Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
54,818 Commits 71 Branches 509 Tags 756 MiB
Commit Graph

279 Commits

Author SHA1 Message Date
Andrew Tridgell c2b79547c7 AP_BoardConfig: fixed BRD_SAFETY_MASK 
this was being omitted on most boards since we changed to
SERVOn_FUNCTION=-1 method for GPIO
 2022-10-07 08:27:21 +11:00
Andrew Tridgell 1488cd8002 AP_BoardConfig: load CUAVv6X defaults when detected 2022-10-04 13:38:30 +11:00
Iampete1 7a5ff6b51f AP_BoardConfig: params always use set method 2022-08-03 13:43:48 +01:00
Andrew Tridgell 9911fd76f4 AP_BoardConfig: allow for BMI088 for Holybro 6X 
and tighten check on CUAV-X6 and Holybro-6X to check all 3 IMUs
 2022-08-02 17:26:46 +10:00
Andrew Tridgell b50d405f91 AP_BoardConfig: added board detection for FMUv6 
support Holybro-6X and CUAV-6X for now, using IMU signatures
 2022-07-19 15:02:31 +10:00
Peter Barker 2c64922a14 AP_BoardConfig: use HAL_GCS_ENABLED in place of periph/example check 
... periphs can have GCS too...
 2022-07-17 09:33:11 +10:00
Peter Barker 336a6b0359 AP_BoardConfig: remove reference to CONFIG_ARCH_BOARD_* 
These are vestiges from when we ran both on ChibiOS and NuttX
 2022-06-28 11:21:30 +10:00
Andrew Tridgell 180c516b53 AP_BoardConfig: fixed build with logging disabled 
fixes CubeOrange-periph build
 2022-06-06 14:50:40 +10:00
Andrew Tridgell cf4768454f AP_BoardConfig: expose BRD_SAFETYENABLE on all boards 
default BRD_SAFETYENABLE to 0 on boards with no safety switch, which
gives us the same behaviour as before, but users can choose to enable
the safety

this fixes two problems:

  - CAN servos and ESCs work on boards with no safety switch
    (eg. MatekH743 with CAN)

