Iampete1
4ac9eb9509
Plane: set_servos_controlled: rework throttle output
2023-12-05 11:00:55 +11:00
Iampete1
41f61da0d9
Plane: Quadplane: add `get_throttle_input` method that behaves the same as Plane::get_throttle_input did
2023-11-29 18:15:01 +11:00
Iampete1
483ef18087
Plane: ignore invalid pilot throttle
2023-11-29 18:15:01 +11:00
Tom Pittenger
d1b2c6e564
Plane: set nav_controller stale on mode change
2023-11-28 10:27:19 +11:00
Tom Pittenger
0e9f9920bc
Plane: mode LoiterAltQLand to reuse loiter point if available
2023-11-28 10:27:19 +11:00
Randy Mackay
93a2e728da
Plane: SYSID_MYGCS param increment
2023-11-28 07:54:45 +09:00
Tom Pittenger
b468af81ac
Plane: wrap Watt Limiiter in #if AP_BATTERY_WATT_MAX_ENABLED
2023-11-26 11:57:14 +11:00
Andy Piper
60d5e65a1d
Plane: DFF logging docs
2023-11-21 13:26:23 +11:00
Andy Piper
0d10f74bf7
Plane: update PID notch centers at 1Hz with average loop rate
2023-11-21 13:26:23 +11:00
Peter Barker
ba8e770a81
ArduPlane: stop streaming trying SIM_STATE messages outside sim
2023-11-20 19:25:25 +11:00
Peter Barker
ec5fa8bd62
ArduPlane: tidy sending of esc telem generator messages
2023-11-20 19:25:25 +11:00
Peter Barker
e1e1fae604
ArduPlane: tidy sending of queued mcu status messages
2023-11-20 19:25:25 +11:00
Peter Barker
803a56a6b4
ArduPlane: tidy sending of queued opticalflow messages
2023-11-20 19:25:25 +11:00
Peter Barker
4f76a6ec65
ArduPlane: tidy sending of queued mount messages
2023-11-20 19:25:25 +11:00
Peter Barker
4b285fa579
ArduPlane: add and use AP_MAVLINK_COMMAND_LONG_ENABLED
2023-11-16 10:50:21 +11:00
Peter Barker
e0eacdc197
ArduPlane: handle DO_SET_MISSION_CURRENT as both long and int
2023-11-16 10:50:21 +11:00
Andrew Tridgell
74c9520449
Plane: update release notes for 4.4.3
2023-11-14 12:52:09 +11:00
Andrew Tridgell
a318ef333d
Plane: release notes for 4.4.3-beta1
2023-11-07 11:20:37 +11:00
Henry Wurzburg
73f58d3624
ArduPlane: expand explanations in FWD THR docs
2023-11-07 10:57:04 +11:00
Iampete1
55040175e6
Plane: Cruise: only lock in heading once moving forwards
2023-11-04 19:07:55 +11:00
Iampete1
5087a4262d
Plane: set_servos_idle: output left and right throttles
2023-10-31 14:06:22 +11:00
Iampete1
8061b1b4c2
Plane: move set_servos_idle functionality to ModeAuto
2023-10-31 14:06:22 +11:00
Iampete1
7e4b5b0c97
Plane: rework set_servos_controlled function
2023-10-31 11:18:19 +11:00
Iampete1
a6206bde3c
Plane: move to new `using_airspeed_sensor` ahrs method
2023-10-31 10:39:21 +11:00
Peter Barker
c91968017b
ArduPlane: tidy use of GPS mavlink defines
2023-10-27 14:16:47 +11:00
Peter Barker
628bc02bf1
ArduPlane: save bytes when AP_AIS_ENABLED is false
2023-10-27 14:16:47 +11:00
Peter Barker
7961eb6045
Plane: consider nan as zero in DO_REPOSITION
...
QGC's interfaces want to send nan for these parameters
2023-10-27 14:16:07 +11:00
Peter Barker
edb4f25953
ArduPlane: remove MSG_BATTERY_STATUS from steams if AP_BATTERY_ENABLED is false
2023-10-26 13:23:57 +11:00
Michael du Breuil
28d4603a46
Plane: Support not sending a status text on state change
2023-10-25 09:39:51 -07:00
Paweł Rozenblut
1c6b4debe2
Plane: send attitude target message implementation (for quadplanes)
...
