Commit Graph

33378 Commits

Author SHA1 Message Date
Andy Piper f93295017a Revert "AP_HAL_ChibiOS: correct voltage sensor and current scale on speedybeef4v3"
This reverts commit 9f9be8da0f.
2023-07-24 13:16:52 +10:00
Andy Piper 9f9be8da0f AP_HAL_ChibiOS: correct voltage sensor and current scale on speedybeef4v3 2023-07-23 12:47:14 +10:00
Henry Wurzburg 3629037177 RC_Channel:clean up metadata for AUX switches 2023-07-21 11:16:47 +10:00
Peter Barker dd325a7aaf AP_HAL_ChibiOS: disable terrain unless SD card available 2023-07-19 17:25:18 +09:00
Peter Barker 5ee85b82f9 AP_Terrain: assume HAL_BOARD_TERRAIN_DIRECTORY is defined 2023-07-19 17:25:18 +09:00
Peter Barker 338a4d6b38 hwdef: remove HAL_BOARD_LOG_DIRECTORY and HAL_BOARD_TERRAIN_DIRECTORY defaults
these are now defaulted in chibios_hwdef.py
2023-07-19 17:25:18 +09:00
Peter Barker 092afa54a9 AP_HAL_ChibiOS: defaults for board log directory and terrain directory in chibios_hwdef.py 2023-07-19 17:25:18 +09:00
Peter Barker 274aedeaae GCS_MAVLink: rely on item conversion to run DO_SET_ROI_NONE when presented in COMMAND_LONG 2023-07-19 17:03:00 +09:00
Rhys Mainwaring 3bb6fb460e AP_DDS: fix reliable stream buffer size
Signed-off-by: Rhys Mainwaring <rhys.mainwaring@me.com>
2023-07-19 16:59:38 +09:00
Andy Piper 15047ddfc7 AP_RCProtocol: rescan at CRSFv3 baud rates to avoid RX loss on soft reboot 2023-07-19 16:32:36 +09:00
Andy Piper 7a6065940d AP_RCProtocol: report tracer frame rate correctly 2023-07-19 16:32:36 +09:00
Andy Piper 016448ca40 AP_HAL_ChibiOS: correct comment in HEEWING-F405 v1 2023-07-19 16:29:47 +09:00
Andy Piper c2820b2d87 AP_HAL_ChibiOS: HEEWING-F405v2 which includes dataflash logging 2023-07-19 16:29:47 +09:00
Randy Mackay ca935ef47e AP_Mount: viewpro and xacti only enabled on boards 2mb flash 2023-07-18 21:02:02 +09:00
Randy Mackay d5977b6d96 AP_Mount: viewpro calc_crc len arg fix
Also remove one unnecessary length check
Also correct length check that meant last byte of buffer was unusable
2023-07-18 21:02:02 +09:00
Randy Mackay a8bb79b9ab AP_Mount: add viewpro cpp driver 2023-07-18 21:02:02 +09:00
Randy Mackay 75de6c0398 AP_Camera: mount backend implements set_tracking 2023-07-18 21:02:02 +09:00
Randy Mackay ddb91afdde AP_Mount: add set_tracking accessor 2023-07-18 21:02:02 +09:00
Randy Mackay 471f528233 AP_Mount: Xacti integrates get-date-and-time return of ms 2023-07-18 21:02:02 +09:00
Randy Mackay b5cbefc43a AP_RTC: get-date-and-time returns milliseconds 2023-07-18 21:02:02 +09:00
Randy Mackay 4b96c2f568 AP_AHRS: comment to clarify get-velocity-NED units 2023-07-18 21:02:02 +09:00
Randy Mackay b80ea6572c AP_Scripting: viewpro driver comment fix 2023-07-18 21:02:02 +09:00
Peter Barker 0302672722 hwdef: remove bootloader flashing from MambaF405US-I2C and omnibusf4pro-bdshot
also use an include where appropriate on a pair of other boards
2023-07-18 11:40:32 +10:00
Andrew Tridgell 56be632916 HAL_ChibiOS: use set_size_best()
maximise chance of getting a reasonable uart buffer size
2023-07-18 11:38:27 +10:00
Andrew Tridgell 8a8a45dd23 AP_HAL: added set_size_best() for ByteBuffer 2023-07-18 11:38:27 +10:00
Henry Wurzburg f4503a5b7b AP_Arming:change metatdata for ARMING_REQUIRE 2023-07-18 11:35:55 +10:00
Peter Barker 8ff9fc0f70 AP_Logger: add Write_NamedValueFloat
for getting diagnostics into the code during ddebug fast
2023-07-18 11:34:31 +10:00
Iampete1 f5d6e167b5 AP_Vehicle: dynamic notch use min ratio for RPM tracking 2023-07-18 11:32:39 +10:00
Peter Barker a3f43b26ae AP_OpticalFlow: use vector rotate method 2023-07-18 11:19:57 +10:00
Peter Barker 92b7cfbbb2 AP_Beacon: MarvelMind: avoid potentially reading INT32_MAX bytes of input
constrain the number of bytes read.  Simplify the way bytes are read.

