Tom Pittenger
cb20325593
AP_Mission: added flight stage FLIGHT_LAND_ABORT
...
- add get_prev_nav_cmd_with_wp_index(). This is different than get_prev_nav_cmd_index() in that it only stores the index if there is a valid lat/lng (+1 squashed commits)
- added mission item command to NAV_LAND which is the abort takeoff altitude. If 0 then use last takeoff if available, else use 50m
2015-09-09 09:04:24 +10:00
Tom Pittenger
1026e7df45
AP_Mission: updated comment
...
altitude and lat/lng are all used
2015-09-08 17:05:54 +10:00
Tom Pittenger
15b242832e
AP_Mission: lat/lng == 0 bug fix
...
was using wrong logic to check for lat/lng == 0
2015-08-29 21:17:35 +10:00
Tom Pittenger
41508457e1
AP_Mission: add get_prev_nav_cmd_with_wp_index()
...
This is different than get_prev_nav_cmd_index() in that it only stores the index if there is a valid lat/lng
2015-08-29 21:17:35 +10:00
Randy Mackay
1271e531e2
Mission: sanity check location
2015-08-27 15:15:56 +09:00
Michael Day
a5e1d8e902
AP_Mission: Give CONINTUE_AND_CHANGE_ALT a parameter: climb/descend
...
Param 1 denotes which direction the user expects the plane to
travel when changing altitude:
0 = no expectation, command completes when within 5 m of altitude.
1 = climb expected, command completes at or above altitude.
2 = descent expected, command completes at or below altitude.
2015-08-20 11:37:17 +10:00
Gustavo Jose de Sousa
34d1a29ec1
AP_Mission: standardize inclusion of libaries headers
...
This commit changes the way libraries headers are included in source files:
- If the header is in the same directory the source belongs to, so the
notation '#include ""' is used with the path relative to the directory
containing the source.
- If the header is outside the directory containing the source, then we use
the notation '#include <>' with the path relative to libraries folder.
Some of the advantages of such approach:
- Only one search path for libraries headers.
- OSs like Windows may have a better lookup time.
2015-08-11 16:38:19 +10:00
Randy Mackay
766ccea3be
Mission: fix bug causing first do-cmd to be run many times
...
The symptom was that if the very first command in the mission was a
do-command, it would be run after every nav-command that didn't have
another do-command before it.
2015-07-17 12:15:08 +09:00
Randy Mackay
429346f4bc
AP_Mission: add missing breaks to case statement
2015-07-17 12:15:06 +09:00
Tom Pittenger
e6122d1a4e
AP_Mission: ensure cache coherence on mission resume
...
- when resuming a mission we should read the value from storage of the same index to ensure we're not continuing an old cached version of the mission item.
- inherent problem: DO commands will continue and will be unaffected unless the new mission has a different DO_ command structure. If so, a set_current_cmd() or reset() should be issued by the GCS.
2015-06-25 10:21:06 +10:00
Andrew Tridgell
9bd8e215b2
AP_Mission: enable DO_AUTOTUNE_ENABLE
2015-06-15 09:20:54 +10:00
Andrew Tridgell
08acde2766
AP_Mission: added ALTITUDE_WAIT NAV command
...
used for HAB launch
2015-06-15 09:20:54 +10:00
Randy Mackay
9c28d61a5c
Mission: protect against endless loops of do-commands
2015-06-01 18:11:54 +09:00
Tom Pittenger
79605de8f5
AP_Mission: replace fabs() with fabsf()
2015-05-09 09:57:27 +10:00
Michael Day
3d3267d472
AP_Mission: Now support mission item MAV_CMD_NAV_LOITER_TO_ALT
2015-04-25 09:12:16 +10:00
Randy Mackay
87e6452ee9
Mission: bug fix when jump target is zero
...
This would result in copter flying to a waypoint high above home
2015-04-21 20:42:49 +09:00
Randy Mackay
888c2289ce
Mission: support do-digicam-control parameters
2015-04-20 13:50:01 +09:00
Randy Mackay
f6021010c5
Mission: support do-mount-control
2015-03-21 21:52:19 +09:00
Andrew Tridgell
3d433d2106
AP_Mission: loop check is only needed in one place
2015-01-23 13:48:45 +11:00
Andrew Tridgell
540cadc086
AP_Mission: prevent infinite loop with linked jump commands
...
this prevents a "jump loop" from causing a firmware lockup. Thanks to
dellarb for reporting this!
2015-01-23 13:14:27 +11:00
Andrew Tridgell
ede920f293
AP_Mission: ensure location options are zero at start of mavlink conversion
2014-12-03 18:29:43 +11:00
Michael Day
b3e693daa4
AP_Mission: Support MAV_CMD_DO_FENCE_ENABLE as a mission item.