Minor modification - implementation of the send_attitude_target msg. streaming (for quadplanes). The code is analogous in its structure and functionality to the implementation in Copter
Co-Authored-By: Peter Hall <33176108+IamPete1@users.noreply.github.com>
2023-10-25 09:53:13 +11:00
Michael du Breuil
b630efd4db
ArduPlane: Pass the 4th parameter to ICE for engine start
2023-10-24 14:11:39 -07:00
Peter Barker
a97adcf9cd
ArduPlane: handle MAV_CMD_NAV_TAKEOFF via command_long and command_in
2023-10-24 12:59:19 +11:00
Andrew Tridgell
63de33bce9
Plane: update release notes for 4.4.2
2023-10-23 07:38:33 +11:00
Peter Barker
aa78f53498
Plane: use origin-relative altitudes rather than home-relative
2023-10-18 19:49:06 +11:00
Henry Wurzburg
410fbb998b
Plane:reset in landing seq on mode change while disarmed
2023-10-18 13:37:55 +11:00
Henry Wurzburg
a26ee15216
Plane:force min transition timer to 2 sec
2023-10-17 14:32:24 +11:00
Peter Barker
c990b0105e
ArduPlane: accept LOITER_UNLIM and RETURN_TO_LAUNCH as command_int
2023-10-17 12:58:57 +11:00
Randy Mackay
6bd7c37039
Plane: 4.4.2-beta1 release notes
2023-10-14 11:24:37 +11:00
Andrew Tridgell
c980e0488e
Plane: fixed terrain RTL with rally points
...
this fixes a bug where if the terrain database cache does not have the
tile for the location of a rally point then RTL to the rally point
with TERRAIN_FOLLOW=1 will not track terrain
The underlying issue is that Location::loc.change_alt_frame() will
return false if the location is not in the terrain memory cache. We
can't just extrapolate as the rally point could be in a totally
different terrain area to the current location. So instead we set it
as terrain_following_pending and fix it as soon as the terrain cache
is filled.
fixes https://github.com/ArduPilot/ardupilot/issues/25157
2023-10-14 10:46:00 +11:00
Mykhailo Kuznietsov
b7c040e8bc
ArduPlane: Fix some typos
...
Fixed some typos found in the code.
2023-10-12 18:30:42 +11:00
Peter Barker
e13566695b
ArduPlane: allow for compilation without AP_RTC_ENABLED
2023-10-11 19:17:27 +11:00
Peter Barker
2e494d496b
ArduPlane: allow Plane to run MAV_CMD_MISSION_START as long and int
2023-10-11 19:05:56 +11:00
Henry Wurzburg
7c46585bac
ArduPlane: add airspeed estimate status logging
2023-10-10 08:11:10 +09:00
Peter Barker
be3f292ba4
ArduPlane: don't send fence_status mavlink message if fence not compiled in
2023-10-04 19:13:23 +11:00
Peter Barker
e965b987f6
Plane: accept MAV_CMD_DO_LAND_START as both command_long and COMMAND_INT
2023-10-04 19:04:25 +11:00
Iampete1
9381e2f411
Plane: GuidedHeading PID: remove slew limit
2023-10-03 11:28:18 +11:00
Iampete1
73db3c3823
Plane: MAV_CMD_GUIDED_CHANGE_HEADING: allow changing heading type or rate for same heading
2023-10-03 11:28:18 +11:00
Iampete1
e9fbf6db24
Plane: fix guided heading control anti windup
2023-10-03 11:28:18 +11:00
Peter Barker
af3992d795
Plane: handle DO_GO_AROUND as both COMMAND_LONG and COMMAND_INT
2023-09-27 17:37:55 +10:00
Andrew Tridgell
babdb3625a
Plane: moved assign tilt to the run() function
...
this prevents double calling and fixes qhover
2023-09-27 11:43:45 +10:00
Paul Riseborough
2f0bbf14a4
Plane: fix metadata units for Q_FWD_PIT_LIM
2023-09-27 11:43:45 +10:00
Paul Riseborough
3866f2b4b5
Plane: Rework pitch limiting in QuadPlane::assign_tilt_to_fwd_thr
...
