Randy Mackay
193799346c
AP_SmartRTL: peek_point method peeks at next point
...
includes peek point takes semaphore
2021-04-03 12:07:59 +09:00
Leonard Hall
64ae08a925
AC_Loiter: fix references to position error
2021-04-03 12:07:59 +09:00
Leonard Hall
d0ab74e496
AC_Circle: fix references to position error
2021-04-03 12:07:59 +09:00
Randy Mackay
2201450180
AC_WPNav: renames and comment fixes
2021-04-03 12:07:59 +09:00
Randy Mackay
85b24cf641
AC_WPNav: fix get_wp_destination_loc
...
was incorrectly adding alt-above-terrain as if it was alt-above-ekf-origin
also fixup comments
2021-04-03 12:07:59 +09:00
Leonard Hall
32c27b32aa
AC_WPNav: support for SCurve navigation
...
set_wp_destination clear yaw target
limit velocity and acceleration based on track slope
add is_active() and remove unused reached_spline_destination
init accepts desired speed
set_kinematic_limits uses current speed limits instead of defaults
add time compression to prevent target moving too fast for air
implement alternative spline
remove vel-target-length
set_wp_destination always calculates this leg
set_kinematic_limits moved to scurve
fix origin speed after spline segment
spline terrain following fix
handle s-curves with mismatching alt types
fix set_spline_destination_next
add update_track_with_speed_accel_limits
Change to next waypoint at corner apex
use scurve advance along track
remove unused definitions and out-of-date todo
set_spline_destination_next sets fast_waypoint
scurve origin speed set from spline target velocity
fixup takeoff delay
2021-04-03 12:07:59 +09:00
Leonard Hall
6a8ba6f329
AC_PosControl_Sub: update for new position controller changes
2021-04-03 12:07:59 +09:00
Randy Mackay
cb0d37586e
AC_PosControl: use Vector limit_length and formatting fixes
2021-04-03 12:07:59 +09:00
Leonard Hall
ba00c2edd6
AC_PosControl: alt hold controller update
...
pass accel limit top_pos_xy
prearm check updated
fix PSC_VELZ_FLTE/D param descriptions
fix VelZ FF param desc
limit maximum desired z component
integrate AC_PID_Basic
2021-04-03 12:07:59 +09:00
Leonard Hall
b73ad1a1bc
AC_PosControl: remove unused sqrt_controller_3D
2021-04-03 12:07:59 +09:00
Leonard Hall
49da872218
AC PosControl: fix position error get functions
2021-04-03 12:07:59 +09:00
Randy Mackay
e24f23e076
AP_Mission: add restart_current_nav_cmd
2021-04-03 12:07:59 +09:00
Randy Mackay
2357568eb1
AP_Mission: Mission_Command struct gets comparison operators
2021-04-03 12:07:59 +09:00
Leonard Hall
83b7c496b5
AP_Logger: support for position controller logging
2021-04-03 12:07:59 +09:00
Randy Mackay
ae66803148
AC_AttitudeControl: minor optimisation and comment fixes
2021-04-03 12:07:59 +09:00
Leonard Hall
d6e3495eca
AC_AttitudeControl: support for feedforward rate in angle request for yaw
2021-04-03 12:07:59 +09:00
Leonard Hall
1d720cc5e9
AC_PID: library update and additional functions
...
includes corrections from peer review
2021-04-03 12:07:59 +09:00
Randy Mackay
bc0da915c4
AP_Math: add SplineCurve library
...
Co-authored-by: Leonard Hall <leonardthall@gmail.com>
includes corrections from peer review
2021-04-03 12:07:59 +09:00
Leonard Hall
af7403f4e9
AP_Math: add SCurve library
...
SCurve const more local variables
rename update to get_jerk_vel_pos_at_time
removed unused update
debug output in SITL
fixes to ensure finished at end of path
fixes including validity check
includes corrections from peer review
2021-04-03 12:07:59 +09:00
Randy Mackay
0e506a71a1
AP_Math: remove control's limit_vector_length
...
these have been moved to Vector2f and Vector3f
2021-04-03 12:07:59 +09:00
Randy Mackay
e2b46d05dc
AP_Math: Vector2,3 get limit_length methods
2021-04-03 12:07:59 +09:00
Leonard Hall
3bb0482795
AP_Math: add update_pos_vel_accel to control
...
also add shape_vel, shape_pos_vel and stopping_distance
also add calculation of kinematic limits
2021-04-03 12:07:59 +09:00
Randy Mackay
67f2c79717
AP_InternalError: added invalid_arguments failure
...
this is intended to catch problems where we have unexpectedly received
invalid arguments. For example an out-of-bounds target speed that
should have been caught somewhere else.
running out of bits so we use a single bit to capture invalid inputs to or output from a calculation
2021-04-03 12:07:59 +09:00
Peter Barker
f0094bac40
autotest: remove copied-in duplicate of pymavlink rotmat
2021-04-03 13:26:06 +11:00
Peter Barker
dfa342a79f
autotest: correct rc-values-good debug
2021-04-03 08:59:14 +11:00
Peter Barker
7d9daccdf7
autotest: fix mavproxy switch test
...
