Mark Whitehorn
960e217e79
AP_HAL_Chibios: fix latent bug in ToneAlarm
2018-04-10 21:48:16 +10:00
Andrew Tridgell
f2df171fdd
HAL_ChibiOS: fixed DSM input on fmuv4
2018-04-10 17:22:21 +10:00
Andrew Tridgell
96cc657bd0
HAL_ChibiOS: fixed GPIO interrupt port mapping
2018-04-09 15:32:04 +10:00
Andrew Tridgell
b4aeffbaed
HAL_ChibiOS: added power status flags reporting
2018-04-09 15:32:04 +10:00
Andrew Tridgell
7c85d06600
HAL_ChibiOS: setup pwm counts, and cleanup mindpx-v2 PWM lines
2018-04-09 15:32:04 +10:00
Andrew Tridgell
1b9cebc3f2
HAL_ChibiOS: check pwm count in rcout init
2018-04-09 15:32:04 +10:00
Andrew Tridgell
68293c9c11
HAL_ChibiOS: don't require GPIO() markers on PWM outputs
...
this fixes blheli pass-thru on MindPX-v2
2018-04-09 15:32:04 +10:00
Andrew Tridgell
eb6c852ee3
HAL_ChibiOS: use simpler pullup on serial input
...
this maps to the right bits for each MCU type
2018-04-07 09:10:29 +10:00
Andrew Tridgell
71cd58cc7e
HAL_ChibiOS: run rc serial thread at top priority
...
this maximises reliability for serial IO to ESCs, increasing flashing
reliability
2018-04-07 09:10:29 +10:00
Andrew Tridgell
3cd4f2a002
AP_ChibiOS: handle oneshot125 separately
...
this sets up oneshot125 with the full 1000 steps of throttle
resolution, using a 8MHz clock. This matches the behaviour of modern
ESCs that measure PWM values with high accuracy
2018-04-07 09:10:29 +10:00
Andrew Tridgell
67993d6e5c
HAL_ChibiOS: re-instate priority boost system
...
this adds back in the priority boost system for the main thread when
waiting for a IMU sample. This significantly improves scheduling
performance on very busy boards like a PH2.1
2018-04-07 09:10:29 +10:00
Andrew Tridgell
2c6e6e3b13
HAL_ChibiOS: removed obsolete DShot example code
2018-04-07 09:10:29 +10:00
Andrew Tridgell
9b22e0b7cc
HAL_ChibiOS: fixed SPI rates on fmuv3
...
this fixes a SPI bandwidth issue on PH2.1 with 3 IMUs active
2018-04-07 09:10:29 +10:00
Andrew Tridgell
8e59f6aad6
HAL_ChibiOS: implement get_esc_scaling()
2018-04-07 09:10:29 +10:00
Andrew Tridgell
a2eec97325
HAL_ChibiOS: raised default SPI priority
...
this was causing transfer errors on the primary IMU of a PH2.1 when
fast sampling was enabled
2018-04-07 09:10:29 +10:00
Andrew Tridgell
5bfc97f9c0
HAL_ChibiOS: fixed dshot trigger while serial active
2018-04-07 09:10:29 +10:00
Andrew Tridgell
e448b5d069
HAL_ChibiOS: implement UART port locking
2018-04-07 09:10:29 +10:00
Andrew Tridgell
6fd0af11ef
HAL_ChibiOS: implement telem request API
2018-04-07 09:10:29 +10:00
Andrew Tridgell
751c3a554a
HAL_ChibiOS: added fmuv4-beta hardware definition
...
for an old pixracer quad I have (and I believe Peter has one too)
2018-04-07 09:10:29 +10:00
Andrew Tridgell
6bdb523630
HAL_ChibiOS: guarantee 1kHz output for DShot
2018-04-07 09:10:29 +10:00
Andrew Tridgell
692f22c17f
HAL_ChibiOS: added GPIO assignments for revo-mini
2018-04-07 09:10:29 +10:00
Andrew Tridgell
ef539d4145
HAL_ChibiOS: added debug timing option for RCOut
2018-04-07 09:10:29 +10:00
Andrew Tridgell
af1e3aa64d
HAL_ChibiOS: increase timeout on bytes for blheli
2018-04-07 09:10:29 +10:00
Andrew Tridgell
756c0d4b0b
HAL_ChibiOS: fixed reset for oneshot
...
