tridge60@gmail.com
1dc0063e67
HIL: fixed radio_status in setHIL() for APM_RC
...
thanks to Michael Oborne for noticing this!
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2952 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-28 12:11:25 +00:00
rmackay9@yahoo.com
b930b892c2
DataFlash library - changed to use standard arduino SPI library
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2928 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-19 23:00:18 +00:00
rmackay9@yahoo.com
ab8d8fedb9
AP_OpticalFlow - fixes to position calculations (lat was reversed and would calculate position even with surface quality was very low)
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2913 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-18 21:51:27 +00:00
jasonshort
5c3113955d
doubled Slew rate limiter to 2 m/s max @ 10 hz.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2912 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-18 18:18:47 +00:00
tridge60@gmail.com
f915eb7052
GPS-HIL: set new_data on setHIL()
...
this fixes navigation for ACM in HIL
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2909 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-18 12:42:36 +00:00
jasonshort
de76785499
Added a slew rate limit
...
reworked filter, same results, just wanted to get rid of modulus.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2900 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-17 19:05:18 +00:00
tridge60@gmail.com
c22ebd22b4
compass: fixed a compiler warning
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2844 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-13 09:10:24 +00:00
tridge60@gmail.com
d71ed55596
build: added EXTRAFLAGS to make rules
...
this allows you to create a local makefile like this:
include Makefile
hil:
make -f Makefile EXTRAFLAGS="-DHIL_MODE=HIL_MODE_ATTITUDE -DSERIAL3_BAUD=115200"
and then use 'make hil'
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2843 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-13 09:07:09 +00:00
jasonshort
f6e5825349
Cleaned up or reverse code.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2842 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-13 05:54:40 +00:00
tridge60@gmail.com
db2e139812
fixed 5843 detection code
...
we were looking for the wrong regA value
Thanks to Chris for the debugging help! (and happy birthday!)
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2828 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-09 22:27:15 +00:00
tridge60@gmail.com
ddb823829d
compass: added error checking on I2C transactions
...
this adds error checking to all operations on the compass, to ensure
that we don't accept invalid data
This also fixes the calibration values for the 5883L to match the
recommended values in the spec
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2815 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-09 12:10:00 +00:00
tridge60@gmail.com
a45c33727a
mavlink: fixed a signed/unsigned warning
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2814 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-09 12:09:50 +00:00
jasonshort
d18262b729
Added heavily filtered Accelerometer values for experimentation.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2779 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-08 03:58:19 +00:00
jasonshort
ce7dc48026
added ki_Yaw private variable and accessors.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2778 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-08 03:57:12 +00:00
jasonshort
8a0843e69a
Added a limit to the atan function to calc the heading. Just trying to avoid, bad values screwing up the DCM. - Jason
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2777 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-08 03:56:04 +00:00
deweibel@gmail.com
45e57a0639
Commit test - just adding an unneeded comment
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2740 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-03 19:39:55 +00:00
tridge60@gmail.com
02351bd23a
compass: fixed normal operation mode change for 5883L
...
We need to set the right rates after config too. Thanks to Randy for
spotting this one
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2737 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-03 12:00:45 +00:00
tridge60@gmail.com
cde84445b3
compass: fixed output rate and averaging for 5883L
...
we need to setup the right output rate, or the compass gets very laggy
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2736 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-03 08:32:58 +00:00
tridge60@gmail.com
8fcceaa919
AP_Compass: fixed calibration of 5883L compass
...
this fixes a compass initialisation bug where if the first value from
the compass isn't in the right range we would set bad calibration
scaling factors.
This also changes the maximum acceptable calibration values to 2000,
which is needed for the 5883 compass
pair-programmed-with: Randy Mackay
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2718 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-02 11:31:38 +00:00
tridge60@gmail.com
e9bb030fd4
AP_Compass: report compass initialisation failure
...
don't just put out rubbish values
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2717 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-02 11:31:27 +00:00
rmackay9@yahoo.com
fd2547216d
AP_Compass_test - added display to auto detected compass
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2716 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-01 16:26:27 +00:00
jasonshort
98632a97c0
temporally revert to prior version of Sonar class to narrow in on a bug.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2708 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-30 22:32:26 +00:00
rmackay9@yahoo.com
f7ba02f825
AP_Compass - added auto detect of 5843 vs 5883L to AP_Compass_HMC5843 class
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2700 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-28 16:47:53 +00:00
rmackay9@yahoo.com
151aa5d415
AP_Compass - added auto detect of 5843 vs 5883L to AP_Compass_HMC5843 class
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2699 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-28 16:30:42 +00:00
jasonshort
db0e5760a4
removed redundant FP calcs for speed up.
