accel_z method 2014-04-22 23:05:08 +09:00
Randy Mackay
e565ee6d33 AC_PosControl: stop I term build-up when motors at max 2014-04-22 23:05:06 +09:00
Andrew Tridgell
e10542dcae AP_Mission: added get_current_nav_index() function 
this will return 0 when there is no current command, which is what is
expected in MAVLink when there is no mission

(it prevents the text to speech announcing "65 thousand 6 hundred and
thirty five", which is quite annoying!)
 2014-04-22 11:40:18 +10:00
Michael Day
96173bfb8a AP_Rally: Added one getter method and made a utility method public. 2014-04-22 11:40:18 +10:00
Randy Mackay
0e065e4894 AP_InertialNav: get_velocity_xy const 2014-04-21 21:59:38 +09:00
Randy Mackay
6f6c9e2585 AC_PosControl: bug fix to vertical speed limit 
Vehicle was not reaching target climb or descent rate because of
incorrectly defaulted acceleration
 2014-04-21 21:36:02 +09:00
Andrew Tridgell
25667a11a0 AP_NavEKF: use AHRS vehicle class for sideslip calculation 
Pair-Programmed-With: Paul Riseborough <p_riseborough@live.com.au>
 2014-04-21 18:13:12 +10:00
Andrew Tridgell
5acd17b843 AP_NavEKF: cleanup some build warnings 
Pair-Programmed-With: Paul Riseborough <p_riseborough@live.com.au>
 2014-04-21 18:13:12 +10:00
Andrew Tridgell
c8c6e05a4a AP_AHRS: added vehicle class to AHRS 
used by EKF to control use of get_fly_forward()
 2014-04-21 18:13:12 +10:00
priseborough
bd28cdbdcf AP_NavEKF: Improved magnetometer consistency checks 
A magnetometer axis that fails the innovation consistency check will cause
all axes not to be used. If this condition continues for 10 seconds, a
magnetometer timeout condition will be declared. When the timeout has
occurred, if it is not a fly forward vehicle, then individual channels
will be used again, but with a reduced weighting.
 2014-04-21 16:31:31 +10:00
Randy Mackay
648787a6c8 AC_WPNav: rename some definitions 2014-04-21 15:06:29 +09:00
Randy Mackay
2167dd7d3e AC_WPNav: update target speed immediately 2014-04-21 14:51:26 +09:00
Andrew Tridgell
05bffb5915 HAL_SITL: enable use of SIM_FLOAT_EXCEPT parameter 2014-04-21 15:37:08 +10:00
Andrew Tridgell
e0db7b117f SITL: added SIM_FLOAT_EXCEPT parameter 
this enables checking for floating point exceptions
 2014-04-21 15:37:08 +10:00
Andrew Tridgell
610a930612 AP_NavEKF: catch covarience errors and reset filter 
this catches covariance values beyond a reasonable limit and resets
the filter is they happen
 2014-04-21 15:37:08 +10:00
Andrew Tridgell
7e5a491f14 AP_Math: prevent a floating point exception 2014-04-21 15:37:08 +10:00
Andrew Tridgell
4d24a86088 AP_AHRS: prevent a infinity value 2014-04-21 15:37:07 +10:00
Randy Mackay
d382fa51ee AC_WPNav: run loiter and wp nav at 50hz on Pixhawk 2014-04-21 13:32:02 +09:00
Randy Mackay
72d2712c4e AC_WPNav: integrate update_xy_controller name change 2014-04-21 13:31:58 +09:00
Randy Mackay
966340a02a Circle: integrate update_xy_controller name change 2014-04-21 13:31:57 +09:00
Randy Mackay
7e376bc517 PosControl: update_pos_controller renamed to update_xy_controller 2014-04-21 13:31:55 +09:00
Andrew Tridgell
4756dbee84 AP_NavEKF: fixed millisecond subtraction for rollover 
Pair-Programmed-With: Paul Riseborough <p_riseborough@live.com.au>
 2014-04-21 13:16:20 +10:00
Andrew Tridgell
be9d0c1c4d APM_OBC: setup termination values in PX4IO 
this sets up the PX4IO board with failsafe values in case the FMU is
not running
 2014-04-21 11:52:53 +10:00
Andrew Tridgell
0d4985079e RC_Channel: added support for LimitValue settings 
this allows you to set a channel failsafe or radio_out to a limit
value
 2014-04-21 11:52:41 +10:00
Andrew Tridgell
7f4178d967 RC_Channel: added setup_failsafe_trim_all() function 
sets all channels to output trim values on FMU failure
 2014-04-21 08:37:24 +10:00
Andrew Tridgell
5cd145a307 AP_HAL: added set_failsafe_pwm() API 
this allows the PWM values for FMU firmware failure to be setup
 2014-04-21 08:36:52 +10:00
Andrew Tridgell
7f9a9107c7 APM_Control: logging_started needs to be static 
prevents writing log headers twice
 2014-04-21 07:13:06 +10:00
Andrew Tridgell
68f1ae3036 AP_NavEKF: fixed some matlab ! -> ~ typos 
Pair-Programmed-With: Paul Riseborough <p_riseborough@live.com.au>
 2014-04-20 21:44:37 +10:00
Andrew Tridgell
5a7afbf2cd AP_GPS: prevent writing GPS log headings multiple times 2014-04-20 21:44:14 +10:00
Randy Mackay
e3ffd5c0dd Common: remove RallyLocation defintion 2014-04-19 15:00:28 +09:00
Randy Mackay
7011ab40c2 Rally: define RALLY_WP_SIZE and RallyLocation 2014-04-19 15:00:25 +09:00