the return value from available() is unsigned...
2023-07-18 11:18:47 +10:00
Peter Barker 32659fd3b6 AP_HAL_SITL: correct return values on UARTDriver write call 2023-07-18 11:17:01 +10:00
Andy Piper 0b20328756 Filter: fix notch filter test. 2023-07-18 11:06:02 +10:00
Andrew Tridgell af491e2f2a AP_Math: define M_PI to more digits for use by code that uses DOUBLE_PRECISION_SOURCES 2023-07-18 11:06:02 +10:00
Andy Piper 5d260f1f42 AP_Mission: use fabsF where appropriate 2023-07-18 11:06:02 +10:00
Peter Barker 6e0639ea91 AP_HAL: tidy AP_Airspeed includes, use AP_AIRSPEED_ENABLED properly 2023-07-18 11:03:07 +10:00
Peter Barker c88a53b662 AP_Airspeed: tidy AP_Airspeed includes, use AP_AIRSPEED_ENABLED properly 2023-07-18 11:03:07 +10:00
Henry Wurzburg f70c1e96c7 hwdef:add bdshot to MatekF765-SE 2023-07-18 10:26:44 +10:00
Peter Barker ae8d3724cd GCS_MAVLink: convert to COMMAND_INT to handle MAV_CMD_DO_SET_HOME 2023-07-18 09:10:26 +10:00
Iampete1 49226b6dcf AP_motors: Example: Test: allow to run on heliquad 2023-07-18 08:05:26 +09:00
Iampete1 c3200b00dd AP_Motors: Example: Test: make mostly flake 8 clean 2023-07-18 08:05:26 +09:00
Iampete1 b175e7a2f9 AP_Motors: example: heli comparison: update functionality and support setting swash type 2023-07-18 08:05:26 +09:00
Iampete1 c5c26e89da AP_Motors: example: allow setting shashplate type at runtime 2023-07-18 08:05:26 +09:00
Iampete1 b327f00b25 AP_Motors: heli: move swash servo defualt and setup into swash lib 2023-07-18 08:05:26 +09:00
Iampete1 d32d1dfec8 AP_Motors: Heli: get output mask from swashplate lib 2023-07-18 08:05:26 +09:00
Iampete1 b61b761141 AP_Motors: Heli: move swashplate output state and code into swash lib 2023-07-18 08:05:26 +09:00
Iampete1 6717da708c AP_MotorsHeli: swash: combine configure and calculate_roll_pitch_collective_factors functions 2023-07-18 08:05:26 +09:00
Iampete1 83f216a386 AP_Motors: Heli: Swash: re-work roll pitch and collecive factor caculation 2023-07-18 08:05:26 +09:00
Asif Khan 0c67f20a74 AP_Mount: fix setting default mode redundantly in each backend 2023-07-15 10:46:28 +10:00
Peter Barker f288ba7cd0 AP_HAL_SITL: correct parsing of --rate on SITL commandline
it's in the help but not in the code...