2014-11-25 13:02:47 +11:00
Michael Day
b36c1b2c3d
AP_Mission: support for MAV_CMD_CONTINUE_AND_CHANGE_ALT
2014-11-25 10:43:15 +11:00
Michael Day
83c2f497a3
AP_Mission: Change jump_to_landing_sequence to get_landing_sequence_start
2014-10-24 21:42:06 +11:00
Andrew Tridgell
15a661e17a
AP_Mission: fixed logic in jump_to_landing_sequence()
...
see comments on drones-discuss
2014-10-20 08:36:20 +11:00
Andrew Tridgell
8c6b875dcc
AP_Mission: avoid the AP_AHRS cast
...
get_position() is now const
2014-10-20 08:36:20 +11:00
Michael Day
ea91f4d47b
AP_Mission: Added support for MAV_CMD_DO_LAND_START
2014-10-20 08:36:19 +11:00
Randy Mackay
be1621877f
Mission: support GUIDED_ENABLE and GUIDED_LIMITS
...
This replaces the ardupilot only NAV_GUIDED command.
Also remove support for NAV_VELOCITY mission command which will be
replaced by SET_POSITION_TARGET non-mission command.
2014-10-13 21:40:23 +09:00
Randy Mackay
5ca3c4baf6
Mission: fix CHANGE_ALT to store climb rate in lat param
...
The slightly confusing storage of climb rate in the lat field led to a
bug fix a few months ago that actually created a bug.
2014-09-26 23:23:04 +09:00
Randy Mackay
1ce8e453c2
Mission: add support for DO_GRIPPER
2014-09-17 21:14:17 +09:00
Andrew Tridgell
effccacf46
AP_Mission: fixed acceptance radius outgoing
...
this needs to match incoming
2014-09-03 21:15:56 +10:00
Andrew Tridgell
3a5e960fe5
AP_Mission: revert APM_BUILD_TYPE change
2014-09-03 13:28:17 +10:00
Andrew Tridgell
36b854fa98
AP_Mission: fixed build for arduino IDE
2014-09-03 13:20:31 +10:00
Andrew Tridgell
c4f84232e2
AP_Mission: make cmd.p1 be radius on plane for NAV_WAYPOINT
2014-09-03 12:38:30 +10:00
Randy Mackay
d6aa868cac
Mission: start next nav cmd immediately after prev completes
2014-08-27 18:05:49 +10:00
Andrew Tridgell
7a12ff0271
AP_Mission: convert to using StorageManager
2014-08-13 18:46:43 +10:00
Daniel Frenzel
1c7e8f8fb2
AP_Mission: Consecutive return, break, continue, goto or throw statements are unnecessary.
...
Signed-off-by: Daniel Frenzel <dgdanielf@gmail.com>
2014-08-11 09:24:26 +10:00
Andrew Tridgell
df55ae86c4
AP_Mission: added last_change_time_ms() call
...
will be used by terrain lib for scanning waypoints
2014-08-06 17:59:19 +10:00
Randy Mackay
621cc2b953
Mission: bug fix to condition-change-alt
...
Fix contributed by oniondream, thanks!
2014-08-01 12:51:50 +09:00
Andrew Tridgell
34cbaa6f17
AP_Mission: added support for MAV_FRAME_GLOBAL_TERRAIN_ALT
2014-07-25 08:33:44 +10:00
Andrew Tridgell
feaf9751cc
AP_Mission: removed use of MAV_CMD_NAV_VELOCITY and MAV_CMD_NAV_GUIDED
2014-07-24 21:38:31 +10:00
Randy Mackay
fe8a5be802
AP_Mission: support MAV_CMD_NAV_VELOCITY msg
2014-07-06 17:01:00 +09:00
Randy Mackay
f4c9d58051
AP_Mission: add support for MAV_CMD_NAV_GUIDED
2014-07-06 17:00:26 +09:00
Randy Mackay
2f7dee3ba5
AP_Mission: squeeze loiter turns radius into high byte of p1
2014-06-17 20:53:50 +10:00
Andrew Tridgell
f0df912a11
AP_Mission: added support for MAV_CMD_DO_INVERTED_FLIGHT
2014-06-05 15:44:18 +10:00
Randy Mackay
05f5164dfa
Mission: rename AUTORESET to RESTART
2014-05-09 11:31:37 +09:00
Andrew Tridgell
818e500509
AP_Mission: improve the AP_Mission docs
...
DisplayName isn't a description
2014-04-29 11:46:06 +10:00
Andrew Chapman
782fbe1ec5
AP_Mission: added reset() function
2014-04-29 11:46:06 +10:00
Andrew Chapman
a80e72ff82
AP_Mission: added MIS_AUTORESTART parameter
...
- added MIS_AUTORESTART parameter, defaults to 0
- added start_or_resume() function to either start or resume a mission
based on that parameter value
2014-04-29 11:46:06 +10:00
Randy Mackay
d8f9a1c6c6
Mission: add support for MAV_CMD_DO_PARACHUTE
2014-04-07 13:36:55 +09:00