Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
63,465 Commits 70 Branches 507 Tags 659 MiB
Commit Graph

69 Commits

Author SHA1 Message Date
Peter Barker d462756cbc ArduCopter: move RC bits in mavlink to common code 
Plane's semantics change to be like Copter. Rover, Sub and Tracker will start reporting the bits
 2024-02-10 11:46:44 +11:00
Peter Barker 7377b3f8f2 ArduCopter: allow compilation with HAL_LOGGING_ENABLED false 2024-01-17 18:25:55 +11:00
Peter Barker 9c2d68bcd1 Copter: remove enable_motor_output method 
this doesn't actually do what it says it does.  I think the functionality to set the motors armed was split out long ago but this little method and its misleading comments remained
 2023-03-25 07:57:48 +09:00
Leonard Hall ed0921a418 Copter: Support changing update period in Motors 2022-12-13 17:10:06 +11:00
Randy Mackay dd8fbad653 Copter: integrate RC_Channel's RC_FS_TIMEOUT 
timeout is lengthened for regular RC to 1 sec (was 0.5 sec) to be
consistent with other vehicles
 2022-11-17 07:42:43 +09:00
Andrew Tridgell 161ab4b330 Copter: fixed use of configured() vs configured_in_storage() 2022-06-06 13:11:50 +10:00
murata 9d1c3a2df0 Copter: Change the process description 2021-11-18 09:26:26 +09:00
Iampete1 12c1b3e8f5 Copter: add MOT_PWM param conversion 2021-10-11 22:19:17 -04:00
Iampete1 f487118ee9 Copter: update_throttle_range don't set_throttle_range 2021-10-11 22:19:17 -04:00
Iampete1 456d57c28f Copter: rename armed_with_switch to armed_with_airmode_switch 2021-09-21 09:36:24 +10:00
Andy Piper 8d2f2443a2 Copter: add air mode aux function 2020-06-16 20:30:26 +10:00
Peter Barker d5b1f1651e Copter: remove unneeded set_range calls on RC Aux channels 
This isn't an exhaustive list of channels used for auxillary input, so
that makes this wrong.

RC_Channel goes off the raw get_radio_in values, so setting these is a
pointless and potentially confusing state change.

Also, Plane and Rover don't do this - so things are more consistent
after this.
 2020-01-07 08:41:36 +09:00
Randy Mackay 8724e2f160 Copter: minor comment change 2019-10-22 07:15:48 +08:00
Andrew Tridgell 328fff8585 Copter: fixed RC failsafe handling for no RC receiver 
this stops us using uninitialised values in modes like circle which
can operate either with or without RC input. If we didn't have a RC
receiver attached then they would use a maximum yaw rate (which
produces quite a spectacular result for a tuned up racing quad)
 2019-09-24 10:00:36 +10:00
Randy Mackay eb433508f1 Copter: esc cal startup check moved outside rc output init 
this ensures we don't accidentally enter esc calibration during motor test
 2019-07-22 14:53:36 +09:00
Peter Barker cd2ec1f57f Copter: remove set_default_dead_zone statement with no effect 
This is immediately undone in the unconditional code below the #if
 2019-07-08 09:26:02 +09:00
Peter Barker 3b33f4ca4d Copter: add floating-point-constant designators 2019-04-05 23:04:17 -07:00
Peter Barker c7e21d95ef Copter: move Log_Write_Error into library 2019-03-27 12:36:40 +11:00
IamPete1 ba3d1bc6c7 Copter: move E-stop state to SRV_Channel 2019-02-27 08:51:24 +09:00
Randy Mackay f5208b1664 Copter: minor format fix 2018-12-05 20:12:34 +09:00
Peter Barker 450052aa80 Copter: rewrite read_radio for clarity 2018-09-05 11:54:32 +10:00
Peter Barker a30cdf6806 Copter: eliminate failsafe.rc_override_active 
Use RC_Channels::has_active_overrides() instead
 2018-09-05 11:54:32 +10:00
Peter Barker ec6c59faa3 Copter: move handling of disable-gcs-rc-overrides-channel-option up 2018-09-05 11:54:32 +10:00
Peter Barker e7e56dde7a Copter: move handling of RC switches into RC_Channel 2018-08-01 12:11:30 +09:00
Michael du Breuil 5825222818 Copter: Remove redundant throttle channel setting 2018-08-01 09:19:20 +10:00
Andrew Tridgell 2425c65e74 Copter: implement 'air-mode' for copter 
this implements what betaflight calls 'air-mode'. This gives attitude
control when throttle is at zero, allowing for zero-throttle maneuvers,
plus keeping the copter level on the ground.

