Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
29,900 Commits 70 Branches 507 Tags 662 MiB
Commit Graph

29900 Commits

Author SHA1 Message Date
Dr.-Ing. Amilcar Do Carmo Lucas 24ad9e9dff GCS_MAVLink: Adapt to upstream mavlink changes in autopilot_version message 2018-01-11 09:52:13 +11:00
Tom Pittenger 36f06d3576 AP_InertialSensor: remove AP_InertialSensor_UserInteract 
leftover dead code from when CLI was removed
 2018-01-11 08:11:07 +11:00
Peter Barker 8d7c710e9b GCS_MAVLink: panic in SITL if unknown message sent 2018-01-10 19:11:15 +00:00
Michael du Breuil 5fedc65efb AP_Airspeed: Allow specifying the MS5525 address 2018-01-10 17:49:35 +00:00
Andrew Tridgell e5813effff RC_Channel: improved efficiency of min_max_configured 
this is quite a costly function due to scan in AP_Param. It takes
about 4 to 5 milliseconds when done as part of AP_Arming
 2018-01-10 16:42:51 +09:00
Tom Pittenger 746ca91649 Plane: reset groundspeed_undershoot value when GPS is lost 
If we lose GPS lock the gndspd undershoot value gets stuck at the last calculated value forever (until GPS locks again)
 2018-01-09 17:05:04 -08:00
Tom Pittenger 1ef0f27786 Plane: allow control_mode enum to be in arbitrary order 
never use control_mode >= BLAH. This requires the order to be important which greatly increases chance for unexpected behavior
Closes https://github.com/ArduPilot/ardupilot/issues/4656
 2018-01-09 17:05:04 -08:00
Tom Pittenger 39a200b83f Plane: allow control_mode enum to be in arbitrary order 
never use control_mode >= BLAH. This requires the order to be important which greatly increases chance for unexpected behavior
Closes https://github.com/ArduPilot/ardupilot/issues/4656
 2018-01-09 17:05:04 -08:00
Peter Barker 404e395880 DataFlash: avoid declarations of SITL-only functions 2018-01-09 23:21:58 +00:00
Peter Barker fd0aa3c659 DataFlash: add validation for Log_Write parameters 2018-01-09 23:21:58 +00:00
Peter Barker 5070628230 DataFlash: factor out validate_structure 2018-01-09 23:21:58 +00:00
mirkix 8d7000db2c AP_HAL_Linux: fix typo 2018-01-09 12:54:03 -08:00
Michael du Breuil 9e37e9ee82 AP_GPS: Remove unused blending function. 
Thanks to ender-chen for noticing, closes #7510
 2018-01-09 12:52:32 -08:00
Peter Barker c8e0ae6890 AC_Fence: adjust fence sys_status failed based on position and parameters 2018-01-09 17:15:19 +00:00
Peter Barker 6bcdab55d0 Copter: rename sys_status methods from geofence_ to sys_status_ 2018-01-09 17:15:19 +00:00
Peter Barker e30a6bbce3 AC_Fence: rename sys_status methods from geofence_ to sys_status_ 2018-01-09 17:15:19 +00:00
Peter Barker a5aafab7ff AC_Fence: use pre-arm checks for sanity checks 
Magically resetting people's parameters not a great look.
 2018-01-09 17:15:19 +00:00
Peter Barker 155407956c AC_Fence: add a pre-arm check for polygon fence validity 
Also change SYS_STATUS bit to be unhealthy if boundary invalid
 2018-01-09 17:15:19 +00:00
Stephen Dade aa7389b455 Tools: Fixed Cygwin SITL package names and made install easier for new users 2018-01-09 14:40:43 +00:00
Peter Barker c56529f39c Tools: waf: remove GCS_Console 2018-01-09 13:46:22 +00:00
Peter Barker aba525e4c5 GCS_Console: remove GCS_Console 2018-01-09 13:46:22 +00:00
Andrew Tridgell d650b4eaa7 mavlink: submodule update 
merge from Amilcar
 2018-01-09 13:04:50 +11:00
Dr.-Ing. Amilcar Do Carmo Lucas f6ab044161 GCS_MAVLink: add microseconds since boot to the home and origin Mavlink messages 2018-01-09 13:01:05 +11:00
Dr.-Ing. Amilcar Do Carmo Lucas 479d4be3fd AP_GPS: Add horizontal, vertical and speed accuracy to the GPS_RAW_INT message 2018-01-09 13:01:05 +11:00
Andrew Tridgell 56d87bfb20 README: update maintainers list 
Rob has moved to alumni
 2018-01-09 12:33:55 +11:00
Peter Barker 077b062701 Copter: change pre-arm checks to allow interlock to be enabled 
With this change we will continue to tell the user their interlock is
enabled, but we will not fail the pre-arm checks.

This will mean that the blinking-LED indicators will show the vehicle as
armable (flashing green / flashing blue), even if the interlock would
prevent arming.