Don't unnecessarily increase the forward pitch limit when position control forward action is saturated.
2023-09-27 11:43:45 +10:00
Paul Riseborough
acf8dbaeee
Plane: Add diagnostics logging to QuadPlane::assign_tilt_to_fwd_thr
2023-09-27 11:43:45 +10:00
Paul Riseborough
fa5aef050c
Plane: Restructure throttle scaling and pitch limiting to enable logging
2023-09-27 11:43:45 +10:00
Paul Riseborough
fb7c383946
Plane: Prevent quadplane.assign_tilt_to_fwd_thr() being called twice
2023-09-27 11:43:45 +10:00
Paul Riseborough
c2d6db13ec
Plane: explicitly type cast pitch limit
2023-09-27 11:43:45 +10:00
Paul Riseborough
90eacaeb88
Plane: fix centi-degree scaling bug
2023-09-27 11:43:45 +10:00
Paul Riseborough
da595bbf88
Plane: Add protection for failed quadplane forward thrust motor
2023-09-27 11:43:45 +10:00
Andrew Tridgell
e3ce7d966b
Plane: fixes from review
2023-09-27 11:43:45 +10:00
Andrew Tridgell
573de2fc17
Plane: implement methods for aux switch control of vfwd code
...
and use a common function for the active method
2023-09-27 11:43:45 +10:00
Paul Riseborough
4993dcb814
Plane: Remove duplicated parameter check
2023-09-27 11:43:45 +10:00
Paul Riseborough
f834d4730b
Plane: Add Q_FWD_THR_GAIN to table of transmitter tuning parameters
2023-09-27 11:43:45 +10:00
Paul Riseborough
6ad7588857
Plane: Add arming check for incompatible Q_VFWD_GAIN and Q_FWD_THR_USE
2023-09-27 11:43:45 +10:00
Paul Riseborough
daea00168b
Plane: Use Q_FWD_THR_USE parameter to control modes that use Q_FWD_THR_GAIN
2023-09-27 11:43:45 +10:00
Paul Riseborough
ed91d428e1
Plane: Default Q_FWD_THR_GAIN to 0 and update meta data
2023-09-27 11:43:45 +10:00
Paul Riseborough
7bbd0ed74e
Plane: prevent wind up of Q-mode velocity controller I term
2023-09-27 11:43:45 +10:00
Paul Riseborough
b3a1807349
Plane: Fix use of q_fwd_nav_pitch_lim_cd class variable
2023-09-27 11:43:45 +10:00
Paul Riseborough
16895003df
Plane: if statement cleanup in QuadPlane::assign_tilt_to_fwd_thr
2023-09-27 11:43:45 +10:00
Paul Riseborough
57cfe854b2
Plane: Add Q_FWD_THR_GAIN value arming check for tailsitters
2023-09-27 11:43:45 +10:00
Paul Riseborough
04e5f6b5f6
Plane: use forward tilt instead of forward throttle when close to ground
2023-09-27 11:43:45 +10:00
Paul Riseborough
8988de3c7c
Plane: Allow non positive values of Q_FWD_PIT_LIM to be used
2023-09-27 11:43:45 +10:00
Paul Riseborough
e866998b21
Plane: Rename q_fwd_tilt_lim to q_fwd_pitch_lim
2023-09-27 11:43:45 +10:00
Paul Riseborough
c15bb3f1e3
Plane: remove code that can never run
2023-09-27 11:43:45 +10:00
Paul Riseborough
98220c7315
Plane: Handle reset of q_fwd_throttle in QuadPlane::mode_enter(void)
2023-09-27 11:43:45 +10:00
Paul Riseborough
2d3431a1ac
Plane: Improve use of forward flight motors and tilting rotors in Q modes
2023-09-27 11:43:45 +10:00
Peter Barker
93da99bea2
Plane: adjust for a lack of DCM
2023-09-27 08:00:54 +10:00
Andrew Tridgell
2b2d4b8087
Plane: release notes for 4.4.1
2023-09-26 13:26:01 +10:00
Peter Barker
c726dec834
ArduPlane: remove COMPASS_CAL messages from streamrates if tumble cal disabled
...