This was already implemented if an interlock switch was setup, but it
should also work with an arming switch. If using an arming switch then
throttle should not be considered zero as long as the arming switch
hasn't gone low.
 2018-05-29 10:27:14 +09:00
Michael du Breuil 91a48a5040 Copter: Support new RC_Channels::read_input() 2018-04-26 08:00:09 +10:00
Michael du Breuil d96919ed21 Copter: Use RC_Channels instead of hal.rcin 2018-04-11 21:47:07 +01:00
Pierre Kancir 50c3ed1460 Copter : allow rc_override input at start 
found by chobitsfan
 2018-03-02 16:23:11 +00:00
Andrew Tridgell af4f0c29ba Copter: enable TMODE (ToyMode) support 
this is for the skyviper button based transmitter control
 2018-02-08 17:36:33 +11:00
Andrew Tridgell 0d0f1d264b Copter: fixed order of motor setup 2017-10-22 15:52:50 +11:00
Andrew Tridgell c4b0d7bc35 Copter: removed calls to motors->enable() 2017-10-22 15:52:50 +11:00
Andrew Tridgell 8cf8f3a288 Copter: fixed collective input with H_SV_MAN=1 for heli 
when H_SV_MAN=1 we do direct pass-thru so the user can test swash
range. The problem is that it uses norm_input() for throttle, which
depends on RC3_TRIM. Nowhere else in heli or copter do we depend on
RC3_TRIM, so the user gets a misleading idea of behaviour when testing
their swash.
 2017-09-21 08:52:50 +10:00
Randy Mackay 010dc103be Copter: increase RC input deadzones for roll pitch and yaw 
Copter-3.5 testing resulted in a significant number of users reporting various issues like poshold and autotune were not functioning because their RC inputs were straying out of the deadzones
 2017-06-01 10:10:57 +09:00
Pierre Kancir 436d0f8c84 ArduCopter: radio fix passthrough range on heli/coax/single 2017-05-13 10:19:20 +09:00
Randy Mackay caa2148e45 Copter: move esc calibration startup check to after servo function initialisation 2017-05-11 11:30:05 +09:00
Andrew Tridgell 2ba6e7af35 Copter: fixed aux servos in RC failsafe 
we should always output to channels
 2017-05-01 14:32:18 +10:00
Randy Mackay 032bfad79f Copter: move rc input check to esc_calibration_startup_check 
No functional change
 2017-04-18 09:29:55 +09:00
Randy Mackay 1bfbf0d43f Copter: enable motors at end of initialisation 2017-04-18 09:29:51 +09:00
Lucas De Marchi a589a84e32 ArduCopter: just call set_throttle_range() 
Now set_throttle_range in AP_Motors does the right thing, calling out
the RCOutput method.
 2017-02-26 13:38:24 +11:00
Randy Mackay a25f51c893 Copter: delay up to 2sec for first radio pulse 
Pixracer boards can take 1 second (or possibly longer) to start reading RC input.  This ensure we see the user's high throttle to indicate the user wants to perform the ESC calibration
 2017-01-27 12:14:56 +09:00
Peter Barker ab13b3beaf Copter: make rc checks verbose on failure 2017-01-20 13:02:53 +09:00
Peter Barker bd6ffc025e Copter: start conversion to AP_Arming_Copter 2017-01-17 11:45:08 +09:00
Andrew Tridgell 0f6d0c5ba9 Copter: combined tri, single, coax and multicopter into a single build 
this allows copter to be just 2 builds, one for heli, and one for
everything else
 2017-01-12 17:39:37 +11:00
Andrew Tridgell 5a87ae3f01 Copter: use new SRV_Channels API 2017-01-12 17:39:37 +11:00
Randy Mackay 12d024e0c6 Copter: rename FRAME to FRAME_TYPE 
This unifies the plane and copter parameter names
 2016-12-31 10:55:23 +09:00
Randy Mackay 217757fdc8 Copter: default FRAME_CLASS 2016-12-31 10:55:23 +09:00
Randy Mackay 0ac00dbfd6 Copter: add FRAME_CLASS parameter 2016-12-31 10:55:23 +09:00
Leonard Hall 0523570c5f Copter: reduce dead zone for roll, pitch and yaw input 2016-10-26 21:00:32 +09:00
Leonard Hall 0a6714f4ae Copter: rename variable ROLL_PITCH_YAW_INPUT_MAX 
No functional change
 2016-10-26 20:59:43 +09:00