This has the advantage that you don't need your vehicle in the
"dangerous" state to work out whether arming will work when you attempt
to arm it.

Note that we repeat the interlock switch check in the arming checks, and
it WILL fail if the interlock switch is enabled.
 2018-01-09 08:13:06 +09:00
Hiroshi Takey (hiro2233) aa6f66f29b AP_Motors: Updated Motor example. 2018-01-09 08:12:01 +09:00
Peter Barker 8a15c69aff Tools: add --fresh-params option to sim_vehicle.py 
This will rebuild and use the XML file we generate from our
source code which conveys information about our parameters.

When using this option, "param help PARAMETERNAME" should reflect
changes made to the parameter metadata for PARAMETERNAME.
 2018-01-08 14:49:35 +00:00
Peter Barker 114628afe4 Copter: use zero_throttle_and_relax_ac in stab, guided, acro and auto 2018-01-08 12:02:49 +00:00
Peter Barker 8d658e1dbc Copter: correct misleading comment in mode_throw 2018-01-08 12:02:49 +00:00
Randy Mackay 5a5be9175d Rover: 3.2.0-rc4 release notes 2018-01-05 14:02:01 +09:00
Randy Mackay 1bb18bc941 AR_AttitudeControl: get_throttle_out_speed uses timeout definition 2018-01-05 13:33:21 +09:00
Randy Mackay 4ac5ef3a13 AR_AttitudeControl: allow filter to be zero 
Also increase default filter to 50hz
 2018-01-05 13:33:21 +09:00
Randy Mackay 16d3e5c00d AR_AttitudeControl: add feed foward for speed and steering rate control 2018-01-05 13:33:21 +09:00
Randy Mackay 40bb2b0ad9 AR_AttitudeControl: set throttle speed pid dt 2018-01-05 13:33:21 +09:00
Randy Mackay 9930550cfc AR_AttitudeControl: lengthen timeout to 200ms 
This is required because occasionally the turn rate controller can be disabled for just over 100ms as new navigation commands are loaded
 2018-01-05 13:33:21 +09:00
Randy Mackay a2b1807ca0 AR_AttitudeControl: fix turn-rate controller timeout 2018-01-05 13:33:21 +09:00
Randy Mackay 4e8155f4e5 AC_PID: allow non-zero ff gain default 2018-01-05 13:33:21 +09:00
Randy Mackay 072b5187a3 Rover: steering mode reversing fix 2018-01-05 10:23:20 +09:00
Randy Mackay 916fe80000 Rover: remove mode class's desired-lat-accel 
This was a duplicate of the value held in the attitude controller
 2018-01-05 09:27:53 +09:00
Randy Mackay 49493fe6a2 Rover: add calc_steering_to_heading 
removes some duplicate code in Guided and Auto
 2018-01-05 09:27:53 +09:00
Randy Mackay af7bb7cbd7 Tools: update eLAB VEK default parameters 
Add default steering feedforward value
 2018-01-04 16:15:28 +09:00
Randy Mackay 1531801c83 AP_WheelEncoder: minor comment fix 2018-01-04 14:08:17 +09:00
Randy Mackay dc283e9c26 Rover: re-order calc_steering declarations to match .cpp file 2018-01-04 14:07:55 +09:00
Randy Mackay 7b0b9f10de Tools: AION R1 default params use steering feed-forward 
Also add wheel encoder defaults
 2018-01-04 14:03:52 +09:00
Randy Mackay 368698d173 Tools: AION R1 default remove compass-external 
compass-external settings should normally not need to be set
 2018-01-04 14:02:53 +09:00
NickNunno 94eceddf69 Tools: update AION R1 default parameters 
Added default presets to match documentation & hardware setup.
 2018-01-04 13:51:04 +09:00
Matt b5bdaa18ac AP_AVOIDANCE: Minimum altitude for avoidance action 2017-12-30 13:50:42 -08:00
ChrisBird 0fb679b2b2 Sub: Separate max ascent and descent speeds 
This is to match a change made to Copter.

It might be relevant to sub in that users may wish to have asymmetrical descent and ascent rates.

New parameters named:
PILOT_SPEED_UP (technically renamed PILOT_VELZ_MAX)
PILOT_SPEED_DN

Removed parameter PILOT_VELZ_MAX (technically renamed to PILOT_SPEED_UP).

Modes impacted:
ALT_HOLD
CIRCLE
POSHOLD

Update a section in GUIDED mode but I don't think it is ever used but update just in case.

It will use the PILOT_SPEED_UP for ascending max velocity.  For down it will check if
it is 0, if so then it will PILOT_SPEED_UP instead, if non zero it will use PILOT_SPEED_DN.
This retains current behavior and gives the flexibility to change it if desired.

The above behavior is less of a concern for Sub but to keep it consistent its been implemented it the same way.
 2017-12-28 15:16:08 -05:00
dheideman 521bece9e7 AP_JSButton: Add servo toggle button function 2017-12-28 14:14:47 -05:00