The order in which we fix the environment means that we need to be
listening on the correct port for rc values - so just fix it in the test
2021-04-03 08:58:52 +11:00
Peter Barker
d384ba6585
autotest: increase time permitted for Copter to turn east
...
Sometimes they turn almost 360 which takes a while
2021-04-02 21:29:43 +11:00
Peter Barker
2c6bdd200c
autotest: fix make_safe_filename for Valgrind
...
Valgrind treats this as a format string so the % is bad
2021-04-02 20:51:18 +11:00
Peter Barker
18ded114ae
Tools: param_metadata; stop prettifying XML before emitting
...
indent is not available on our documentation server:
[build_parameters.py]
Traceback (most recent call last):
File "./param_parse.py", line 422, in <module>
do_emit(XmlEmit())
File "./param_parse.py", line 415, in do_emit
emit.close()
File "/home/wiki/build_wiki/ardupilot/Tools/autotest/param_metadata/xmlemit.py
", line 24, in close
etree.indent(self.paramfile)
AttributeError: module 'lxml.etree' has no attribute 'indent'
2021-04-02 14:39:39 +11:00
Peter Barker
018b1425ce
AP_AdvancedFailsafe: remove APM from description
2021-04-01 22:49:34 +11:00
Peter Barker
cee348d082
Tools: make and declare bisect-helper.py flake8-compliant
2021-04-01 19:11:50 +11:00
Peter Barker
ee79895a4e
Tools: make and declare examples.py flake8-compliant
2021-04-01 19:11:50 +11:00
Peter Barker
79d34b3b64
Tools: make and declare build_binaries.py flake8-compliant
2021-04-01 19:11:50 +11:00
Peter Barker
fff4aa8bde
autotest: increase allowed time for climb_before_turn to get home
2021-04-01 19:11:31 +11:00
Josh Henderson
fb789a07ce
AC_WP_Nav_OA: origin_loc & dest_loc should use _terrain_alt_oabak
2021-04-01 14:44:40 +09:00
Sergey Bokhantsev
ef95bf088c
AP_Motors: Constrain get_throttle_hover value with allowed range
2021-04-01 13:06:02 +09:00
Peter Barker
f988064e48
Tools: add a tool to help determine best speedup for autotest
2021-04-01 11:27:17 +11:00
Peter Barker
d2c00f7b26
autotest: ensure RC thread is killed after each run_test
...
Every run_test starts a thread. del is not being called. So clean it
up in the caller
2021-04-01 11:00:54 +11:00
Peter Barker
500679ec5b
autotest: correct creation of default parameters
...
Simulation won't start if nothing is connected to 5760 - so just connect
mavproxy there
2021-03-31 23:29:47 +11:00
Samuel Tabor
a301808e7a
SITL: Add parsing of airspeed to SIM_JSON
2021-03-31 19:26:02 +11:00
Iampete1
0b8cdaf392
AP_Scripting: add mission command receve function, binding and example
2021-03-31 19:23:13 +11:00
Iampete1
849ad8c6de
AP_Mission: support MAV_CMD_DO_SEND_SCRIPT_MESSAGE
2021-03-31 19:23:13 +11:00
Iampete1
82228469c8
AP_Scripting: add reset_remianing battery binding
2021-03-31 19:21:59 +11:00
Iampete1
9fdceeded3
AP_BattMoniter: add reset remaining per-instance rename existing to _mask
2021-03-31 19:21:59 +11:00
Iampete1
0fe38da522
GCS_MAVLink: rename battery reset function
2021-03-31 19:21:59 +11:00
Randy Mackay
d343c569c2
AP_Arming: check for only first compass being disabled
...
If only the first compass is disabled, users may expect other enabled compasses to be used but they won't be
2021-03-31 19:16:01 +11:00
Randy Mackay
64c4b6a42b
AP_Compass: remove unused set_use_for_yaw
2021-03-31 19:16:01 +11:00
Ari Krupnik
c6bf7475f2
Rover: fixing typo in comment
2021-03-31 16:31:13 +11:00
Peter Barker
ba972b6b46
autotest: fix --map option
2021-03-31 16:30:25 +11:00
Peter Barker
d621fe0cde
autotest: correct sub gripper mission
...
Ordinarily not run because gripper is disabled
2021-03-31 13:43:31 +11:00