after a BLHeli connection we need to go back to 1Hz on timer
2018-04-07 09:10:29 +10:00
Andrew Tridgell
9a29c6d3b5
HAL_ChibiOS: implement DigitalSource()
2018-04-07 09:10:29 +10:00
Andrew Tridgell
51c40a013b
HAL_ChibiOS: added IRQ save/restore to hal.scheduler
...
these are used by RPM driver
2018-04-07 09:10:29 +10:00
Andrew Tridgell
019049e76b
HAL_ChibiOS: fixed RC period setting
2018-04-07 09:10:29 +10:00
Andrew Tridgell
d258eac88d
HAL_ChibiOS: fixed reconfig of group after serial_end()
2018-04-07 09:10:29 +10:00
Andrew Tridgell
46c76c3d5d
HAL_ChibiOS: increase serial byte timeout
...
needs 2ms for final ack in verify
2018-04-07 09:10:29 +10:00
Andrew Tridgell
202a7dd091
HAL_ChibiOS: don't allow dshot while serial active
2018-04-07 09:10:29 +10:00
Andrew Tridgell
b350b07593
HAL_ChibiOS: allow internal GPIO fuctions to use disabled pins
2018-04-07 09:10:29 +10:00
Andrew Tridgell
67bae2669b
HAL_ChibiOS: enable serial5 on fmuv3
2018-04-07 09:10:29 +10:00
Andrew Tridgell
382772d999
HAL_ChibiOS: initial support for ESC serial output
2018-04-07 09:10:29 +10:00
Andrew Tridgell
26d279e165
HAL_ChibiOS: improve DShot timing accuracy
2018-04-07 09:10:29 +10:00
Andrew Tridgell
93111dc0b1
HAL_ChibiOS: ensure that IO UART gets DMA
2018-04-07 09:10:29 +10:00
Andrew Tridgell
95a261e061
HAL_ChibiOS: don't generate DMA channels for ALARM pin
2018-04-07 09:10:29 +10:00
Andrew Tridgell
01e9c55721
HAL_ChibiOS: fixed SPI bus speed on SPI3
...
and add optional bootup test of SPI bus speeds to help with porting to
new MCUs
2018-04-07 09:10:29 +10:00
Andrew Tridgell
610a6a6c88
HAL_ChibiOS: optimise USB config driver
2018-04-07 09:10:29 +10:00
Andrew Tridgell
bc32276966
HAL_ChibiOS: support DShot output
...
use DMAR burst DMA to minimise number of DMA channels needed
thanks to betaflight for the great reference implementation!
2018-04-07 09:10:29 +10:00
Andrew Tridgell
294aac6955
HAL_ChibiOS: fixed CTS pulldown
...
we need to pulldown to prevent delays in uart sends
2018-04-07 09:10:29 +10:00
Andrew Tridgell
a64819cbf2
HAL_ChibiOS: minimise DMA TX latency on contended UARTs
...
try to prevent long delays on other users of a DMA channel
2018-04-07 09:10:29 +10:00
Andrew Tridgell
a86e85c6b2
HAL_ChibiOS: enable checking for DMA contention
2018-04-07 09:10:29 +10:00
Andrew Tridgell
64278f07d3
HAL_ChibiOS: removed the DMA channels from RCIN in hwdef.dat
...
no longer needed as this is automatic now
2018-04-07 09:10:29 +10:00
Andrew Tridgell
9a5df6d1f7
HAL_ChibiOS: auto-generate DMA channels for RCIN
...
and add DMA channels for TIMx_UP ready for DMAR based DShot support
2018-04-07 09:10:29 +10:00
Andrew Tridgell
6aff7ecbf5
HAL_ChibiOS: added channel numbers for STM32F4xx MCUs
2018-04-07 09:10:29 +10:00
Andrew Tridgell
da2e79130b
HAL_ChibiOS: generate channel numbers in DMA tables
2018-04-07 09:10:29 +10:00
Andrew Tridgell
3501763f4e
HAL_ChibiOS: added DShot example app
2018-04-07 09:10:29 +10:00
Tom Pittenger
b864cd6ae6
AP_HAL_ChibiOS: include correct wrappers
2018-04-03 08:27:44 +10:00
Andrew Tridgell
c311599e0a
HAL_ChibiOS: make DEFAULT_PARAMETERS relative to source root
2018-03-24 16:12:10 +11:00
kozinalexey
5df2b1a3ac
chibios hal config for F4BY
2018-03-24 06:39:09 +11:00