Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
46,877 Commits 70 Branches 507 Tags 660 MiB
Commit Graph

46877 Commits

Author SHA1 Message Date
Randy Mackay 204c839ae0 Copter: mode_smart_rtl uses peek_point 2021-04-03 12:07:59 +09:00
Randy Mackay 193799346c AP_SmartRTL: peek_point method peeks at next point 
includes peek point takes semaphore
 2021-04-03 12:07:59 +09:00
Leonard Hall 64ae08a925 AC_Loiter: fix references to position error 2021-04-03 12:07:59 +09:00
Leonard Hall d0ab74e496 AC_Circle: fix references to position error 2021-04-03 12:07:59 +09:00
Randy Mackay 2201450180 AC_WPNav: renames and comment fixes 2021-04-03 12:07:59 +09:00
Randy Mackay 85b24cf641 AC_WPNav: fix get_wp_destination_loc 
was incorrectly adding alt-above-terrain as if it was alt-above-ekf-origin
also fixup comments
 2021-04-03 12:07:59 +09:00
Leonard Hall 32c27b32aa AC_WPNav: support for SCurve navigation 
set_wp_destination clear yaw target
limit velocity and acceleration based on track slope
add is_active() and remove unused reached_spline_destination
init accepts desired speed
set_kinematic_limits uses current speed limits instead of defaults
add time compression to prevent target moving too fast for air
implement alternative spline
remove vel-target-length
set_wp_destination always calculates this leg
set_kinematic_limits moved to scurve
fix origin speed after spline segment
spline terrain following fix
handle s-curves with mismatching alt types
fix set_spline_destination_next
add update_track_with_speed_accel_limits
Change to next waypoint at corner apex
use scurve advance along track
remove unused definitions and out-of-date todo
set_spline_destination_next sets fast_waypoint
scurve origin speed set from spline target velocity
fixup takeoff delay
 2021-04-03 12:07:59 +09:00
Leonard Hall 6a8ba6f329 AC_PosControl_Sub: update for new position controller changes 2021-04-03 12:07:59 +09:00
Randy Mackay cb0d37586e AC_PosControl: use Vector limit_length and formatting fixes 2021-04-03 12:07:59 +09:00
Leonard Hall ba00c2edd6 AC_PosControl: alt hold controller update 
pass accel limit top_pos_xy
prearm check updated
fix PSC_VELZ_FLTE/D param descriptions
fix VelZ FF param desc
limit maximum desired z component
integrate AC_PID_Basic
 2021-04-03 12:07:59 +09:00
Leonard Hall b73ad1a1bc AC_PosControl: remove unused sqrt_controller_3D 2021-04-03 12:07:59 +09:00
Leonard Hall 49da872218 AC PosControl: fix position error get functions 2021-04-03 12:07:59 +09:00
Randy Mackay e24f23e076 AP_Mission: add restart_current_nav_cmd 2021-04-03 12:07:59 +09:00
Randy Mackay 2357568eb1 AP_Mission: Mission_Command struct gets comparison operators 2021-04-03 12:07:59 +09:00
Leonard Hall 83b7c496b5 AP_Logger: support for position controller logging 2021-04-03 12:07:59 +09:00
Randy Mackay ae66803148 AC_AttitudeControl: minor optimisation and comment fixes 2021-04-03 12:07:59 +09:00
Leonard Hall d6e3495eca AC_AttitudeControl: support for feedforward rate in angle request for yaw 2021-04-03 12:07:59 +09:00
Leonard Hall 1d720cc5e9 AC_PID: library update and additional functions 
includes corrections from peer review
 2021-04-03 12:07:59 +09:00
Randy Mackay bc0da915c4 AP_Math: add SplineCurve library 
Co-authored-by: Leonard Hall <leonardthall@gmail.com>

includes corrections from peer review
 2021-04-03 12:07:59 +09:00
Leonard Hall af7403f4e9 AP_Math: add SCurve library 
SCurve const more local variables
rename update to get_jerk_vel_pos_at_time
removed unused update
debug output in SITL
fixes to ensure finished at end of path
fixes including validity check
includes corrections from peer review
 2021-04-03 12:07:59 +09:00
Randy Mackay 0e506a71a1 AP_Math: remove control's limit_vector_length 
these have been moved to Vector2f and Vector3f
 2021-04-03 12:07:59 +09:00
Randy Mackay e2b46d05dc AP_Math: Vector2,3 get limit_length methods 2021-04-03 12:07:59 +09:00
Leonard Hall 3bb0482795 AP_Math: add update_pos_vel_accel to control 
also add shape_vel, shape_pos_vel and stopping_distance
also add calculation of kinematic limits
 2021-04-03 12:07:59 +09:00
Randy Mackay 67f2c79717 AP_InternalError: added invalid_arguments failure 
this is intended to catch problems where we have unexpectedly received
invalid arguments.  For example an out-of-bounds target speed that
should have been caught somewhere else.