  - during startup we could get spurious outputs before out aircraft
    type is setup
 2022-05-22 14:58:12 +10:00
Andrew Tridgell 7ed8e8d3b6 AP_BoardConfig: more changes for 32 bit servo mask 2022-05-22 12:07:37 +10:00
murata 234bb5409d AP_BoardConfig: Console output can be disabled 2022-05-17 09:53:06 +10:00
murata c6ea688d52 AP_BoardConfig: Increase the number of digits in the board serial number 
Co-authored-by: Joshua Henderson <hendjoshsr71@gmail.com>
 2022-05-17 09:08:43 +10:00
bugobliterator 8574afb2e1 AP_BoardConfig: add WHOAMI for INV42688 2022-03-20 07:23:10 -07:00
Andy Piper c01b1801c8 AP_BoardConfig: add options for write protecting bootloader and main flash 
add option to completely remove protection on flash banks
 2022-02-24 10:19:07 +11:00
Andrew Tridgell 3e1ffa3769 AP_BoardConfig: moved board dependent pieces from .h to .cpp 
improves ccache efficiency
 2022-02-23 12:36:59 +11:00
Andrew Tridgell 9383c43ab9 AP_BoardConfig: include hal.h 2022-02-22 12:13:19 +11:00
Andrew Tridgell 237e71b95f AP_BoardConfig: disable STLink debug pins by default 
this avoids leaving the debug pins in a state where they may be
vulnerable to ESD issues
 2021-12-28 10:31:25 +11:00
Peter Barker 6a13613a0f AP_BoardConfig: correct va_list memory over-read error 
A va_list can only be used once - so take a copy each time we want to
use it
 2021-11-23 11:46:09 +11:00
Andrew Tridgell e1c9da85b9 AP_BoardConfig: allow for heater polarity setting on FMU 2021-11-10 08:47:21 +11:00
Randy Mackay ad0a5aa260 AP_BoardConfig: rename TEMPMGN_LOW to HEAT_LOWMGN 
also these renames are included
BRD_IMU_TARGTEMP becomes BRD_HEAT_TARG
BRD_IMUHEAT_P/I/IJAX become BRD_HEAT_P/I/IMAX
 2021-11-09 08:02:57 +09:00
Iampete1 3f98927885 AP_BoardConfig: add min arming temp margin param and getter 2021-10-19 11:16:45 +11:00
Peter Barker 5b2eced5a2 AP_BoardConfig: factor substring from allocation_error parameter 2021-10-18 12:49:44 +11:00
Andrew Tridgell 8d9c9d9130 AP_BoardConfig: allow override of BRD_SAFETYENABLE default 2021-10-12 15:47:51 +11:00
Iampete1 0e0cc36f8f AP_BoardConfig: remove ALT_CONFIG param if no alt config is posible 2021-09-29 19:55:21 +10:00
bugobliterator 0de393bf7f AP_BoardConfig: add allocation failure handling loop 2021-09-22 21:36:34 +10:00
Iampete1 970d0ea2a3 AP_BoardConfig: make sure heater is left off if disabled 2021-08-31 10:32:25 +10:00
Peter Barker 815f7017d4 AP_BoardConfig: remove definitions of BOARD_PWM_COUNT_DEFAULT 
No longer used
 2021-08-20 10:51:19 +10:00
Andrew Tridgell 730f5cc7e8 AP_BoardConfig: mark logger Write() calls as streaming where appropriate 2021-08-18 10:20:03 +10:00
Andrew Tridgell fdd294b0f3 AP_BoardConfig: replaced Pixhawk with more appropriate wording in docs 2021-07-22 07:48:12 +10:00
Andrew Tridgell 0f70b4d8e3 AP_BoardConfig: removed BRD_PWM_COUNT 2021-07-22 07:48:12 +10:00
Peter Barker 955ea710b8 AP_BoardConfig: remove @Values from param metadata where @Bitmask exists 2021-06-23 18:37:34 +10:00
Randy Mackay 3f77c52720 AP_BoardConfig: minor change to BRD_IMU_TARGTEMP param desc 
Users should reboot if the param is changed to -1 because the heater pin could be left on
 2021-06-02 18:17:59 +10:00
Andrew Tridgell c2a13213ae AP_BoardConfig: allow for hwdef.dat setting for IMU heater gains 2021-06-01 08:07:49 +10:00
Andrew Tridgell 1097d04e5d AP_BoardConfig: added get_heater_duty_cycle() 2021-02-09 11:32:19 +11:00
Patrick José Pereira 3fcf430a2c AP_BoardConfig: Add missing const in member functions 
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
 2021-02-03 18:45:14 +11:00
Andrew Tridgell 0f5a75f5b9 AP_BoardConfig: convert to using hal.serial() instead of hal.uartX 2020-12-15 10:32:46 +11:00
Andrew Tridgell f543c483fc AP_BoardConfig: added BRD_OPTIONS flag for setting of internal parameters 
this allows us to make parameters read-only for normal use, but for
special developer requirements the user can unlock the parameters at
their own risk
 2020-12-08 13:22:17 +11:00
Andrew Tridgell 8c959c4e13 AP_BoardConfig: added an EXPECT_DELAY_MS to config_error 
this prevents a config_error called after setup() has complete from
causing a watchdog. That is a bit more friendly
 2020-11-26 17:06:13 +09:00
Hwurzburg 6fe5ed36ce AP_BoardConfig: add Board option to disable MAVftp in low mem bds/apps 2020-11-17 10:41:59 +11:00
Tom Pittenger 3cf537deed AP_BoardConfig: reorder the fixed-index enum 2020-11-14 08:38:24 +11:00
Andrew Tridgell f121c250ae AP_BoardConfig: allow replay on ChibiOS 2020-11-10 16:15:45 +11:00
Mark Whitehorn 30a9bb4ff4 AP_BoardConfig: change message interval to 5 seconds to match scheduler_delay_callback 2020-11-05 15:04:10 +11:00
Andrew Tridgell 45af37298b AP_BoardConfig: use AP_Filesystem for sdcard mount 2020-10-27 10:45:03 +11:00
Harsh Pandey c2744396cc AP_BoardConfig: Update BRD_TYPE parameter description for recent boards. 2020-10-14 07:53:22 +11:00
Andrew Tridgell 11b3c622dd AP_BoardConfig: allow more serial ports to have flow control 2020-10-03 20:22:56 +10:00
Andrew Tridgell 174dc3b032 AP_BoardConfig: disable watchdog in examples 
not a lot of use in example code
 2020-09-26 11:47:46 +10:00
bugobliterator b390f402b7 AP_BoardConfig: do bank selection when checking Invensensev2 Sensors 2020-09-16 18:08:08 +10:00
Siddharth Purohit ad2a63e173 AP_BoardConfig: remove CAN management from BoardConfig 2020-08-19 17:31:09 +10:00
Andrew Tridgell 4b047625fc AP_BoardConfig: use polarity for 3.3/5v selection 2020-07-21 08:47:27 +10:00
murata 91101aac01 AP_BoardConfig: Define a method class 
AP_BoardConfig: Define a method class
 2020-06-30 09:21:16 +10:00