2023-07-15 00:13:12 +10:00
Andy Piper 2f97a9855a AP_NavEKF3: fix docs on ABIAS_P_NSE_DEFAULT 2023-07-14 08:33:05 +09:00
Peter Barker efc7b4b6ee AP_HAL_SITL: remove race in SITL::UARTDriver::_write
txspace could change if another thread is involved
2023-07-13 18:13:42 +10:00
yaapu 4f69f9cc23 AP_OSD: added OSD_TYPE2 param to enable dual OSDs backend support
Co-authored-by:HWurzburg(hurzburg@yahoo.com)

up to 2 OSD instances can run at the same time sharing a single OSD thread

)
2023-07-13 12:39:19 +10:00
yaapu 3923dcb63e AP_Arming: added OSD_TYPE2 param to enable dual OSDs backend support
Co-authored-by:HWurzburg(hurzburg@yahoo.com)

up to 2 OSD instances can run at the same time sharing a single OSD thread
2023-07-13 12:39:19 +10:00
Andy Piper 504fdb4ca3 GCS_MAVLink: squash bitwise | operator warnings 2023-07-13 11:02:40 +10:00
Andy Piper 3224cf19a8 SITL: remove unused variables 2023-07-13 11:02:40 +10:00
Andy Piper 2e2491f4ff AP_TECS: remove unused variables 2023-07-13 11:02:40 +10:00
Andy Piper 80112051b4 AP_Proximity: initialize structures correctly 2023-07-13 11:02:40 +10:00
Andy Piper e06952bf0f AP_OSD: use message with static assert 2023-07-13 11:02:40 +10:00
Andy Piper 1b10008e38 AP_Math: use message with static assertion 2023-07-13 11:02:40 +10:00
Andy Piper d9869290ee AP_Logger: remove unused counter 2023-07-13 11:02:40 +10:00
Andy Piper d36149e1a8 AP_HAL_SITL: remove unused counter 2023-07-13 11:02:40 +10:00
Andy Piper f7f29650ba AP_Follow: remove unused variables 2023-07-13 11:02:40 +10:00
Andy Piper 74a70e52b8 AP_BattMonitor: remove unsued variables 2023-07-13 11:02:40 +10:00
Andy Piper 76e2d950d4 AP_Arming: squash bitwise & warnings 2023-07-13 11:02:40 +10:00
Andy Piper 813cf3660d AC_AutoTune: remove unsued variables 2023-07-13 11:02:40 +10:00
Andrew Tridgell 0f8d618102 AP_Scripting: added bindings for VTOL motor loss
this allows a script to take an action on loss of a VTOL motor
2023-07-13 08:03:52 +10:00
Peter Barker 36ffe42f01 RC_Channel: add and use AP_OPTICALFLOW_CALIBRATOR_ENABLED 2023-07-12 21:37:24 +10:00
Peter Barker 8416730a8c AP_OpticalFlow: add and use AP_OPTICALFLOW_CALIBRATOR_ENABLED 2023-07-12 21:37:24 +10:00
Peter Barker f14aab29e5 AP_OpticalFlow: correct compilation when HAL_LOGGING_ENABLED is 0 2023-07-12 21:37:24 +10:00
Andrew Tridgell aa0b119806 HAL_ChibiOS: disable CANFD bits if CANFD not enabled
cannot support CANFD receive on G4
2023-07-12 18:54:45 +10:00
Andrew Tridgell deab955a0f hwdef: update HolybroG4_GPS
disable CAN2 (unused), and prevent sharing of DMA for GPS UART
2023-07-12 18:54:45 +10:00
Peter Barker f3e5e28364 GCS_MAVLink: zero structured passed in to convert_COMMAND_LONG_to_COMMAND_INT 2023-07-12 18:51:07 +10:00