fatal error in SITL if we try to send messages with these disabled
2023-09-26 11:39:50 +10:00
Peter Barker
11ffb059ae
Plane: accept MAV_CMD_DO_AUTOTUNE_ENABLE as both long and int
2023-09-26 11:36:57 +10:00
Iampete1
665ba38cdb
Plane: update PID logger documentation
2023-09-26 10:41:05 +10:00
Henry Wurzburg
f5beb4772d
ArduPlane: correct/expand param metadata re synth airspeed
2023-09-26 09:04:51 +10:00
Henry Wurzburg
97f4f99a89
Plane:clarify CTUN.SAs message meaning
2023-09-26 09:03:35 +10:00
Peter Barker
fbb0601408
Plane: use AP_TUNING_ENABLED
2023-09-21 07:07:58 +10:00
Peter Barker
fc722b5efc
AP_Tuning: add and use AP_TUNING_ENABLED
2023-09-21 07:07:58 +10:00
Peter Barker
63c88fea58
Plane: handle DO_PARACHUTE as both COMMAND_LONG and COMMAND_INT
2023-09-20 17:37:59 +10:00
Peter Barker
06f1ac07bc
Plane: accept motor test as both command long and command int
2023-09-19 20:31:03 +10:00
Iampete1
fa1c5f62aa
Plane: Tailsitter: use motor I term for pitch in assist if not surfaces are setup
2023-09-19 09:35:19 +10:00
Randy Mackay
1572520913
Plane: 4.4.1-beta2 release notes
2023-09-14 17:18:47 +10:00
Peter Barker
ee316f04ed
Plane: allow DO_VTOL_TRANSITION as both LONG and INT commands
2023-09-13 21:25:14 +10:00
Peter Barker
a1b021e833
Plane: move nav_delay state to be private in ModeAuto
2023-09-13 18:08:10 +10:00
Andy Piper
f25e67e3eb
Plane: add option to scale FF in VTOL modes based on ratio of angle gains
2023-09-13 18:02:44 +10:00
Peter Barker
c1b5e9a446
ArduPlane: support preflight calibration via command_int
2023-09-13 17:24:07 +10:00
Peter Barker
445f1fa272
Plane: handle DO_CHANGE_SPEED as COMMAND_INT
2023-09-12 09:22:36 +10:00
Ep Pravitra
9700e65d19
AP_AdvancedFailsafe: option to automatically set mode to auto when datalink is loss
...
When enabled, it ensures vehicle enters AUTO even if it is currently in other autonomous modes (for example Guided)
2023-09-12 09:09:39 +10:00
Henry Wurzburg
e1d91e3007
Plane:add taildrag holdown to TAKEOFF mode
2023-09-11 09:16:02 +10:00
Andrew Tridgell
94201f12c6
Plane: use deadzone in stick mixing
...
this prevents small RC input deviations from impacting non-pilot
controlled modes via stick mixing
2023-09-10 12:25:40 +10:00
Henry Wurzburg
ed21c49975
Plane:correct TKOFF_DIST metadata
2023-09-07 00:49:58 -07:00
Andrew Tridgell
68896c6a50
Plane: release notes for 4.4.1-beta1
2023-09-05 20:16:02 +10:00
Andrew Tridgell
9d98244730
Plane: fixed nav_roll/nav_pitch when waiting for VTOL takeoff
...
the nav_roll_cd and nav_pitch_cd were not being set in the VTOL
takeoff code when disarmed. This led to small increments accumulating
in the stick mixing code, leading to large control surface movements
before arming
2023-09-03 09:51:24 +10:00
Peter Barker
4103d5cdb9
Plane: accept DO_ENGINE_CONTROL as both COMMAND_LONG and COMMAND_INT
2023-08-29 11:48:24 +10:00