Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
49,954 Commits 70 Branches 507 Tags 662 MiB
Commit Graph

177 Commits

Author SHA1 Message Date
Andy Piper 513aa592e4 AP_Motors: add accessors for turtle mode 2021-08-12 19:00:51 +09:00
Andrew Tridgell 4b9311d87d AP_Motors: added new MOT_PWM_TYPE=8 for PWM range 
this allows multirotors to set individual PWM ranges per motor. This
is needed for heliquads flying as multirotors
 2021-07-28 17:40:40 +10:00
Iampete1 6848cbc241 AP_Motors: add scripting dynamic mixer, allowing varable geometry vehicles 2021-07-20 09:19:28 +10:00
Peter Barker c28a03728d AP_Motors: tidy frame description strings 
Before: AP: Frame: TRI/
After: AP: Frame: TRI
 2021-06-21 16:30:37 +10:00
Andy Piper 7c213a8bbf AP_Motors: move AP_MotorsUGV here 
add singleton and motor_mask to AP_MotorsUGV
 2021-06-07 20:16:26 +09:00
Andrew Tridgell ea3657e941 AP_Motors: added accessors for ff output to motors 
needed for tailsitters
 2021-04-13 10:28:47 +10:00
Iampete1 5c3725d899 AP_Motors: add 6DoF scripting matrix mixer 2021-02-09 12:43:54 +09:00
Mark Whitehorn 9bc8a8c912 AP_Motors: make frame*string getters more const 2021-02-09 12:43:53 +11:00
Mark Whitehorn 6b2184a53a AP_Motors: add frame_class and frame_type strings 
move frame_class/type string assignments down into subclasses
 2021-02-09 12:43:53 +11:00
Iampete1 fca6f7027b AP_Motors: allow Matrix config from scripting 2021-01-26 11:07:36 +09:00
Peter Hall d0e1e85b9e AP_Motors: add get_frame_mav_type 2021-01-26 11:07:36 +09:00
Peter Barker 8f8283e0f0 AP_Motors: rc_map_mask -> motor_mask_to_srv_channel_mask 
the naming of this function precedes our rc/srv-channel split
 2021-01-05 10:19:32 +11:00
bnsgeyer 6c8a85ee04 AP_Motors: updates to new integrator and make selectable 2020-12-21 23:33:48 -05:00
murata 159a6c7ed6 AP_Motors: Support for decacopters 2020-12-08 11:59:10 +11:00
Peter Barker 41ab59dcdb AP_Motors: eliminate flags structure 
Saves about 44 bytes
 2020-09-22 20:26:24 +10:00
Andrew Tridgell 134d8b941b AP_Motors: added betaflight-x-reversed frame type 2020-01-16 19:13:13 +11:00
Mark Whitehorn 68dcab3edb AP_Motors: add copter tailsitter differential torque frames 2019-12-18 08:33:29 +11:00
Gone4Dirt 98a4335af4 AP_Motors: Added support for autorotation 2019-11-29 08:06:10 +08:00
Bill Geyer 63d9b47530 AP_Motors: make init_targets_on_arming global 2019-10-16 08:17:09 +09:00
Leonard Hall 4a1a5e81ea AP_Motors: Add variable to record the final thrust value 
Add Throttle_Out for other frames
 2019-10-10 20:26:02 +09:00
Leonard Hall 036b47ec56 AP_Motors: Add seperate roll and pitch limits 2019-08-03 12:06:32 +09:00
Leonard Hall 0bb9db5139 AP_Motors: add feedforward input to mixers 2019-07-25 17:38:15 +09:00
Leonard Hall 77f8ec9f43 AP_Motors: formatting fixes 2019-07-12 09:29:40 +09:00
1iggy2 7323a5da9d AP_Motors: Added Octo I frame 2019-06-04 09:49:44 +09:00
Peter Barker 1e606cdc5b AP_Motors: make desired spool state and spool state enum-classes 
This will help avoid getting the enumerations mixed up
 2019-04-14 12:18:03 +09:00
Tom Pittenger 3bbd80a5de AP_Mount: unify singleton naming to _singleton and get_singleton() 2019-02-10 19:09:58 -07:00
Andrew Tridgell cf8b059531 AP_Motors: added 3 more motor orders for X quads 
- betaflight X
 - DJI X
 - clockwise X
 2019-02-06 11:17:35 +11:00
bnsgeyer ac87b3e1e5 AP_Motors: spool state moved from multi to parent 
Also rename SPIN_WHEN_ARMED to GROUND_IDLE
 2019-01-15 11:41:44 +09:00
IamPete1 c82f158b56 AP_Motors: add get roll factor 2019-01-15 10:19:19 +11:00
Andrew Tridgell d907c5757d AP_Motors: added PlusRev motors type 
this is a plus frame with reversed motor direction, needed for quad in
Morse simulator
 2018-12-04 09:44:50 +11:00
Leonard Hall 4774cb8daf AP_Motors: improved motor loss redundancy 
This detects a failed motor on copters with at least 6 motors
and recalculates the mixer to compensate
 2018-10-16 00:44:50 +09:00
bnsgeyer dec8c5de77 AP_Motors: convert heli code to use SRV_Channels 
this converts the heli code to use the SRV_Channels output
functions. It does not change behaviour, but removes the last vehicle
type that did its own servo output calculations.  This change also
fixed servo initialization conflicts.