Peter Barker 527f3d5728 GCS_MAVLink: add infrastructure to handle command longs as command ints 2023-07-12 18:51:07 +10:00
Peter Barker ab5908cb59 hwdef: disable bootloader flashing for F35Lightning
both boards on our Wiki seem to show boot0 pins
2023-07-12 17:54:02 +10:00
Peter Barker 6b87318062 SITL: act on safety switch being enabled in SITL by zeroing outputs 2023-07-12 17:53:12 +10:00
Peter Barker 2c9551a25a AP_HAL_SITL: act on safety switch being enabled in SITL by zeroing outputs 2023-07-12 17:53:12 +10:00
Peter Barker f5a26495d3 AP_HAL: act on safety switch being enabled in SITL by zeroing outputs 2023-07-12 17:53:12 +10:00
Andrew Tridgell a6055033ab AP_SerialManager: removed set_blocking_writes_all 2023-07-12 17:06:02 +10:00
Andrew Tridgell 36528cae57 AP_RCProtocol: removed set_blocking_writes 2023-07-12 17:06:02 +10:00
Andrew Tridgell 8c6aa02b86 AP_FETtecOneWire: removed set_blocking_writes 2023-07-12 17:06:02 +10:00
Andrew Tridgell 4fc29909a4 AP_Hott_Telem: removed set_blocking_writes 2023-07-12 17:06:02 +10:00
Andrew Tridgell 22c31ac729 AP_IOMCU: removed set_blocking_writes 2023-07-12 17:06:02 +10:00
Andrew Tridgell 2d28b59661 AP_Common: removed set_blocking_writes
and moved to top level locking in UARTs
2023-07-12 17:06:02 +10:00
Andrew Tridgell 4087e0b215 AP_Camera: removed set_blocking_writes 2023-07-12 17:06:02 +10:00
Andrew Tridgell 6e952bae17 HAL_SITL: allow override of serial devices in SITL periph 2023-07-12 17:06:02 +10:00
Andrew Tridgell fca6f2cba2 HAL_SITL: fixed crash with command line args to SITL periph 2023-07-12 17:06:02 +10:00
Andrew Tridgell a3eba8bbd3 HAL_ChibiOS: enable UART monitor
enabled if GPS moving baseline available or the board flash size is
256k or over
2023-07-12 17:06:02 +10:00
Andrew Tridgell 62b2fdb8f8 GCS_MAVLink: update to new read_locked() API 2023-07-12 17:06:02 +10:00
Andrew Tridgell 25761c3a8e AP_HAL_Linux: moved UART port locking up to AP_HAL 2023-07-12 17:06:02 +10:00
Andrew Tridgell 3caf52a841 AP_HAL_ESP32: moved UART port locking up to AP_HAL 2023-07-12 17:06:02 +10:00
Andrew Tridgell 66e5ea0b1b AP_HAL_Empty: moved UART port locking up to AP_HAL 2023-07-12 17:06:02 +10:00
Andrew Tridgell aa74615ce1 AP_CANManager: moved UART port locking up to AP_HAL 2023-07-12 17:06:02 +10:00
Andrew Tridgell 8fd5341b5b HAL_ChibiOS: moved uart locking up to AP_HAL
and removed set_blocking_writes
2023-07-12 17:06:02 +10:00
Andrew Tridgell 4f81a40066 AP_HAL_SITL: moved UART port locking up to AP_HAL 2023-07-12 17:06:02 +10:00
Andrew Tridgell ceb07c3f7b AP_HAL: moved locking to AP_HAL and added monitor callback 2023-07-12 17:06:02 +10:00
HelloLeFei 8ec404c6fc AP_HAL_ChibiOS: add HEEWING-F405 flight controller
add bi-directional dshot
add back in features.
