Randy Mackay
8d99f204b0
Copter: integrate landing gear option and make edge based
...
also guided mode now retracts landing gear after takeoff
previously landing gear deployment was "level based" meaning the pilot could not override the gear's position
2020-02-26 08:01:00 +09:00
Peter Barker
ce5f23810b
ArduCopter: log disarm method
2020-02-22 12:16:29 +11:00
Peter Barker
e6c6189fe5
Copter: cope with change in namespace of LogEvent enum
...
Also move Acro Trainer types into an enum class as the global defines
interfere with the Event names.
Also eliminate the Log_Write_Event wrappers.
2019-11-05 08:19:26 +08:00
Michael du Breuil
b42b1c08c4
Copter: Support new AP_Vehicle::set_mode
2019-10-25 08:48:22 +08:00
Peter Barker
b4537bebd8
Copter: move control_mode_t into being Mode::Number enum class
...
Fixes this compiler error:
In file included from ../../ArduCopter/sensors.cpp:1:
In file included from ../../ArduCopter/Copter.h:195:
../../ArduCopter/mode.h:1291:9: fatal error: declaration shadows a variable in the global namespace [-Wshadow]
AUTO, // after A and B defined, pilot toggle the switch from one side to the other, vehicle flies autonomously
^
../../ArduCopter/defines.h:38:5: note: previous declaration is here
AUTO = 3, // fully automatic waypoint control using mission commands
^
1 error generated.
2019-09-13 13:12:08 +09:00
Randy Mackay
1818360519
Copter: land mode inits auto yaw
2019-09-12 09:20:39 +09:00
Leonard Hall
c56acb49d6
Copter: Add missing Loiter initialisation lines.
...
This command is missing to define the desired acceleration that loiter will initalise to.
loiter_nav->clear_pilot_desired_acceleration();
2019-07-20 16:40:51 +09:00
Peter Barker
676d75c391
Copter: correct namespacing of Copter modes
...
This makes us look like Rover and Plane in terms of namespacing for the
Mode classes, and removes a wart where we #include mode.h in the middle
of the Mode class.
This was done mechanically for the most part.
I've had to remove the convenience reference for ap as part of this.
2019-06-11 09:18:22 +09:00
Peter Barker
6dce39cbe1
Copter: use AP_Arming methods to arm and disarm vehicle
...
Really just changing the namespace of init_arm_motors
2019-05-30 07:37:30 +09:00
Pierre Kancir
d5d81f3a1c
ArduCopter: set AUTO_YAW_HOLD when user control yaw during nogps land
2019-04-23 09:35:02 +09:00
Pierre Kancir
caf925eda5
Copter: factorize arm or land check
2019-04-16 10:17:47 +09:00
Peter Barker
46a6f45e4a
Copter: adjust for desired spool state and spool state renames
2019-04-14 12:18:03 +09:00
bnsgeyer
94738c3f86
Copter: change make_safe_shut_down to make_safe_spool_down
2019-04-08 09:42:21 +09:00
bnsgeyer
f96da56ad6
Copter: Allow safe shutdown before disarming
2019-04-08 09:42:21 +09:00
Randy Mackay
a6bfafefb0
Copter: move loiter and wpnav init out of make_safe_shut_down
...
resolves autotest RTLSpeed test failure
2019-04-08 09:42:21 +09:00
Leonard Hall
38cc5a817f
Copter: consolidate mode state decisions
...
bnsgeyer and rmackay9 contributed to these changes
make_safe_shut_down waits for spool down before disarming
remove use of attitude_control::set_throttle_out_unstabilized to consolidate logic between multicopters and tradhelis
2019-04-08 09:42:21 +09:00
Randy Mackay
717fb4d823
Copter: integrate AC_WPNav::get_speed rename to get_default_speed
2019-01-31 19:34:32 +09:00
Leonard Hall
2ddb3f6697
Copter: desired-ground-idle replaces spin-when-armed
2019-01-15 11:41:44 +09:00
Randy Mackay
8fdd439827
Copter: land mode minor format fixes
2018-10-27 10:44:19 +09:00
Michael du Breuil
7e1ed948f5
Copter: Cope with AC_PosControl renaming
2018-09-20 15:15:45 -07:00
Leonard Hall
17b61f72a3
Copter: Initialise desired acceleration before loiter init
2018-09-19 08:34:08 +09:00
Randy Mackay
59e4749fd0
Copter: integrate AC_Loiter
...
includes param conversion
2018-04-04 10:45:10 +09:00
Randy Mackay
b3cb491bb1
Copter: minor format fix to mode_land
2018-03-31 14:19:13 +09:00
Ebin
914f3385a4
ArduCopter: Moved land control fn definitions to mode.cpp (NFC)
2018-03-29 16:54:54 +01:00
Ebin
1ff4019ddf
ArduCopter: moved landing control fns from Copter to Mode
...
land_run_horizontal_control(),land_run_vertical_control(),get_alt_above_ground() moved to Mode
2018-03-29 16:50:00 +01:00
Ebin
d8f56b3511
ArduCopter: changed signature for get_pilot_desired_lean_angles()
...
Removes first two redundant input parameters, makes fn non static, makes fn const
2018-03-19 17:51:39 +09:00
Randy Mackay
1a0be015f9
Copter: land, loiter, rtl provide dt to AC_WPNav::set_pilot_desired_acceleration
...
Also fix accelerations/lean-angles for land and rtl-land
2018-03-16 13:50:57 +09:00
Leonard Hall
93de23e7c4
Copter: get-pilot-desired-lean-angles accepts another angle-max
2018-03-16 13:50:57 +09:00
Leonard Hall
9544b1763b
Copter: replace smoothing gain with AC_AttitudeControl::set_input_tc
2018-03-16 13:50:57 +09:00
Peter Barker
25665c5dd9
Copter: correct definition of unused variable when precision landing disabled
2018-02-22 10:26:37 +10:00
Andrew Tridgell
0ed75052f8
Copter: enable parameters inside mode objects
...
this adds FHLD_* parameters for FlowHold mode. It is a large patch as
it needs to disentagle the mode class to enable it to be used in
Parameters.h
2018-02-08 17:36:33 +11:00
Pierre Kancir
cfc69214e6
Copter: add LAND_ALT_LOW parameter
2018-01-24 21:14:35 +09:00
Randy Mackay
8d6f8e4d9c
Copter: move pos-control pids to pos-control library
2018-01-23 12:00:43 +09:00
Leonard Hall
48d0ad26a6
Copter: mode_land sends dt to sqrt controller
2018-01-16 12:13:48 +09:00
Peter Barker
71ad1b5815
Copter: use zero_throttle_and_relax_ac function
2017-12-27 12:09:06 +00:00
Randy Mackay
2d23e1f7c7
Copter: rename flightmode_ objects to mode_
2017-12-12 10:39:26 +09:00
Randy Mackay
c3fbf2671c
Copter: rename control_xx.cpp files to mode_xx.cpp
2017-12-12 10:39:26 +09:00