Note that this also allows helis to be setup with more than one
channel for a particular output (eg. two separate channels for tail
servo if they are wanted). This isn't likely to be used much, but does
make heli consistent with other vehicle types
 2018-07-16 12:41:16 +10:00
Jacob Walser abcb845af5 AP_Motors: refactor output_test -> output_test_seq 2018-07-02 11:31:58 -04:00
Andrew Tridgell 4e414c02f5 AP_Motors: use scaled actuators for single and coax frames 
this allows for multiple servos with the same motor function
 2018-05-21 13:04:13 +10:00
Andrew Tridgell 80a1688361 AP_Motors: make a singleton 
this is used by AP_ESCSerial
 2018-04-07 09:10:29 +10:00
Andrew Tridgell 2c84d77306 AP_Motors: setup for DShot output modes 2018-04-07 09:10:29 +10:00
Michael du Breuil 98e327640d AP_Motors: Use battery singleton 2018-03-27 22:12:21 +01:00
Andrew Tridgell 1e62b5d5c7 AP_Motors: many to one mapping of motors 
this allows multiple outputs for one motor number
 2017-10-22 15:52:50 +11:00
Andrew Tridgell 03e1f6967f AP_Motors: removed enable() API 
all output channels are already enabled by SRC_Channels::enable_aux_servos()
 2017-10-22 15:52:50 +11:00
Andrew Tridgell 55d5fe843e AP_Motors: added Heli_Quad backend 
supporting collective pitch quadcopters
 2017-10-03 10:16:41 +11:00
Andrew Tridgell abd0831239 AP_Motors: changed BRUSHED16kHz to BRUSHED 2017-06-17 17:37:45 +10:00
Leonard Hall 9e86732edc AP_Motors: accept external battery resistance estimate 2017-06-06 14:57:04 +09:00
murata 66fc49889b AP_Motors: add dodeca-hexa 2017-05-27 14:21:13 +09:00
Andrew Tridgell 1ad5e1db4e AP_Motors: integrate AP_MotorsHeli_Dual 
fixed issues with combining with Heli_Single
 2017-03-25 16:22:10 +11:00
Rustom Jehangir 237ba87ca4 AP_Motors: New AP_Motors6DOF used by Sub 2017-02-21 11:26:14 +11:00
Andrew Tridgell 1a74b7fc0c AP_Motors: started on tailsitter support 2017-02-18 17:26:43 +11:00
Andrew Tridgell af44e9fdbd AP_Motors: added frame type 11 for Y6 to match FireFly6 
using same motor output mapping as AvA
 2017-02-06 16:18:58 +11:00
Andrew Tridgell 638f1364be AP_Motors: adapt to new RC_Channel API 2017-01-12 17:39:37 +11:00
Randy Mackay bdfb12123f AP_Motors: fix frame-type enum for Y6B 
Also remove unused NEW_PLUS
 2016-12-31 10:55:23 +09:00
Randy Mackay 7be0f437a9 AP_Motors: consolidate matrix multicopters 
AP_MOTORS_x_FRAME definitions moved to motor_frame_type enum
init function and now accepts frame-class and type to perform initial motor setup
set_frame_class_and_type allows real-time changing of motor setup
initialised_ok flag and accessor records whether setup was successful
 2016-12-31 10:55:23 +09:00