juggle DMA allocations to allow CRSF to work correctly
disable dshot on PWM 10 as it is not used
do not enable quadplane by default
do not disable arming checks
run ICM42688 at 1Mhz for low speed to avoid gyro noise
add HEEWING README and picture
2023-07-12 10:40:37 +10:00
David Buzz 0d9f0c8dd6 AP_HAL_ESP32: esp32 i2c bugfix for idf4.4 2023-07-12 08:19:34 +09:00
Randy Mackay c28e629af3 AP_Mount: Xacti fix for gnss format 2023-07-12 08:18:46 +09:00
Tom Pittenger 0b13fa2c0f AP_ADSB: correct bad 16bit port read in ADSB drivers 2023-07-12 08:05:29 +10:00
Peter Barker fbc66132e3 AP_ADSB: correct bad port read in Sagetech driver 2023-07-12 08:05:29 +10:00
Andrew Tridgell 9454b54a1d AP_Mount: prevent SIYI driver crash if serial port not setup
if MNT1_TYPE=8 and no serial protocol set to gimbal then a camera
trigger can crash the vehicle
2023-07-11 20:35:13 +09:00
Max-001 afc019e1ea EFI: added efi MavLink class 2023-07-11 12:32:19 +10:00
Peter Barker b7232b1d38 AP_RangeFinder: add missing include for I2cDevice.h
needed for the FOREACH_I2C macro
2023-07-11 10:30:02 +09:00
Peter Barker f697489ab7 AP_RangeFinder: correct use of enable defines for Lua backend 2023-07-11 10:30:02 +09:00
Peter Barker bf3bafcd17 AP_RangeFinder: move remaining feature defines into _config.h 2023-07-11 10:30:02 +09:00
muramura d5dd4151eb AP_Motors: If frame specification is FALSE, frame name is unsupported 2023-07-11 10:22:26 +09:00
Gone4Dirt d5e72a5440 AP_Motors: Fix up MotorTestSweep.sh now that frame_class is an enforced argument 2023-07-11 10:10:14 +10:00
Gone4Dirt 2563edc3c3 AP_Motors: Allow frame class to be a run-time arg to AP_Motors_test and add all heli frame classes to test
AP_Motors: Example: init each frame type correctly and warn for init fail
2023-07-11 10:10:14 +10:00
bugobliterator 1b3de3acf2 AP_HAL: add HAL_ENABLE_SENDING_STATS to enable sending stats over CAN 2023-07-10 12:56:37 +10:00
bugobliterator a0e541893c AP_DroneCAN: add support for sending CAN and Protocol Stats 2023-07-10 12:56:37 +10:00
Andrew Tridgell 7a1b7e85be HAL_ChibiOS: default AP_BOOTLOADER_ALWAYS_ERASE to 1 on AP_Periph 2023-07-10 06:52:44 +10:00
Andrew Tridgell 0accc9f897 HAL_ChibiOS: clear EOP bit at end of F4 programming 2023-07-10 06:52:44 +10:00
Andrew Tridgell 5a84e988a5 AP_CheckFirmware: fixed error code for bad firmware
when we have a bad unsigned firmware we check if it is a good signed
firmware. If it is then we should return OK, if not we should return
the original error code, otherwise we end up giving a misleading
reason for not booting a peripheral
2023-07-09 18:11:54 +10:00
Andy Piper d98666832c AP_HAL_ChibiOS: correct incorrect defaults for serial ports on FoxeerH743v1 2023-07-07 16:55:26 +10:00
Andy Piper 993da19f27 AP_SerialManager: check for incorrect usage of old HAL_SERIALx_PROTOCOL 2023-07-07 16:55:26 +10:00
Stephen Dade c73fa82d07 AP_Scripting: Add SET_MODE support for Rockblock lua script and mavlink example 2023-07-07 13:15:09 +10:00
bugobliterator a497c06e83 AP_Scripting: stash and restore FPU register context in LUAI_TRY
this fixes an issue where a lua library function triggers an exception
after it does a math operation which changes the floating point
registers on M7 MCUs (such as STM32H7). An example is math.random()
which calls math_random(), which pre-calculates a double value before
checking if the arguments to the call are valid. When it then checks
and finds invalid values the exception longjmp does not restore the
floating point registers.
2023-07-07 07:51:02 +10:00
yunjiuav 92a7d09e2e HAL_ChibiOS: added YJUAV_A6 support 2023-07-06 20:36:28 +10:00
Peter Barker 4ef85b14d0 hwdef: add hwdef for SDMODELH7V1 2023-07-06 17:35:44 +10:00
Peter Barker e26f8c1d11 AP_RangeFinder: populate AP_RangeFinder_config.h 2023-07-06 08:30:27 +10:00
Tom Pittenger 5cbb776951 AP_Arming: wrap things in P_INERTIALSENSOR_ENABLED 2023-07-05 13:51:00 -07:00
Andy Piper 1f9539a1b3 AP_BLHeli: add battery status MSP handling
give internal error if an unknown MSP command occurs
2023-07-05 15:39:15 +01:00
Randy Mackay 9c15dcb206 AR_PosControl: limit and zero velocity I-term
zero in forward-back direction
limit in lateral direction
2023-07-05 20:27:54 +09:00
Randy Mackay 6f52eaf9a7 AR_AttitudeContol: add steering_limited checks 2023-07-05 20:27:54 +09:00
Randy Mackay 46702e6c49 AP_Math: Vector2f::projected made const 2023-07-05 20:27:54 +09:00
Peter Barker daf56c5ab1 RC_Channel: add and use SetFocusResult 2023-07-05 16:28:42 +10:00
Peter Barker 485fee36ab AP_Mount: add and use SetFocusResult 2023-07-05 16:28:42 +10:00
Peter Barker 958622523f AP_Mission: add and use SetFocusResult 2023-07-05 16:28:42 +10:00
Peter Barker 82b0630c6a AP_Camera: add and use SetFocusResult 2023-07-05 16:28:42 +10:00
Mikhail Degtiarenko cc0b2ab3bb AP_HAL_ChibiOS: add SPL06 to MambaH743v4
The Diatone Mamba MK4 H743 v2 Flight Control have moved from the DPS280 barometer to using SPL06.

