Commit Graph

527 Commits

Author SHA1 Message Date
Andrew Tridgell 46f35a6910 AP_Baro: work around bad WHOAMI read on DPS310
this fixes an issue with bad read of WHOAMI on a mRoPixracerPro. We
don't know how the sensor gets in a state where WHOAMI can't be read,
but toggling CS does fix it
2021-03-31 13:26:52 +11:00
zhouzhiwen2000 afde83d2f9 AP_Baro: Fix occasional problems with SPL06
Sometimes SPL06 has init problems, that's due to failure of reading using SPI for the first time. The SPL06 is a dual protocol sensor(I2C and SPI), sometimes it takes one SPI operation to convert it to SPI mode.
2021-03-24 14:29:30 +11:00
Pierre Kancir ce34ce6def AP_Baro: fix example 2021-03-03 18:07:38 +11:00
Pierre Kancir 95d0c67a99 AP_Baro: fix example 2021-03-03 18:07:38 +11:00
Andrew Tridgell a42bfd5df5 AP_Baro: added MS5611 baro compensation for -15 to -40C 2021-02-16 11:20:57 +11:00
Andrew Tridgell dad55b496b AP_Baro: support DPS310 temperature fix
separate DPS310 from DSP280
2021-02-09 11:37:07 +11:00
Patrick José Pereira 6a824b1467 AP_Baro: Add missing const in member functions
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2021-02-03 18:45:14 +11:00
Josh Henderson 275c2849cf AP_Baro: Privatize Logging 2021-02-02 17:55:27 +11:00
Andrew Tridgell 75c789fc57 AP_Baro: added ExternalAHRS backend 2021-01-05 21:13:12 +11:00
Andrew Tridgell 3e2ff71750 AP_Baro: rename params to suit new BARO param naming 2020-12-11 15:21:41 +11:00
Andrew Tridgell 567de3047b AP_Baro: added modelling of baro wind effects in SITL 2020-12-11 15:21:41 +11:00
Andrew Tridgell e552fd7e5a AP_Baro: adjust for new baro params in SITL 2020-12-11 15:21:41 +11:00
Andrew Tridgell 9563c1ed33 AP_Baro: rename wind coefficient params to be clearer 2020-12-11 15:21:41 +11:00
Andrew Tridgell 1c1c067dee AP_Baro: rework to separate out wind coefficient params
- disable on low flash boards
 - add an enable parameter per baro for wind coeffients
2020-12-11 15:21:41 +11:00
Paul Riseborough 0be0498801 AP_Baro: Add static pressure positoin error correction 2020-12-11 15:21:41 +11:00
Andrew Tridgell d099af87b2 AP_Baro: renamed parameters and mark pressure and temperature readonly
this is ready for BARO parameter prefix
2020-12-08 13:22:17 +11:00
Peter Barker 6f7fbece49 AP_Baro: add accessor for external bus parameter 2020-12-04 16:37:10 +11:00
Peter Barker 771666ee52 AP_Baro: correct i2c transfer invocation in KellerLD
This allows the device to work on boards which are not Pixhawk1.  For
reasons yet to be determined.
2020-12-04 16:37:10 +11:00
Andrew Tridgell b0ec4f8b93 AP_Baro: removed have_ekf_logging() 2020-11-10 16:15:45 +11:00
murata 22b8ed5adf AP_Baro: Delete unnecessary return processing 2020-10-27 10:48:52 +11:00
murata 967aa44fbe AP_Baro: Change message from AP_Baro to Baro for unification accross the file 2020-10-08 10:51:33 +11:00
giacomo892 9c42c0f176 AP_Baro: remove unnecessary debug on DPS280 2020-09-25 08:19:29 +10:00
Kai Schoos 798c3fd0b7 AP_Baro: examples: BARO_generic: instantiate sitl to fix nullptr panic 2020-09-22 14:56:59 +10:00
Andrew Tridgell 7daf8d3cd4 AP_Baro: fixed build warnings for MSP with AP_Periph 2020-09-15 09:40:03 +10:00
yaapu ea53ce2a3f AP_Baro: support for MSP barometer 2020-09-09 06:35:50 +10:00
Harshit Kumar Sankhla d7c569c085 AP_Baro: able to freeze baro using SITL parameter 2020-08-27 20:20:51 +10:00
Andrew Tridgell 326ab0d7b8 AP_Baro: added get_primary() method 2020-08-27 20:20:51 +10:00
Siddharth Purohit dc02322017 AP_Baro: move to using CANManager library 2020-08-19 17:31:09 +10:00
Patrick José Pereira e1b6ef3e14 AP_BARO: Fix zero as nullptr in KellerLD
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2020-08-09 10:12:16 +10:00
Andrew Tridgell 978a7d2859 AP_Baro: added device IDs for barometers
this allows us to tell what barometers were detected in logs
2020-07-21 08:20:01 +09:00
Harshit Kumar Sankhla 27fc7dcf0a AP_Baro: get SITL to work with multiple baros
baro readings are independent of each other
and can be configured to behave differently
2020-07-08 16:25:31 +10:00
vierfuffzig 6fa7dca68b AP-Baro: fix init without baro 2020-05-26 10:04:22 +10:00
Peter Barker 6b232ee515 AP_Baro: add documentation for ICBM message (ICM20789 diagnostics) 2020-04-26 09:02:39 +10:00
Andrew Tridgell 02aebfcd6f AP_Baro: fixed build warning 2020-04-20 07:10:21 +10:00
Patrick José Pereira 4018a79f83 AP_Baro: Fix scope of HAL_INS_MPU60x0_NAME
`read_calibration_data` is defined but only used inside the
definition scope.

Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2020-04-17 15:58:38 +10:00
murata 10b7988092 AP_Baro: Fix timestamp wrapping 2020-04-14 07:30:58 +10:00
Andrew Tridgell 322bad3fd9 AP_Baro: make all semaphores recursive
the cost is very similar and this prevents an easy coding error which
can occur on less used code paths
2020-01-19 20:19:30 +11:00
Andrew Tridgell 8c563ef1bf AP_Baro: use take_blocking instead of HAL_SEMAPHORE_BLOCK_FOREVER
this makes for cleaner and smaller code as the failure case is not
needed
2020-01-19 20:19:30 +11:00
Andrew Tridgell 4d24aa43db AP_Baro: added dummy driver
useful for board bringup
2020-01-18 17:00:44 +11:00
Andrew Tridgell d8beb55e9f AP_Baro: fixed BMP388 on SPI 2020-01-18 17:00:44 +11:00
Andrew Tridgell 8e4138b503 AP_Baro: fixed baro health for AP_Periph 2020-01-18 15:44:17 +11:00
Patrick José Pereira d36157f314 AP_Baro: Add BME280 ID in BMP280
BME280 has the same memory layout than BMP280,
but with more features.

Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2020-01-16 08:01:54 +11:00
Peter Barker 4e40c39128 AP_Baro: add missing break statement 2020-01-15 13:55:42 +11:00
CUAVcaijie 8daa8f34c9 AP_Baro: added averaging of CAN baro output 2019-12-26 12:21:41 +11:00
Michel Pastor 0857cf49d5 AP_Baro: add driver for the SPL06-001 2019-11-24 16:47:31 -08:00
Michel Pastor ada1239012 AP_Baro: fix PROBE_EXT parameter description 2019-11-18 08:23:33 +08:00
Mark Whitehorn a1868b8b67 AP_Baro: rename sensor_config_error to config_error 2019-11-08 10:14:34 +11:00
murata 233fb94417 AP_Baro: Add I2C Access 2019-10-27 20:02:27 +11:00
Andrew Tridgell 94418ca70e AP_Baro: added register checking and reset to DPS280 driver
this is to fix an issue found on a mRoControlZeroF7
2019-10-15 10:22:15 +11:00
Peter Barker 04ee459e8c AP_Baro: exclude Sub pressure transducers from non-sub builds 2019-09-28 16:41:06 +10:00