...
added ability to alternate normalization and drift correction. Not fully implemented, needs further testing.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2691 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-26 22:54:08 +00:00
jasonshort
ebfb132f34
IMU speedup by shorting the temp calculation. If someone bothers to temp calibrate their sensors, they'll need to edit this shortcut.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2677 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-26 06:23:22 +00:00
DrZiplok
569087199d
Add a simple tool for dumping AP_Var data from an EEPROM dump.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2676 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-25 07:56:38 +00:00
james.goppert
6959c2d6f9
Added debug/ upload targets to Arduino.mk
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2656 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-23 21:36:20 +00:00
james.goppert
f2457c94d9
Added config.mk file inclusion for global configurations settings on make based builds. See ArduPilotOne for scripts/configure to see an example. config.mk should be located in the temporary directory where the rest of the build results are placed.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2655 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-23 19:01:06 +00:00
DrZiplok
8ab94794cd
Enable map file generation.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2636 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-22 05:54:55 +00:00
deweibel@gmail.com
71d4015bc8
revert gps lib to 2602
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2608 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-21 01:38:31 +00:00
deweibel@gmail.com
b99362dc18
remove static declaration from idleTimeout
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2607 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-21 01:26:57 +00:00
deweibel@gmail.com
8a35079907
clean up idleTimeout
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2606 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-21 01:20:39 +00:00
deweibel@gmail.com
0a0c6f9c26
Fix initialization of idleTimeout
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2602 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-20 21:11:45 +00:00
jasonshort
d090f92b66
Vector3<T>() { x = y = x = 0; }
...
changed to :
Vector3<T>() { x = y = z = 0; }
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2600 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-20 16:31:31 +00:00
jasonshort
b70d2d4c29
update to Baro lib to remove temp filtering.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2569 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-18 05:08:48 +00:00
jasonshort
3c27be40fc
silly formatting
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2566 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-16 16:43:43 +00:00
jasonshort
16d1e5d0b8
removed some initial settings
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2565 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-16 16:35:11 +00:00
jasonshort
350b2c5ea2
added optimization note
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2564 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-16 16:34:23 +00:00
jasonshort
dafe217178
made timeout public, settable
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2563 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-16 16:33:08 +00:00
jasonshort
cb7da41e55
removed duplicate filter from ADC based input
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2562 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-16 16:30:37 +00:00
tridge60@gmail.com
60ae24dca6
disable the re-ordered initialisation warnings
...
these are not useful for us, and will always happen with our parameter
code
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2561 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-15 12:25:10 +00:00
tridge60@gmail.com
24491fce74
fixed warnings in PID.h
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2560 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-15 12:25:00 +00:00
tridge60@gmail.com
88b00edaf3
fixed warnings in AP_DCM
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2559 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-15 12:24:51 +00:00
tridge60@gmail.com
439b65324d
fixed a warning in AP_Var.h
...
index is in system headers as a string function
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2558 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-15 12:24:40 +00:00
jasonshort
153c166ef3
Based on Doug's recommendation - increased Accel weighting to .66 – 1.33 Gs
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2557 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-14 23:37:43 +00:00
jasonshort
e63fe14ce7
the temp change in the state machine didn't really help the altitude issue after all. Need more testing as the temp sway is the major factor in the lack of air pressure accuracy.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2556 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-14 15:46:38 +00:00
jasonshort
ab6bafbd5c
reworked filter on temperature.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2554 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-14 05:08:11 +00:00
jasonshort
65e161cbfb
removed filter on temp, was causing init problems.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2553 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-14 04:51:07 +00:00
jasonshort
d2330b4239
Adjusted the state machine to read the temperature less often (from twice a second to every 4 seconds). Added a small smoothing filter.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2552 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-12 23:57:36 +00:00