https://www.diatone.us/products/mamba-mk4-h743-v2-flight-control-30mm-m3l
2023-07-05 16:26:57 +10:00
Asif Khan 82b709083c AP_Camera: add CAMx_OPTION support for start/stop recording when arm/Disarm 2023-07-05 09:07:53 +10:00
Andrew Tridgell 0aab2f7974 HAL_ChibiOS: implement newlib alloc functions as malloc wrappers
this fixes issue #24106
2023-07-05 07:13:39 +10:00
Tom Pittenger e05700e10d AP_BoardConfig: add accessor for param BRD_SERIAL_NUM 2023-07-04 13:35:09 -07:00
Tom Pittenger f27ad17ea0 AP_AccellCal: initialize HAL_INS_ACCELCAL_ENABLED for periph 2023-07-04 05:41:03 -07:00
Peter Barker d0b967097e AP_HAL_ChibiOS: process @include lines within hwdef files 2023-07-04 17:36:32 +10:00
Peter Barker 53e6f289e5 AP_HAL_ChibiOS: factor out a write_processed_defaults_file method 2023-07-04 17:36:32 +10:00
Peter Barker 26359204bd AP_HAL_ChibiOS: tidy defaults.parm handling 2023-07-04 17:36:32 +10:00
Tom Pittenger ecc517360f AP_Vehicle: is_landing/is_taking_off not to req scripting 2023-07-03 22:44:00 -07:00
Tom Pittenger 461671eaf3 AP_DroneCAN: add NotifyState.landing & taking off 2023-07-03 22:44:00 -07:00
Andrew Tridgell 41fbc6124b AP_Scripting: updated VTOL quicktune docs 2023-07-04 12:24:02 +10:00
Andrew Tridgell b7b12d7220 AP_Scripting: fixed lua-check warnings in VTOL-quicktune 2023-07-04 12:24:02 +10:00
Andrew Tridgell 3aea282bdd AP_Scripting: fixed use of QUIK_ENABLE in VTOL-quicktune
this was lost when the cached access was added
2023-07-04 12:24:02 +10:00
Andrew Tridgell d8bcb41b26 AP_Scripting: added QUIK_MAX_REDUCE parameter to VTOL-quicktune.lua
this limits the amount that rate gains can reduce from the original
values in a quicktune. Large reductions in rate gains can be
incorrectly triggered by a frame resonance or gust of wind which can
result in gains that are dangerously low, which can trigger an angle P
oscillation
2023-07-04 12:24:02 +10:00
Iampete1 f55267017b AP_Motors: Heli: Remove unused init_output return and don't assume single for initialised OK 2023-07-04 11:31:21 +10:00
Andy Piper 810dfaf4f6 AP_HAL_ChibiOS: pull RTS lines low on Pixhawk6C to avoid glitches on startup 2023-07-04 11:13:26 +10:00
Andrew Tridgell 9a68b78973 AP_DroneCAN: allow BRD_SAFETY_MASK to work on CAN ESCs and servos
this allows for testing of a fwd motor or control surfaces while not
allowing for VTOL ESCs to run. This makes CAN actuators behave the
same as direct PWM actuators
2023-07-04 10:40:45 +10:00
Peter Barker c45c02ce82 AP_GPS: use AP_AHRS_ENABLED in place of HAL_BUILD_AP_PERIPH
the guard here is just against use of the singleton
2023-07-04 10:27:32 +10:00
Peter Barker 7a7e44ae3c AP_EFI: move case labels inside ifdefs 2023-07-04 10:26:26 +10:00
Peter Barker 257c684edf hwdef: update FlyingMoonF407 hwdef
changes from vendor
2023-07-04 10:25:19 +10:00
Henry Wurzburg 5df9b8abf1 AP_TECS: set FW landing speed if not set 2023-07-04 10:24:30 +10:00
Henry Wurzburg c33ef034b4 AP_Landing: set FW landing speed if not set 2023-07-04 10:24:30 +10:00
