Mirror/ardupilot
5
0
Fork 0
mirror of https://github.com/ArduPilot/ardupilot synced 2025-01-07 16:38:30 -04:00
Code Issues Packages Projects Releases Wiki Activity
6,954 Commits 71 Branches 510 Tags 770 MiB
175f69a64f
Commit Graph

1886 Commits

Author SHA1 Message Date
Randy Mackay
175f69a64f ArduCopter: smooth throttle when switching from manual throttle to alt hold 
new set_accel_throttle_I_from_pilot_throttle function copies the
difference between the pilot's throttle and hover throttle to the
accelerometer based throttle controller's I term.
 2013-01-13 20:00:59 +11:00
Randy Mackay
9ad6f711f8 ArduCopter: replace FS_THR_RTL_MIN_DISTANCE with wp_radius 
This effectively means that an RTL kicked off by a failsafe will
immediately switch to LAND mode only if within 2 meters.  Previously the
radius was much wider (15m).
 2013-01-13 20:00:47 +11:00
Randy Mackay
19abdc3cd3 ArduCopter: update release notes for rc3 2013-01-13 20:00:43 +11:00
Randy Mackay
12f885c33c ArduCopter: disable ITERM logging by default 
This message takes 1ms to write and we are running over our limits on
some loops.
 2013-01-13 20:00:39 +11:00
Randy Mackay
fbed8b8861 ArduCopter: alphabetized the contributors list 
Jonathan Challinger added
 2013-01-13 20:00:28 +11:00
Randy Mackay
5965914039 ArduCopter: increase firmware version to 2.9-rc3 2013-01-13 20:00:25 +11:00
Andrew Tridgell
b0c710b67f Copter: move read_AHRS() before run_rate_controllers() 
this ensures the rate controllers use the latest data
 2013-01-13 20:00:14 +11:00
rmackay9
f25f1cb3bf ArduCopter: changed alt hold to use the sonar if enabled and healthy 2013-01-13 19:56:19 +11:00
rmackay9
21b6c78d12 ArduCopter: added get_throttle_althold_with_slew to allow slower altitude target changes 
Improved surface tracking by using slewed althold controller
Reduced sonar mode filter to just 3 elements to reduce lag but at the possible consequence of allowing sonar noise to creep through for people with margin sonar set-ups.
 2013-01-13 19:51:47 +11:00
Pat Hickey
164246c7d8 ArduCopter: better instructons for setup_motors cli test 
* i just spent hours confused about this
 2013-01-13 00:17:17 -08:00
Andrew Tridgell
72c8a14e76 Copter: fix trad heli log build 2013-01-13 17:57:47 +11:00
Andrew Tridgell
78fd5bb23f Copter: get rid of remaining Log.pde warnings 2013-01-13 17:53:39 +11:00
Andrew Tridgell
36e38eeef7 Copter: ensure ahrs.init() is called 2013-01-13 17:32:48 +11:00
Andrew Tridgell
3039c37f95 Copter: use macros from common header 2013-01-13 17:31:42 +11:00
Pat Hickey
d7eeeab79e ArduCopter: fix new style Log.pde build for PX4. 
randy - you should please review these changes to make sure you wanted
to have the int16_t type in all of these structs, or how you want to
convert all these other integer types to int16_t if you do need it that
way.
 2013-01-12 13:11:25 -08:00
Randy Mackay
87627d883b ArduCopter: use new logging method for remaining packet types 
Additional changes include renaming RAW dataflash type to IMU
 2013-01-13 00:17:44 +09:00
Randy Mackay
177da0ca74 ArduCopter: fixed minor bug in logging of parameter changes to dataflash 
It is questionable whether we should even bother writing these to the
dataflash as there is no way to recognise which parameter has been
affectded
 2013-01-13 00:15:34 +09:00
Randy Mackay
b4bbae56c6 ArduCopter: reduce redundant event logging 
We now only write state changes to the dataflash log when they have
changed.
Also replaced <tab> with <space> in AP_State.pde
 2013-01-13 00:13:10 +09:00
Andrew Tridgell
af478d52bc Copter: use the new logging methods for 2 packet types 
the rest still need to be converted
 2013-01-12 18:15:23 +11:00
Andrew Tridgell
0fe7901422 Copter: only print perf data when SCHED_DEBUG is non-zero 2013-01-12 12:06:40 +11:00
Andrew Tridgell
dcb181d2d8 Copter: use new AP_Scheduler library 2013-01-12 12:02:57 +11:00
Andrew Tridgell
585459ece9 Copter: tweak the serial buffer sizes 
we only need the large buffers for HIL
 2013-01-11 10:31:55 +11:00
Andrew Tridgell
2e57720444 Copter: move memcheck_init() earlier in setup 2013-01-11 10:24:21 +11:00
Andrew Tridgell
21e979910f Copter: improved 'FRAME' docs 2013-01-10 15:44:13 +11:00
Pat Hickey
0ff6ed12b1 ArduCopter Makefile: Don't include targets.mk directly (included by apm.mk) 2013-01-09 13:15:38 -08:00
James Bielman
7374e5d84e ArduCopter: Use 16-bit arithmetic when comparing event tick counters. 
