Leonard Hall
205bac91a1
Copter: loiter spin-up to throttle min (and remove a state)
2016-08-05 12:40:37 +09:00
Leonard Hall
d9deab9e8e
Copter: AltHold pilot feedback only spins up to min throttle
2016-08-05 12:40:37 +09:00
Leonard Hall
34055944cd
AC_PosControl: fix relax_alt_hold_controllers
2016-08-05 12:40:37 +09:00
Randy Mackay
24044e5611
AC_AttControl: get_throttle_avg_max always returns value in 0 to 1 range
...
throttle_avg_max is the total average throttle level (expressed as a number from 0 to 1) that the motors can safely be raised to in order to maintain attitude control. This level can be higher than the pilot's or autopilot provided throttle level.
Previously passing in a negative throttle_in could result in a negative throttle_avg_max being returned.
2016-08-05 12:40:37 +09:00
Leonard Hall
ac04fcd836
AC_AttControl: fix set_yaw_target_to_current_heading
2016-08-05 12:40:37 +09:00
Leonard Hall
011bc0a350
AC_AttControl: add reset_rate_controller_I_terms()
2016-08-05 12:40:37 +09:00
Kazutaka Ozawa
0582cd254e
assignment
2016-08-05 10:40:30 +09:00
Lucas De Marchi
de7ec550ae
waf: readme: update instruction with basic usages
...
Add a new "Basic use" section so people don't get overhauled with build
instructions. They can read about the more advanced commands once they
are able to use the basic ones.
While at it, update the instructions to use the waf wrapper.
2016-08-04 20:04:19 -03:00
Lucas De Marchi
97cb766c0f
build: add waf wrapper
...
Simple wrapper to be extended later so people don't have to type the
huge "./modules/waf/waf-light" command. It has a very primitive way to
try to checkout waf submodule if it isn't there.
2016-08-04 20:04:19 -03:00
Tom Pittenger
5fd3c79202
Plane: Fix typos
2016-08-04 11:42:41 -07:00
Ricardo de Almeida Gonzaga
7a9fe95ccb
ArduPlane: Fix typos
2016-08-04 11:41:18 -07:00
Ricardo de Almeida Gonzaga
1b872b88f8
AntennaTracker: Fix typos
2016-08-04 11:41:18 -07:00
Tom Pittenger
e63e7a5336
AP_NavEKF: comment that param "Enable" index is moved to top
2016-08-04 11:32:46 -07:00
Tom Pittenger
9b33280795
APM_OBC: set param "Enable" to be FLAG_ENABLE and move to top
2016-08-04 11:32:02 -07:00
Tom Pittenger
28648665b9
AP_Terrain: set param "Enable" to be FLAG_ENABLE
2016-08-04 11:31:37 -07:00
Tom Pittenger
ebe829614d
AP_Parachute: set param "Enable" to be FLAG_ENABLE
2016-08-04 11:31:21 -07:00
Tom Pittenger
b1ef848de6
AP_EPM: set param "Enable" to be FLAG_ENABLE
2016-08-04 11:30:50 -07:00
Tom Pittenger
0d14941eea
AP_Avoidance: set param "Enable" to be FLAG_ENABLE
2016-08-04 11:30:39 -07:00
Tom Pittenger
c07b85f9bb
AP_Airspeed: set param "Enable" to be FLAG_ENABLE
2016-08-04 11:30:22 -07:00
Tom Pittenger
dd5ed7e2e0
AC_Sprayer: set param "Enable" to be FLAG_ENABLE
2016-08-04 11:30:03 -07:00
Tom Pittenger
ccb0151816
AC_PrecLand: set param "Enable" to be FLAG_ENABLE
2016-08-04 11:29:45 -07:00
Tom Pittenger
5e811b8463
AC_Fence: set param "Enable" to be FLAG_ENABLE
2016-08-04 11:29:30 -07:00
Tom Pittenger
c090ba2257
Airspeed: store reference in libraries and populate it
...
- also had to move the initial definition in plane.h so it happened before the others.
2016-08-04 11:06:44 -07:00
AndersonRayner
96b287735f
Replay: Convert references to AP_Airspeed.