Iampete1 87b2000d5c AP_Scripting: Fixup examples for mavlink receive timestamp as uint32 2023-07-04 10:20:42 +10:00
Iampete1 ceca374f23 AP_Scripting: add MAVLink command long and ack examples 2023-07-04 10:20:42 +10:00
Iampete1 352f721626 GCS_MAVLink: allow scripting to block commands 2023-07-04 10:20:42 +10:00
Iampete1 1c5f3c708a AP_Scripting: add new mavlink binding to block commands 2023-07-04 10:20:42 +10:00
Iampete1 5cefff6455 AP_Scripting: fix docs 2023-07-04 10:20:42 +10:00
Iampete1 529fb83ce3 AP_Scripting: change mavlink to `:` access to match everything else, return timestamp as uint32 2023-07-04 10:20:42 +10:00
Peter Barker edb7a76b87 hwdef: add FlyingMoonH743 2023-07-04 10:04:55 +10:00
Martin Luessi 232fdd51da AP_HAL_ChibiOS: Added RADIX2HD 2023-07-04 09:36:10 +10:00
Peter Barker 5664c0a142 AP_GPS: check delay_ok in one place 2023-07-04 08:15:31 +10:00
muramura 9bcc26046c AP_VisualOdom: Check for driver availability first 2023-07-03 19:22:52 +10:00
Peter Barker c70778e4d4 AP_Mount: correct gimbal manager flags 2023-07-03 08:09:04 +09:00
Andrew Tridgell ded8d2a4b4 AP_Scripting: added revert_param.lua applet
This script implements a easy parameter reversion system to help with
manual in-flight tuning. It allows you to do a wide range of manual
tuning while flying and if you get in trouble (eg. an oscillation)
then you can use a switch to instantly revert all the parameter
changes to the values from startup.
2023-07-03 07:09:07 +10:00
Henry Wurzburg 670873da75 AC_WPNav: add roi circle_option metadata 2023-07-02 13:15:20 +10:00
Randy Mackay 3388e6f25d AP_Mount: remove xacti debug 2023-07-01 18:32:20 +10:00
Iampete1 2d42028db3 AP_BattMonitor: fix missing INA2xx param descriptions 2023-07-01 07:34:36 +10:00
Henry Wurzburg f71826a992 AP_Logger:correct blk rate param metadata 2023-06-30 15:13:52 +01:00
Henry Wurzburg 78e44ebf3a SRV_Channel: allow scaled passthru to go to trim on rc failsafe 2023-06-29 21:37:12 +10:00
Henry Wurzburg 5510dcc45d RC_Channel: allow scaled passthru to go to trim on rc failsafe 2023-06-29 21:37:12 +10:00
jfbblue0922 f990bb7374 AP_HAL_ChibiOS: jfb100 gets shorter EXT_WDOG_INTERVAL_MS 2023-06-29 19:30:14 +09:00
Michael du Breuil 25a118cbda AP_ADSB: Fix spam of lost transciever message at update() rate 2023-06-28 09:35:35 -07:00
Iampete1 df8aee1567 AP_Vehicle: Add FLTMODE_GCSBLOCK parameter and helper function 2023-06-28 12:56:25 +01:00
tiralonghipol c4b7bc9d8c AP_HAL_ChibiOS: add new board BlitzF745AIO 2023-06-28 17:23:19 +10:00
rishabsingh3003 4957785fef AP_HAL_STIL: add simulated nooploop tofsense rangefinder 2023-06-28 17:16:22 +10:00
rishabsingh3003 89d4ba6a5d AP_HAL: add simulated nooploop tofsense rangefinder 2023-06-28 17:16:22 +10:00
rishabsingh3003 6b8dfdfc10 SITL: Add simulated nooploop tofsense 2023-06-28 17:16:22 +10:00
rishabsingh3003 9e5b75be31 AP_RangeFinder: Add UART driver for NoopLoop rangefinder 2023-06-28 17:16:22 +10:00
