Sebastian Quilter
2379036e9a
AP_OSD: Add sidebars for MAX7456
2021-09-28 09:04:45 +10:00
Randy Mackay
51d9714dbb
Copter: 4.1.0-rc3 release notes
2021-09-27 17:56:08 -04:00
Randy Mackay
f606fe727a
Tools: conditional-yaw test timeout increased
...
the request is to rotate 360deg at 10deg/sec but the timeout is only 30sec. We need at least 36
2021-09-28 00:17:25 +09:00
Randy Mackay
d4ff180b29
Copter: guided mode remains in takeoff submode longer
2021-09-28 00:17:25 +09:00
Randy Mackay
59d1af2716
Copter: guided takeoff supports autoyaw
...
allows both pilot controlled and externally controlled yaw control
2021-09-28 00:17:25 +09:00
Iampete1
b6a73dd3d0
RC_Channel: renstate ArmDisarm Discription with 4.1 note
2021-09-27 13:33:54 +01:00
Andrew Tridgell
4aa88d172c
HAL_ChibiOS: adjust Swan-K1 parameters
...
limit down pitch to 15 degrees to prevent overspeed, and limit angular
rates to 100 deg/s
2021-09-27 21:21:53 +10:00
Andrew Tridgell
fd5faa866f
Plane: always log QPOS when changing control state
2021-09-27 21:21:53 +10:00
Andrew Tridgell
9d0b7f8efe
Plane: removed set_state to QPOS_POSITION1 in do_vtol_land
...
we are immediately replacing the state with QPOS_APPROACH, so the
set_state is not needed, and triggers a call to
attitude_control->reset_yaw_target_and_rate() which can badly impact
euler rates for tailsitters
2021-09-27 21:21:53 +10:00
Peter Barker
93e6cfef35
autotest: move helicopter tests to own file
2021-09-27 11:58:39 +10:00
Peter Barker
bc664d77b7
autotest: add trivial test for MAVFTP using MAVProxy
2021-09-27 11:42:47 +10:00
Andy Piper
20a91dc1c8
AP_SerialManager: correct docs for SERIAL8
2021-09-26 19:51:50 +01:00
Iampete1
25aedc4ee7
AP_Proximity: lower SF45B update rate
2021-09-26 20:26:20 +09:00
Andrew Tridgell
a749c32974
Tools: build disco static
...
needed for libc version
2021-09-26 19:39:37 +10:00
Peter Barker
b0e59b2611
RC_Channel: rename GENERATOR_ENABLED to HAL_GENERATOR_ENABLED
2021-09-26 19:24:09 +10:00
Peter Barker
341379c5bd
GCS_MAVLink: rename GENERATOR_ENABLED to HAL_GENERATOR_ENABLED
2021-09-26 19:24:09 +10:00
Peter Barker
d86e2792fd
AP_Vehicle: rename GENERATOR_ENABLED to HAL_GENERATOR_ENABLED
2021-09-26 19:24:09 +10:00
Peter Barker
43469955a9
AP_HAL_ChibiOS: rename GENERATOR_ENABLED to HAL_GENERATOR_ENABLED
2021-09-26 19:24:09 +10:00
Peter Barker
5433cbe9a5
AP_Generator: rename GENERATOR_ENABLED to HAL_GENERATOR_ENABLED
2021-09-26 19:24:09 +10:00
Peter Barker
f71b4ec568
AP_BattMonitor: rename GENERATOR_ENABLED to HAL_GENERATOR_ENABLED
2021-09-26 19:24:09 +10:00
Peter Barker
d9844cc75a
AP_Arming: rename GENERATOR_ENABLED to HAL_GENERATOR_ENABLED
2021-09-26 19:24:09 +10:00
Peter Barker
b82b6f1e50
autotest: add test which force-switches to DCM and watches plane land
2021-09-26 17:35:46 +10:00
Peter Barker
ba5e94ad9a
autotest: add load_generic_mission
2021-09-26 17:35:46 +10:00
TunaLobster
dd379af7cc
AP_Scripting: Add Z logger format to example
2021-09-25 14:00:00 +01:00
Peter Barker
6ae280a5d7
autotest: test GPS input using different simulated GPSs
2021-09-25 20:48:41 +10:00
Peter Barker
0d03cef48b
AP_ADSB: tidy sending of SageTech RF mode
...