- On the ARM, once the tick counter wrapped, we stopped running events
  because the wraparound case wasn't being handled correctly.  Make
  sure the comparison is 16 bits to prevent this.
 2013-01-09 11:19:52 -08:00
James Bielman
7827a4a54a ArduCopter: Add AP_HAL_SMACCM support. 
- Added default configuration to "config.h".
- Added main function to run under FreeRTOS with HWF4.
 2013-01-09 11:19:51 -08:00
James Bielman
ab37f833db MS5611: Fix CONFIG_MS5611_SERIAL definitions. 
- Make sure the values are defined as integers.  We were always using
  SPI rather than using I2C when desired.
 2013-01-09 11:19:51 -08:00
Andrew Tridgell
e575c5eba0 Copter: read baro at 50Hz 2013-01-09 23:46:05 +11:00
Andrew Tridgell
269804e866 Copter: use barometer.accumulate() 
this gives us more consistent timing and faster baro reads on APM1
 2013-01-09 23:08:19 +11:00
Andrew Tridgell
91ad870f11 Copter: check bitmask in more logging functions 2013-01-09 23:06:40 +11:00
Andrew Tridgell
a237b6cc7b Copter: update for new AP_Param API 2013-01-09 13:30:58 +11:00
Andrew Tridgell
860f4b2605 Copter: merge the latest 2.9 changes into master 2013-01-08 14:37:40 -08:00
Andrew Tridgell
d11dde578f Copter: a useful bit of timing debug code 
enable when looking at main loop timing
 2013-01-07 11:07:44 +11:00
Andrew Tridgell
647b3b09b6 Copter: ensure we process deferred mavlink messages 2013-01-07 11:07:39 +11:00
Andrew Tridgell
d952ccf968 Copter: added main_loop_ready() function 
this tells us when the main loop is ready to run. MAVLink won't send a
message if the main loop could run.
 2013-01-07 11:07:34 +11:00
Andrew Tridgell
b079a96eaf Copter: removed GPS_STATUS message 
this message is huge, and completely pointless now that we have
num_satellites in GPS_RAW_INT
 2013-01-05 20:39:31 +11:00
Andrew Tridgell
c48714be16 Copter: enabled PX4 sensors 2013-01-05 20:39:31 +11:00
James Bielman
264db3670e AP_Baro: Add CONFIG_MS5611_SERIAL option to choose between SPI and I2C. 
- Update ArduCopter and ArduPlane modules to pass the correct serial
  driver to the MS5611 driver.
- Update barometer examples, assuming SPI.
 2013-01-03 13:48:06 -08:00
rmackay9
ed79e8c954 ArduCopter: correct TRIM_THROTTLE parameter comments 2013-01-03 00:39:18 +09:00
rmackay9
861a66e26e ArduCopter: remove @brief from GCS_MAVLINK class's comments because they mess up the mission planner's parsing of parameter descriptions 2013-01-03 00:34:10 +09:00
rmackay9
ba8e9c8f9e ArduCopter: revert path for reading gcs parameter descriptions 2013-01-02 23:51:27 +09:00
rmackay9
d56e9cc701 ArduCopter: change path for GCS_Mavlink parameter descriptions 2013-01-02 23:42:05 +09:00
rmackay9
4ef7e7b1c6 ArduCopter: add parameter descriptions for GCS_Mavlink objects 2013-01-02 23:36:48 +09:00
Andrew Tridgell
94e3322e24 Copter: fixed build on px4 2013-01-02 22:09:02 +11:00
rmackay9
886329898c ArduCopter: minor fixup to a few parameter descriptions 2013-01-02 18:50:25 +09:00
rmackay9
ac028cca74 ArduCopter: remove spaces to allow MP to parse RC Channel parameter descriptions 2013-01-02 18:40:59 +09:00
rmackay9
42a5d183da ArduCopter: added parameter descriptions for optflow, throttle and loiter pid controllers 2013-01-02 18:32:11 +09:00
rmackay9
ffa923981c ArduCopter: added parameter description for navigation and some throttle controllers 2013-01-02 17:44:21 +09:00
rmackay9
4a975d35ce ArduCopter: add parameter descriptions for loiter's lat and lon rate controllers 2013-01-02 17:20:58 +09:00