Commit Graph

42 Commits

Author SHA1 Message Date
Michael du Breuil 8ae6e0d613 Rover: remove "Command received" statustext 2016-03-10 15:36:05 +11:00
Tom Pittenger 0372b52378 Rover: convert to using static send_statustext
- no more MSG_STATUSTEXT
- TODO: replace calls to gcs_send_text and gcs_send_text_fmt to GCS_MAVLINK::send_statustext()
2016-02-24 09:18:05 +11:00
Andrew Tridgell 39b9ae7e91 APMrover2: log a picture if AP_Camera::control() returns true 2016-01-29 10:01:51 +11:00
Siddharth Bharat Purohit 53d3e7dc61 Rover: wire up accel calibrator for Rover 2015-12-29 10:46:35 -08:00
DonLakeFlyer 0950c97866 Rover: return success or failure of get home position 2015-12-07 12:33:18 +09:00
Peter Barker fb197c9255 Rover: DataFlash-over-MAVLink support 2015-12-03 13:21:52 +11:00
Luis Vale Gonçalves 999e99c6f3 Rover: revise text messages
Text revisions on Rover. Uniformization on messages severity.
2015-11-25 20:50:00 +09:00
Caio Marcelo de Oliveira Filho ee073787c8 Rover: use millis/micros/panic functions
Instead of going through 'hal' then 'scheduler', use directly the AP_HAL
functions. Besides removing indirection that is not necessary for such
functions, this patch ends up reducing the code size in the call sites.

For example, building ArduCopter for PX4 with this change (compared to
before introduction of the functions) yields almost 3k bytes of code
size.

    # ArduCopter build before the functions (1b29a1af46)
       text	   data	    bss	    dec	    hex	filename
     895264	   2812	  62732	 960808	  ea928	/.../px4fmu-v2_APM.build/firmware.elf

    # ArduCopter build after this patch
       text	   data	    bss	    dec	    hex	filename
     892264	   2812	  62732	 957808	  e9d70	/.../px4fmu-v2_APM.build/firmware.elf

A later patch will remove the unused functions in the Schedulers.
2015-11-20 12:26:14 +09:00
Grant Morphett 3636b53313 Rover: Implementation of the ARMING functionality 2015-11-11 13:39:38 +11:00
lvale a64689600f Rover: text message severity uniformization
Global revision of message severity values.

Required also change to the low priority function gcs_send_text_fmt()
on GCS_Mavlink.cpp to disable the automatic setting of priority on
messages sent by this function
2015-11-05 12:33:56 +09:00
Lucas De Marchi 1a084e5dcd APMrover2: remove check for AVR CPUs
Remove the checks for HAL_CPU_CLASS > HAL_CPU_CLASS_16 and
HAL_CPU_CLASS >= HAL_CPU_CLASS_75. Corresponding dead code will be
removed on separate commits.
2015-11-04 12:14:14 +11:00
Lucas De Marchi 1b07dabeb7 Replace prog_char and prog_char_t with char
prog_char and prog_char_t are now the same as char on supported
platforms. So, just change all places that use them and prefer char
instead.

AVR-specific places were not changed.
2015-10-30 14:35:30 +09:00
Lucas De Marchi 4ab9821624 Replace use of Log_Write_Message_P() with Log_Write_Message() 2015-10-30 14:35:28 +09:00
Lucas De Marchi 89fc4f4b62 Replace use of send_text_P() with send_text() 2015-10-30 14:35:17 +09:00
Lucas De Marchi 831d8acca5 Remove use of PROGMEM
Now variables don't have to be declared with PROGMEM anymore, so remove
them. This was automated with:

    git grep -l -z PROGMEM | xargs -0 sed -i 's/ PROGMEM / /g'
    git grep -l -z PROGMEM | xargs -0 sed -i 's/PROGMEM//g'

The 2 commands were done so we don't leave behind spurious spaces.