2016-08-04 10:09:04 -07:00
AndersonRayner
bf7ab052c1
AP_Vehicle: Removed unused airspeed_min and airspeed_max as now part of AP_Airspeed.
2016-08-04 10:09:04 -07:00
AndersonRayner
09d53eaeca
AP_TECS: Convert references to AP_Airspeed.
2016-08-04 10:09:04 -07:00
AndersonRayner
cc5a2417a6
APM_Control: Convert references to AP_Airspeed.
2016-08-04 10:09:04 -07:00
AndersonRayner
da1b18d918
ArduPlane: Convert references to AP_Airspeed. Added automatic migration of ARSPD_FBW_MIN and ARSPD_FBW_MAX (plane parameter) to ARSPD_FBW_MIN and ARSPD_FBW_MAX (library parameter).
2016-08-04 10:09:04 -07:00
AndersonRayner
5439257236
AP_Airspeed: Converted library to be stand-alone from APM:Plane.
...
Additional changes:
ARSPD_FBW_MIN and ARSPD_FBW_MAX renamed to ARSPD_MIN and ARSPD_MAX
ARSPD_MIN and ARSPD_MAX changed to floats
2016-08-04 10:09:04 -07:00
Andrew Tridgell
63317e9430
Plane: added throttle suppression for quadplanes
...
this tries to prevent motor start when on ground. Motors instead go
into spin_when_armed state
2016-08-04 09:43:40 -07:00
Andrew Tridgell
66c4995c9d
AP_Motors: added get_desired_spool_state()
2016-08-04 09:43:40 -07:00
EijiAoki
699d5bf99c
Homework at Dronecode seminar
2016-08-04 09:38:50 -07:00
ikgmats
0b492288e7
Git: add Ikegami Atsushi to GIT_Success.txt
2016-08-04 22:07:11 +09:00
Leonard Hall
22422bd7b3
Copter: autotune bug fix to autotune_updating_p_up_d_down
...
This resolves an issue in which the D term could be reduced far lower than
it should have been.
2016-08-04 21:46:30 +09:00
Randy Mackay
3b86ef71ca
Tools: update EnRoute EX700 parameters
2016-08-04 16:56:46 +09:00
murata
b6c27b58a8
AC_Fence: magic number 4 changed to size of uint32_t
2016-08-04 15:26:18 +09:00
Jonathan Challinger
80f3541933
Copter: add configurable arming delay
2016-08-04 15:19:22 +09:00
Jonathan Challinger
4a6cc75ebb
Copter: whitespace change
2016-08-04 15:17:38 +09:00
Yu Kuwahara
f5b4a482b0
Git: add Yu Kuwahara to Git_Success.txt
2016-08-04 14:42:57 +09:00
okapy
0141fa972f
Git: added Hiroshi Kitaoka to GIT_Success.txt
2016-08-04 14:37:20 +09:00
Randy Mackay
de24d2ca3b
Tools: add EnRoute EX700 frame parameters
2016-08-04 14:37:14 +09:00
Pavel Kirienko
9b786559d4
Fixed missing definition error UAVCAN_IOCS_HARDPOINT_SET
2016-08-04 09:16:02 +10:00
Pavel Kirienko
fccdcf50c1
EPM: fixed build
2016-08-04 09:16:02 +10:00
Pavel Kirienko
8af6af004d
EPM: fixed parameter comments
2016-08-04 09:16:02 +10:00
Pavel Kirienko
accf118e38
UAVCAN hardpoint control
2016-08-04 09:16:02 +10:00
Pierre Kancir
19d94737a0
autotest: move all default params to default_params directory
2016-08-03 17:44:37 -03:00
murata
ec59a83219
Git: add Murata Katsutoshi to Git_Success.txt
2016-08-03 15:16:23 +09:00
Murilo Belluzzo
077e03678f
Global: Adapt Stream class to be used with Ringbuffer
2016-08-03 01:44:02 -03:00
Murilo Belluzzo
b856d26087
RingBuffer: ::set_size now returns true or false
2016-08-03 01:44:02 -03:00
Murilo Belluzzo
f7f203efa9
RingBuffer: Add ::clear() method to discard the buffer content
...
The same could be achieved with ::set_size(::get_size()), but was not
obvious and hurts code readability.
2016-08-03 01:44:02 -03:00