Henry Wurzburg
1db7c92603
AP_HAL_ChibiOS:Add defaults for KakuteH7Mini-NAND
2022-10-11 10:52:05 +11:00
Peter Barker
93db267204
AP_HAL_ChibiOS: make emitting nice strings on aux functions a selectable feature
2022-10-11 10:23:19 +11:00
Peter Barker
3f98e3aacb
hwdef: use an include file for boards requiring generic feature minimization
2022-10-11 10:23:19 +11:00
Andrew Tridgell
fdff3d57ac
hwdef: removed unused AP_FEATURE_BRD_PWM_COUNT_PARAM
2022-10-07 11:38:15 +11:00
Andrew Tridgell
861bd06034
hwdef: added warning messages about flash size
2022-10-06 10:58:46 +11:00
Andrew Tridgell
07f80c2442
HAL_ChibiOS: make check_limit_flash_1M() available in main firmware
2022-10-06 10:58:46 +11:00
Andrew Tridgell
e5b46eb2a7
HAL_ChibiOS: fixed build error with gcc 11.3
2022-10-06 10:45:49 +11:00
Andrew Tridgell
d919a7f8f4
hwdef: reduce flash usage to allow build
2022-10-06 10:31:51 +11:00
Peter Barker
0bd08a4a82
AP_HAL_ChibiOS: add AP_GRIPPER_ENABLED
2022-10-04 10:58:34 +11:00
Peter Barker
670a1dbdb1
hwdef: disable RPM on skyviper
2022-10-04 10:58:34 +11:00
Andrew Tridgell
a14b77db74
hwdef: added MatekL431-GPS build
...
this sets up for DMA on GPS UARTs, disables unnecessary UARTs and SPI
and disables unnecessary sensor types
the changes make moving baseline GPS with two DroneCAN GPS modules on
MatekL431 much more reliable
2022-10-03 17:30:59 +11:00
Andrew Tridgell
805e194b0b
hwdef: disable compass cal for herePro
...
it doesn't work as diagonals and offdiagonals not available
2022-09-30 21:25:36 +10:00
AerofoxTech
5ca31ac1a1
hwdef: add AeroFox PMU module hwdef
2022-09-29 15:15:36 +10:00
Andrew Tridgell
124f7846c8
hwdef: reduced memory usage on MatekF405-CAN board
2022-09-28 07:16:39 +10:00
Andy Piper
a1960e7d07
AP_HAL_ChibiOS: make sure SkystarsH7HD has functioning VTX on Camera 1 by default
2022-09-27 09:29:43 +10:00
Andy Piper
64b31b3592
AP_HAL_ChibiOS: increase SPI clock for ICM42688 on CUAV-Nora
...
use regular speed for ICM42688 CS on Nora
2022-09-27 09:28:45 +10:00
Andy Piper
91eb72058a
AP_HAL_ChibiOS: hwdef for bdshot version of CUAV Nora/Nora+
2022-09-27 09:28:45 +10:00
bugobliterator
6e28839daa
AP_HAL_ChibiOS: remove unused Here devices
2022-09-27 08:48:48 +10:00
Andy Piper
e7b1bcbd75
AP_HAL_ChibiOS: put RX on UART1 on Skystars H7HD bdshot
...
make sure VTX has power on Skystars H7HD at boot
2022-09-26 08:00:04 +10:00
Andy Piper
63fb1a2540
AP_HAL_ChibiOS: hwdef for bdshot variant of SkystarsH7HD
...
Correct bootloader storage location for SkystarsH7HD
2022-09-26 08:00:04 +10:00
Andy Piper
4cfd1ee426
AP_HAL_ChibiOS: disable DMA on I2C on bdshot boards to free up DMA channels
2022-09-21 17:59:29 +10:00
Yuri
765cb4581c
AP_HAL_ChibiOS: define skyviper short board names
2022-09-21 17:56:42 +10:00
Yuri
02e2061661
AP_HAL_ChibiOS: define CubeOrange-SimOnHardWare short board name
2022-09-21 17:56:42 +10:00
Kirill Shilov
d48fc99c5f
hwdef: AIRLink: USART2 enabled in hwdef
2022-09-21 06:58:48 +10:00
Andy Piper
15dd2e6062
AP_HAL_ChibiOS: bdshot variant of MatekL431 Periph node
...