AVR-specific places were not changed.
2015-10-30 14:35:16 +09:00
Lucas De Marchi 84da1f5039 Rename gcs_send_text_P to gcs_send_text 2015-10-30 14:35:07 +09:00
Lucas De Marchi 84d5fb006f Remove use of Util::{v,}snprintf_P()
These are now the same function as Util::snprintf().
2015-10-30 14:35:05 +09:00
Lucas De Marchi 2c38e31c93 Remove use of PSTR
The PSTR is already define as a NOP for all supported platforms. It's
only needed for AVR so here we remove all the uses throughout the
codebase.

This was automated with a simple python script so it also converts
places which spans to multiple lines, removing the matching parentheses.

AVR-specific places were not changed.
2015-10-30 14:35:04 +09:00
Randy Mackay 93b0dd4d61 Rover: add no break comment to avoid compiler warning 2015-10-03 12:56:26 +09:00
Randy Mackay 836fff2119 Rover: send home position when home is set or get-home msg received 2015-10-03 12:56:21 +09:00
Andrew Tridgell 64410b10fb Rover: use ahrs.send_ekf_status_report() 2015-09-29 10:59:28 +10:00
Randy Mackay bcc87a9a3b Rover: replace SKIP_GYRO_CAL with INS_GYR_CAL
Also calibrate gyros during accel trim
2015-09-21 17:06:45 +09:00
squilter 97b901a5fb Rover: Support do_digicam_x via command_long 2015-09-16 13:06:55 +09:00
Grant Morphett 90b48fe46a Rover: Fixing issue 327 - reporting Baro alt instead of GPS 2015-09-08 09:40:39 +10:00
Randy Mackay 958d279b7c Rover: support do-mount-control via command-long 2015-09-06 16:01:28 +09:00
Siddharth Bharat Purohit b8a9f9ebc5 APMrover2: implement on-board compass calibration for APMrover 2015-09-03 16:59:14 +10:00
Randy Mackay 84252405c3 Rover: sanity check ROI target 2015-08-27 15:15:59 +09:00
squilter b4cf0ce2bb Rover: update severity values 2015-08-25 14:04:40 +09:00
squilter 06eb53402f Rover: define and send FIRMWARE_VERSION 2015-08-23 09:21:53 +09:00
Tom Pittenger 2319bdb068 Rover: queue MISSION_ITEM_REACHED
clean up unreachable code
2015-08-19 15:42:08 +10:00
Grant Morphett f4d319ba83 Rover: Including the sonar/rangefinder status in SYS_STATUS message 2015-08-12 06:34:26 -07:00
Andrew Tridgell 3ce5f62420 Rover: prevent build error with MSG_RPM 2015-08-12 15:03:51 +10:00
Peter Barker 4b0495bb15 Rover: use common mission logging code 2015-06-30 16:23:35 +10:00
Grant Morphett a602173c45 Rover: added the PID logging for steering into the mavlink message.
Copter/Plane already have this PID logging in the mavlink stream to
the GCS and now Rover does too.
2015-06-19 09:55:19 +10:00
Randy Mackay fe1da458a7 Rover: avoid compiler warning re to new VIBRATION msg 2015-06-12 21:36:53 +09:00
Eugene Shamaev 3ecead9d3c Rover: added DSM bind support 2015-06-10 17:19:09 +10:00
Grant Morphett f314b243ee Rover: Make guided operate the same way as Plane/Copter.
This is a safety change.  Lets say you have a GCS which is in
followme mode which is really GUIDED mode with continually updated
waypoints.  If the user then changes mode with the RC transmitter to
HOLD or anything else then the Rover should STOP listening to the
updated guided mode waypoints.  This is how Plane/Copter work.
2015-06-05 21:07:00 +10:00
Andrew Tridgell 254d4219d4 Rover: fixed build 2015-05-27 14:28:48 +10:00
Lucas De Marchi 2f5314a1a6 APMrover2: use functor macros
Functor is not yet being used but let's make is macro fallback to the
previous Delegate implementation for easy of transition between the two.
2015-05-26 13:46:54 +10:00
Andrew Tridgell 3a28811909 Rover: removed remaining warnings from PX4 build 2015-05-21 07:48:50 +10:00
Andrew Tridgell b47a09b709 Rover: fixed build of .cpp files 2015-05-21 07:48:49 +10:00
Andrew Tridgell 2b6835d187 Rover: rename all .pde files to .cpp files 2015-05-21 07:48:49 +10:00