running out of bits so we use a single bit to capture invalid inputs to or output from a calculation
 2021-04-03 12:07:59 +09:00
Peter Barker f0094bac40 autotest: remove copied-in duplicate of pymavlink rotmat 2021-04-03 13:26:06 +11:00
Peter Barker dfa342a79f autotest: correct rc-values-good debug 2021-04-03 08:59:14 +11:00
Peter Barker 7d9daccdf7 autotest: fix mavproxy switch test 
The order in which we fix the environment means that we need to be
listening on the correct port for rc values - so just fix it in the test
 2021-04-03 08:58:52 +11:00
Peter Barker d384ba6585 autotest: increase time permitted for Copter to turn east 
Sometimes they turn almost 360 which takes a while
 2021-04-02 21:29:43 +11:00
Peter Barker 2c6bdd200c autotest: fix make_safe_filename for Valgrind 
Valgrind treats this as a format string so the % is bad
 2021-04-02 20:51:18 +11:00
Peter Barker 18ded114ae Tools: param_metadata; stop prettifying XML before emitting 
indent is not available on our documentation server:

[build_parameters.py]
Traceback (most recent call last):
  File "./param_parse.py", line 422, in <module>
    do_emit(XmlEmit())
  File "./param_parse.py", line 415, in do_emit
    emit.close()
  File "/home/wiki/build_wiki/ardupilot/Tools/autotest/param_metadata/xmlemit.py
", line 24, in close
    etree.indent(self.paramfile)
AttributeError: module 'lxml.etree' has no attribute 'indent'
 2021-04-02 14:39:39 +11:00
Peter Barker 018b1425ce AP_AdvancedFailsafe: remove APM from description 2021-04-01 22:49:34 +11:00
Peter Barker cee348d082 Tools: make and declare bisect-helper.py flake8-compliant 2021-04-01 19:11:50 +11:00
Peter Barker ee79895a4e Tools: make and declare examples.py flake8-compliant 2021-04-01 19:11:50 +11:00
Peter Barker 79d34b3b64 Tools: make and declare build_binaries.py flake8-compliant 2021-04-01 19:11:50 +11:00
Peter Barker fff4aa8bde autotest: increase allowed time for climb_before_turn to get home 2021-04-01 19:11:31 +11:00
Josh Henderson fb789a07ce AC_WP_Nav_OA: origin_loc & dest_loc should use _terrain_alt_oabak 2021-04-01 14:44:40 +09:00
Sergey Bokhantsev ef95bf088c AP_Motors: Constrain get_throttle_hover value with allowed range 2021-04-01 13:06:02 +09:00
Peter Barker f988064e48 Tools: add a tool to help determine best speedup for autotest 2021-04-01 11:27:17 +11:00
Peter Barker d2c00f7b26 autotest: ensure RC thread is killed after each run_test 
Every run_test starts a thread.  del is not being called.  So clean it
up in the caller
 2021-04-01 11:00:54 +11:00
Peter Barker 500679ec5b autotest: correct creation of default parameters 
Simulation won't start if nothing is connected to 5760 - so just connect
mavproxy there
 2021-03-31 23:29:47 +11:00
Samuel Tabor a301808e7a SITL: Add parsing of airspeed to SIM_JSON 2021-03-31 19:26:02 +11:00
Iampete1 0b8cdaf392 AP_Scripting: add mission command receve function, binding and example 2021-03-31 19:23:13 +11:00
Iampete1 849ad8c6de AP_Mission: support MAV_CMD_DO_SEND_SCRIPT_MESSAGE 2021-03-31 19:23:13 +11:00
Iampete1 82228469c8 AP_Scripting: add reset_remianing battery binding 2021-03-31 19:21:59 +11:00
Iampete1 9fdceeded3 AP_BattMoniter: add reset remaining per-instance rename existing to _mask 2021-03-31 19:21:59 +11:00
Iampete1 0fe38da522 GCS_MAVLink: rename battery reset function 2021-03-31 19:21:59 +11:00
Randy Mackay d343c569c2 AP_Arming: check for only first compass being disabled 
If only the first compass is disabled, users may expect other enabled compasses to be used but they won't be
 2021-03-31 19:16:01 +11:00
Randy Mackay 64c4b6a42b AP_Compass: remove unused set_use_for_yaw 2021-03-31 19:16:01 +11:00
Ari Krupnik c6bf7475f2 Rover: fixing typo in comment 2021-03-31 16:31:13 +11:00
Peter Barker ba972b6b46 autotest: fix --map option 2021-03-31 16:30:25 +11:00