Randy Mackay 3bada154e6 AP_DroneCAN: remove unused semaphore 2023-06-27 21:12:20 +10:00
Randy Mackay b975310fda AP_DroneCAN: add xacti gimbal support 2023-06-27 21:12:20 +10:00
Randy Mackay bb8319e914 AP_Mount: frontend instantiates Xacti backend 2023-06-27 21:12:20 +10:00
Randy Mackay a4f34811a0 AP_Mount: add Xacti DroneCAN backend 2023-06-27 21:12:20 +10:00
Randy Mackay 2a30bc7ce1 AP_Mount: add devid parameter and setter 2023-06-27 21:12:20 +10:00
Randy Mackay e213e7e428 AP_RTC: add get_date_and_time_utc 2023-06-27 21:12:20 +10:00
Randy Mackay cf77a564fd AP_Mount: minor comment fix 2023-06-27 21:12:20 +10:00
Randy Mackay c7b64dc448 AP_Mount: Siyi health check avoids race condition 2023-06-27 21:12:20 +10:00
Randy Mackay 5d97a4b3d6 AP_Mount: Siyi loses unused center method 2023-06-27 21:12:20 +10:00
Randy Mackay 98310d861e AP_Airspeed: minor spelling fix 2023-06-27 21:12:20 +10:00
Iampete1 9b54dee7a6 AP_BattMonitor: DroneCAN: allow battery reset if not using CAN SoC 2023-06-27 11:38:15 +10:00
Iampete1 7e94eb39ff AP_BoardConfig: fix conflicting param indexs 2023-06-27 11:27:08 +10:00
Peter Barker b6b73d674f AP_RTC: move implemenation of ap_mktime (NFC) 2023-06-27 11:25:11 +10:00
Peter Barker e659667f03 AP_Common: move implemenation of ap_mktime (NFC) 2023-06-27 11:25:11 +10:00
Peter Barker 4124c6ed3f AP_Common: move AP_RTC::mktime to be ap_mktime
in preparation for AP_RTC_ENABLED
2023-06-27 11:25:11 +10:00
Peter Barker 84e4a45dc3 AP_RTC: move AP_RTC::mktime to be ap_mktime
in preparation for AP_RTC_ENABLED
2023-06-27 11:25:11 +10:00
Peter Barker c89ec67333 AP_GPS: move AP_RTC::mktime to be ap_mktime
in preparation for AP_RTC_ENABLED
2023-06-27 11:25:11 +10:00
Peter Barker ac2fea9766 AP_Filesystem: move AP_RTC::mktime to be ap_mktime
in preparation for AP_RTC_ENABLED
2023-06-27 11:25:11 +10:00
Andy Piper 539277ba2f AP_HAL_ChibiOS: Pixhawk6X bdshot version 2023-06-27 11:22:12 +10:00
Michael du Breuil bbcc31ecec AP_RCProtocol: Refactor SUMD to remove legacy cruft
Of particular note this removes the partial SUMH support. This has been
broken as far back as 2018, as we only called add_input() if we were in
the SUMD or SUMD failsafe cases, which meant SUMH didn't work. This
commits to that path, and removes all the 8 bit CRC, SUMH support.

This also refactors a number of things for readability (condensing white
space, simplifying guards around debug code). Many of the debugs could
probably be removed, but this simplifies it.

This was tested against the RCProtocol example test, and everything
there reports a pass.
2023-06-27 10:57:06 +10:00
Peter Barker 8b13413f43 AP_Scheduler: add and use AP_SCHEDULER_EXTENDED_TASKINFO_ENABLED 2023-06-27 10:43:39 +10:00
Peter Barker 6e39565ce8 AP_HAL_ChibiOS: add and use AP_SCHEDULER_EXTENDED_TASKINFO_ENABLED 2023-06-27 10:43:39 +10:00
Peter Barker 435214852e AP_Scheduler: add and use AP_Scheduler_config.h 2023-06-27 10:43:39 +10:00