Saves 64 bytes on CubeBlack
2021-09-25 15:55:53 +10:00
Peter Hall
e83b598040
Plane: Quadplane: check attitude relax before running controllers, don't run controls if not going to output
2021-09-25 12:53:11 +10:00
Tom Pittenger
de753f386c
AP_Vehicle: fix periph-heavy compile errors when INS is disabled
2021-09-24 10:47:13 -05:00
Tom Pittenger
fcfaab4beb
AP_Frsky_Telem: fix periph-heavy compile errors with different things enabled
2021-09-24 10:47:13 -05:00
Tom Pittenger
d45526ff42
AP_Compass: fix periph-heavy compile errors with different things enabled
2021-09-24 10:47:13 -05:00
Tom Pittenger
6ac1b7daf2
GCS_MAVLink: fix periph-heavy compile errors with different things enabled
2021-09-24 10:47:13 -05:00
Josh Henderson
27fa2e776d
AP_HAL_ChibiOS: Hitec-Airspeed move from HAL_NO_GCS to HAL_GCS_ENABLED
2021-09-24 21:05:05 +10:00
Andrew Tridgell
5b0f1b170a
Tools: build Nucleo-L496
...
we want at least one fw for each MCU supported
2021-09-24 18:08:00 +10:00
Andrew Tridgell
6d093e56fb
HAL_ChibiOS: added Nucleo-L496 AP_Periph target
2021-09-24 18:08:00 +10:00
Andrew Tridgell
90bb0d6310
AP_Bootloader: support L496 MCUs
2021-09-24 18:08:00 +10:00
Andrew Tridgell
ca45fcbc70
AP_FlashStorage: support L496 MCUs
2021-09-24 18:08:00 +10:00
Andrew Tridgell
0212e23cd3
HAL_ChibiOS: added support for STM32L496 MCUs
...
good MCU for AP_Periph
2021-09-24 18:08:00 +10:00
lthall
1d6e87e68d
Blimp: Update PSC logging to include desired
2021-09-23 20:07:52 +09:00
lthall
31e7d672c9
AC_AttitudeControl: AC_PosControl: Update PSC logging to include desired
2021-09-23 20:07:52 +09:00
Leonard Hall
087a2b92c3
AP_Logger: Update PSC logging to include desired
2021-09-23 20:07:52 +09:00
Randy Mackay
3438d1b46b
Copter: param conversion for ACRO_RP_RATE, Y_RATE
2021-09-23 20:03:53 +09:00
Leonard Hall
5d5ccc8c78
Copter: Update ACRO to use rate parameters and update expo function
2021-09-23 20:03:53 +09:00
Leonard Hall
77fbcf1741
AP_Math: Control: add expo calculation.
2021-09-23 20:03:53 +09:00
Randy Mackay
1d7d5d23f7
Copter: add acro and pilot yaw rate and expo
2021-09-23 20:03:53 +09:00
Paul Riseborough
c828bdfbc9
AP_NavEKF3: Reduce output observer vertical velocity error when bad IMU
2021-09-23 18:55:28 +10:00
Paul Riseborough
74a7e3b64a
Tools: Rework copter vibration failsafe autotest
...
Allow more time for descent when vibration affected.
2021-09-23 18:55:28 +10:00
Paul Riseborough
8429c66860
AP_NavEKF3: Make subsequent bad IMU event detections faster
2021-09-23 18:55:28 +10:00
Paul Riseborough
458c67639d
AP_NavEKF3: Force velocity state to follow GPS when IMU data is bad
2021-09-23 18:55:28 +10:00
Paul Riseborough
c0d88e2673
AP_NavEKF3: Fix vertical velocity reset
...
Fixes bug that prevents the vertical velocity being reset to the GPS if the position aiding has already timed out and improves sensitivity of the bad IMU data check.
2021-09-23 18:55:28 +10:00
Paul Riseborough
17c2ba5ac1
AP_NavEKF3: Fix bug causing too frequent resets if bad IMU data detected
2021-09-23 18:55:28 +10:00