Commit Graph

161 Commits

Author SHA1 Message Date
Andrew Tridgell
00526359b0 HAL_Linux: use dprintf() instead of sprintf and write 2014-11-10 06:51:53 +11:00
bugobliterator
af203760bd HAL_Linux: change the return type of AP_HAL::Util::tonealarm_init() to signed int8_t.
This is a part of a set of fixes for the bugs and typos tridge discovered and shared inside earlier commits for setting up tonealarm.
2014-11-10 06:27:48 +11:00
bugobliterator
298b27444a HAL_Linux: Add ToneAlarm Driver to Linux_HAL
ToneAlarm is setup for Beaglebone Black using pwm, toneAlarm thread runs on second last priority.
2014-11-10 06:27:48 +11:00
Andrew Tridgell
02581f4c05 HAL_Linux: re-fix dirty mask bug in Storage
when conversion to a single parent class was done it re-introduced a
bug that was fixed a while ago

See commit d238ff7c5d
2014-11-08 11:55:55 +11:00
Andrew Tridgell
330dab2fe3 HAL_Linux: fixed some warnings 2014-11-08 11:49:09 +11:00
bugobliterator
4908e335d2 HAL_Linux: Add Storage.cpp containing common storage class member definitions 2014-11-08 11:36:12 +11:00
bugobliterator
dd6d520385 HAL_Linux:Create subclass to handle FRAM Storage under main Storage Class 2014-11-08 11:36:09 +11:00
Andrew Tridgell
14a6878bcd HAL_Linux: fixed termios settings on BBB initial boot
this should fix the problem of losing the GPS in flight
2014-11-07 22:15:28 +11:00
Andrew Tridgell
8506e8b5fb HAL_Linux: fixed linux build 2014-10-30 17:47:18 +11:00
John Williams
b9f0310b82 hal_ap_linux: Make PRU constants private to reduce #define namespace pollution.
Forthcoming Zynq port AP_HAL_Linux uses similar constants with different
values - move these as private member constants to avoid collisions.