setup bdshot defaults for MatekL431
2022-09-20 09:45:03 +10:00
Peter Barker
4cc1459e63
AP_HAL_ChibiOS: disable CanManager in hwdef.h for AP_Periph
2022-09-20 09:39:48 +10:00
Peter Barker
28a0336423
AP_HAL_ChibiOS: move defaulting of HAL_DSHOT_ALARM into hwdef
2022-09-15 09:18:04 +10:00
Andrew Tridgell
178e683e02
hwdef: rename board at request of vendor
...
there are multiple AtomRCF405 boards
2022-09-14 19:39:49 +10:00
Andrew Tridgell
8e102ecfcc
hwdef: added CUAV_V6X default parameters
2022-09-14 18:04:46 +10:00
Iampete1
64d9413871
hwdef: Hitec-Airspeed: disable UART to save flash
2022-09-11 14:02:18 +10:00
Andrew Tridgell
a0530a4816
hwdef: fixed FlyingmoonF427 servo rail voltage
2022-09-11 08:29:12 +10:00
Andrew Tridgell
dd89d68107
hwdef: added AtomRC F405 board
2022-09-09 07:14:51 +10:00
Andy Piper
d82ba1b7a3
AP_HAL_ChibiOS: use faster SPI clock for BMI270 on MambaH743 and KakuteH7v2
2022-09-06 09:31:21 +10:00
AerofoxTech
b9b158216b
hwdef: add AeroFox Airspeed periph
2022-09-05 12:36:11 +10:00
Andrew Tridgell
f8b1169165
HAL_ChibiOS: rename ecc_raw to apsec_data
2022-09-05 12:35:37 +10:00
Andrew Tridgell
f899a47429
HAL_ChibiOS: removed debug msg
2022-09-05 12:35:37 +10:00
Andrew Tridgell
30ed94c73c
hwdef: disable UARTS in MatekL431 bootloader
...
this saves a lot of flash, and UARTs are not needed in the
bootloader. It means we can fit a bootloader with signing for ESC
based RemoteID support
2022-09-05 12:35:37 +10:00
Andrew Tridgell
d7710e5ccf
HAL_ChibiOS: make it easy to debug secure boot on Nucleo-G491
2022-08-31 10:14:25 +10:00
Andrew Tridgell
b808351f2a
hwdef: enable DFU on some boards
2022-08-30 10:51:06 +10:00
bugobliterator
eb116849c6
AP_HAL_ChibiOS: add LED Bootloader in CubeOrange and related boards
2022-08-30 10:51:06 +10:00
bugobliterator
0c78f8bac2
AP_HAL_ChibiOS: add support for booting into DFU
2022-08-30 10:51:06 +10:00
Henry Wurzburg
d420ba0edd
HWDEF: correct default params file and readme for SPR H7
2022-08-30 10:27:25 +10:00
Andy Piper
acb318fcab
AP_HAL_ChibiOS: rename KakuteH7Miniv2 to kakuteH7Mini-Nand
2022-08-30 09:52:41 +10:00
bugobliterator
c7ebd00ff9
AP_HAL_ChibiOS: disable RCIN and RCOUT threads on HiTec-Airspeed
2022-08-28 11:43:01 +10:00
Andy Piper
16b1a28cc9
AP_HAL_ChibiOS: bdshot version of MatekF405-Wing
2022-08-24 17:20:15 +10:00
Peter Barker
e4bc7a0ef5
AP_HAL_ChibiOS: rename HAL_MISSION_ENABLED to AP_MISSION_ENABLED
2022-08-18 22:49:10 +10:00
Peter Barker
9b1b06fd95
hwdef: remove ICEngine support from many boards
...
Ran out of room on omnibusf4pro-bdshot.
Removed ICEngine in the same place we were removing OpticalFlow
2022-08-17 17:40:21 +10:00
Peter Barker
dc8862822f
AP_HAL_ChibiOS: remove unused HAL_RCIN_PULSE_PPM_ONLY define
2022-08-17 17:39:15 +10:00
Peter Barker
4ca0f35943
AP_HAL_ChibiOS: do not gate AP_CRASHDUMP_ENABLED on bootloader
...
Also rename from HAL_CRASHDUMP_ENABLE
Removes code based on define rather than creating empty functions. Makes it clearer what's going on in the callers.
2022-08-17 17:34:00 +10:00
Peter Barker
59c6207a47
AP_HAL_ChibiOS: enable hardware debugging pins in SimOnHardware parameters
2022-08-16 09:39:03 +10:00