Signed-off-by: John Williams <john@whelanwilliams.net>
2014-10-30 13:51:41 +11:00
Mikhail Avkhimenia
81de994fef HAL_Linux: separate RCInput for PRU and Navio 2014-10-30 13:30:07 +11:00
Mikhail Avkhimenia
e05151f0e0 HAL_Linux: Initialize i2c before rcoutput (required by i2c pwm chips for initialization) 2014-10-30 13:30:07 +11:00
Mikhail Avkhimenia
2f0900b0a8 HAL_Linux: add GPIO driver for Raspberry Pi 2014-10-30 13:30:07 +11:00
Mikhail Avkhimenia
07ed93cea0 HAL_Linux: add PCA9685 based RCOutput for Navio 2014-10-30 13:30:07 +11:00
Alexander Mergel
14c401c0f4 AP_HAL_Linux: [Bugfix] prevent memory acces violation in process_dsm_pulse
When a S.Bus signal is fed into the rcin-Pin AruPlane on the BBB get's a
Segmentation fault. This patch prevents the memory acces to dsm_state.bytes[16] outside
of the array bounds. The patch should be reviewed by sombody who knows the DSM protocol,
as i don't.
2014-10-30 11:57:35 +11:00
Andrew Tridgell
39fadad7d6 HAL_Linux: fixed build warnings 2014-10-09 16:49:23 +11:00
Andrew Tridgell
c834589daa HAL_Linux: reduce the number of times we split up UART reads 2014-10-09 12:29:25 +11:00
Andrew Tridgell
076bb1294e HAL_Linux: improved UDP packetisation and add flow control reporting
report we have flow control on UDP and TCP
2014-10-09 12:29:25 +11:00
Andrew Tridgell
cebfef3ead HAL_Linux: don't accept less than 5 input channels 2014-10-09 09:19:35 +11:00
Andrew Tridgell
a3fee16604 HAL_Linux: added DSM/Spektrum RCInput support
this decodes DSM using the RCIN pulses from the PRU
2014-10-08 12:50:50 +11:00
Andrew Tridgell
3e3f87188b HAL_Linux: enable DSM power pin 2014-10-08 12:50:50 +11:00
Andrew Tridgell
50e5ae6f7a HAL_Linux: added low level DSM decoder
based on dsm.c from PX4 project
2014-10-08 12:50:50 +11:00
Andrew Tridgell
9b207d029d HAL_Linux: change ring buffer to 300 entries 2014-10-07 14:57:34 +11:00
Andrew Tridgell
b1845ed00d HAL_Linux: initial support for parallel SBUS and PPM-SUM decoding 2014-10-07 14:57:34 +11:00
Andrew Tridgell
42e9dc3c31 HAL_Linux: added SBUS decoder from PX4 project
thanks Lorenz!
2014-10-07 14:57:34 +11:00
Andrew Tridgell
e0e534628b HAL_Linux: support direct UDP output from UART drivers
this allows safe operation over WiFi links without MAVProxy
2014-10-06 15:13:03 +11:00
Andrew Tridgell
d238ff7c5d HAL_Linux: fixed storage bug in Linux too 2014-09-11 18:58:54 +10:00
Andrew Tridgell
46ac52bccc HAL_Linux: removed retry loop on UART open
this was there for HAL_PX4 only, and makes no sense on Linux
2014-08-27 18:31:38 +10:00
Andrew Tridgell
024d3b71e7 HAL_Linux: use a semaphore in suspend_timer_procs()
this is the start of multi-core aware code
2014-08-22 21:13:11 +10:00
Andrew Tridgell
ead82ee581 HAL_Linux: implement millis64() and micros64() 2014-08-20 08:00:21 +10:00
Andrew Tridgell
b9dc2335ee HAL_Linux: run timer thread at average 1kHz without drift
this avoids drift in the 1kHz timer, to avoid bias in the IMU
filtering
2014-08-19 20:03:34 +10:00
Andrew Tridgell
8f280d212b HAL_Linux: don't use usleep() in suspend_timer_procs()
usleep can cause a large delay with PREEMPT kernel
2014-08-19 20:03:33 +10:00
Andrew Tridgell
94e14f5dcb HAL_Linux: split off RCOutput class to be specific to PXF and ERLE
this fixes the Replay tool
2014-08-19 20:03:33 +10:00
Andrew Tridgell
2ce219aeb8 HAL_Linux: split RCInput class into generic and PRU implementations
this will make it easier for other boards (such as NAVIO) to implement
their own RCInput mechanism
2014-08-19 20:03:33 +10:00
Andrew Tridgell
b4be93113c HAL_Linux: prevent read past end of buffer 2014-08-19 10:08:17 +10:00
Andrew Tridgell
b40bd479c4 HAL_Linux: moved FRAM vs FS choice into HAL_Linux headers 2014-08-19 10:08:17 +10:00
Andrew Tridgell
9fccb5f5ed HAL_Linux: clear more UART flags
this fixes a major timing issue caused by bad UART flags (I suspect
the echo flags) and the GPS auto detection code
2014-08-19 10:08:17 +10:00
Andrew Tridgell
c87b0adc29 HAL_Linux: the MS5611 seems to be a bit happier at higher speed
still getting some bogus data, but less
2014-08-19 10:08:17 +10:00
Andrew Tridgell
6cc304e486 HAL_Linux: RCOutput should default to 50Hz on all boards 2014-08-19 10:08:16 +10:00
Andrew Tridgell
9d948d5a26 HAL_Linux: fixed name space collision in RCOutput 2014-08-19 10:08:16 +10:00
Andrew Tridgell
721d349922 HAL_Linux: fixed build of BusTest 2014-08-19 10:08:16 +10:00
Andrew Tridgell
a4ef512f10 SPIDriver: fixed handling of 0 based SPI bus numbers 2014-08-19 10:08:16 +10:00
Andrew Tridgell
5fb2ad0068 HAL_Linux: fixed safety of RCInput code
don't loop forever waiting for pulses
2014-08-19 10:08:16 +10:00
bugobliterator
ac11d282b5 HAL_Linux: Add support for PPM input to HAL_Linux
rcin thread continuously scans for values inside ring buffer maintained by pru with rcinpru0 firmware.
2014-08-19 10:08:16 +10:00
bugobliterator
4b2f7cd163 HAL_Linux: Add FRAM HAL driver support for non-volatile storage
Support for File System starage mode is retained, appropriate Storage
mode can be set by defining USE_FS_STORAGE for File System storage
aand US_FRAM_STORAGE for FRAM storage.  Note: FS storage and FRAM
storage are never synced as of now.
2014-08-19 10:08:16 +10:00
Victor Mayoral Vilches
8a71fdf092 HAL_Linux: minor syntax fix in UARTDriver
Typo noticed by @hcervino.
2014-08-19 10:08:16 +10:00
Silvia
b6baf78e73 HAL_Linux:duplicate #include <sys/types<deleted 2014-08-19 10:08:16 +10:00
Silvia
7fd0e8345d HAL_Linux: Duplicate #include <unistd.h>deleted 2014-08-19 10:08:16 +10:00
Andrew Tridgell
d40d0f6aec AP_HAL: removed old storage type read/write functions
not needed any more
2014-08-13 18:46:44 +10:00
Mikhail Avkhimenia
a09fbb4171 HAL_Linux: Add SPI configuration for Navio
This changes the SPI bus number to be zero based on Linux
2014-08-12 22:13:00 +10:00