also direct throttle nudge replaced with speed nudge
calc_speed_max estimates vehicle's top speed based on cruise-speed and
cruise-throttle
steering mode now provides total target speed instead of using speed plug
throttle nudge
motor limits provided to attitude control to stop i-term buildup
uses negative desired speed instead of reversed flag
reporting to GCS uses new throttle controller
braking is simply enabled and allows a reverse motor output regardless of vehicle
speed
set_guided_WP replaced by mode_guided.set_desired_location
nav_set_yaw_speed replaced with mode_guided.set_desired_heading_and_speed
set_guided_velocity replaced with mode_guided.set_desired_turn_rate_and_speed
guided_control structure replaced with mode_guided members
use_pivot_steering accepts yaw-error argument instead of calculating it itself internally
move throttle_slew_limit and THR_SLEWRATE parameter
move have_skid_steering to library
move mix_skid_steering to library's output_skid_steering method
move radio.cpp's output channel initialisation to motor's init method
use motors.get_throttle and get_steering instead of getting from Servo objects
use motors.set_throttle and set_steering instead of setting to Servo object
AP_Arming::arming_required is replaced with SAFE_DISARM parameter
Rover now accepts a new message MAV_CMD_NAV_SET_YAW_SPEED
which has an angle in centidegrees and a speed scale and the rover
will drive based on these inputs.
../../ArduCopter/GCS_Mavlink.cpp: In member function 'void Copter::send_extended_status1(mavlink_channel_t)':
../../ArduCopter/GCS_Mavlink.cpp:281:37: error: suggest parentheses around operand of '!' or change '&' to '&&' or '!' to '~' [-Werror=parentheses]
uint32_t sensors_error_flags = !control_sensors_health & control_sensors_enabled & control_sensors_present;
^
compilation terminated due to -Wfatal-errors.
cc1plus: all warnings being treated as errors
Thanks to Ralph Campbell <ralphcampbell1@gmail.com> for the bug report.
Also supports SET_POSITION_TARGET_LOCAL_NED but for both messages only the position fields are consumed. Support for velocity, acceleration and yaw fields are not included.
Further to refactor of RC_Channel class which included
adding get_xx set_xx methods, change reads and writes to the public members
to calls to get and set functionsss
old public member(int16_t) get function -> int16_t set function (int16_t)
(expression where c is an object of type RC_Channel)
c.radio_in c.get_radio_in() c.set_radio_in(v)
c.control_in c.get_control_in() c.set_control_in(v)
c.servo_out c.get_servo_out() c.set_servo_out(v)
c.pwm_out c.get_pwm_out() // use existing
c.radio_out c.get_radio_out() c.set_radio_out(v)
c.radio_max c.get_radio_max() c.set_radio_max(v)
c.radio_min c.get_radio_min() c.set_radio_min(v)
c.radio_trim c.get_radio_trim() c.set_radio_trim(v);
c.min_max_configured() // return true if min and max are configured
Because data members of RC_Channels are now private and so cannot be written directly
some overloads are provided in the Plane classes to provide the old functionality
new overload Plane::stick_mix_channel(RC_Channel *channel)
which forwards to the previously existing
void stick_mix_channel(RC_Channel *channel, int16_t &servo_out);
new overload Plane::channel_output_mixer(Rc_Channel* , RC_Channel*)const
which forwards to
(uint8_t mixing_type, int16_t & chan1, int16_t & chan2)const;
Rename functions
RC_Channel_aux::set_radio_trim(Aux_servo_function_t function)
to RC_Channel_aux::set_trim_to_radio_in_for(Aux_servo_function_t function)
RC_Channel_aux::set_servo_out(Aux_servo_function_t function, int16_t value)
to RC_Channel_aux::set_servo_out_for(Aux_servo_function_t function, int16_t value)
Rationale:
RC_Channel is a complicated class, which combines
several functionalities dealing with stick inputs
in pwm and logical units, logical and actual actuator
outputs, unit conversion etc, etc
The intent of this PR is to clarify existing use of
the class. At the basic level it should now be possible
to grep all places where private variable is set by
searching for the set_xx function.
(The wider purpose is to provide a more generic and
logically simpler method of output mixing. This is a small step)
This has no side effects, but since all implementations were basically
the same, move the implementation to GCS_Common and the only part that
adjusts the rate based on which which stream to each individual
GCS_MAVLINK implementation.
Having the version macro in the config.h and consequently in the main
vehicle header means that whenever the version changes we need to
compiler the whole vehicle again. This would not be so bad if we weren't
also appending the git hash in the version. In this case, whenever we
commit to the repository we would need to recompile everything.
Move to a separate header that is include only by its users. Then
instead of compiling everything we will compile just a few files.
Instead of going through 'hal' then 'scheduler', use directly the AP_HAL
functions. Besides removing indirection that is not necessary for such
functions, this patch ends up reducing the code size in the call sites.
For example, building ArduCopter for PX4 with this change (compared to
before introduction of the functions) yields almost 3k bytes of code
size.
# ArduCopter build before the functions (1b29a1af46)
text data bss dec hex filename
895264 2812 62732 960808 ea928 /.../px4fmu-v2_APM.build/firmware.elf
# ArduCopter build after this patch
text data bss dec hex filename
892264 2812 62732 957808 e9d70 /.../px4fmu-v2_APM.build/firmware.elf
A later patch will remove the unused functions in the Schedulers.
Global revision of message severity values.
Required also change to the low priority function gcs_send_text_fmt()
on GCS_Mavlink.cpp to disable the automatic setting of priority on
messages sent by this function
Remove the checks for HAL_CPU_CLASS > HAL_CPU_CLASS_16 and
HAL_CPU_CLASS >= HAL_CPU_CLASS_75. Corresponding dead code will be
removed on separate commits.
prog_char and prog_char_t are now the same as char on supported
platforms. So, just change all places that use them and prefer char
instead.
AVR-specific places were not changed.
Now variables don't have to be declared with PROGMEM anymore, so remove
them. This was automated with:
git grep -l -z PROGMEM | xargs -0 sed -i 's/ PROGMEM / /g'
git grep -l -z PROGMEM | xargs -0 sed -i 's/PROGMEM//g'
The 2 commands were done so we don't leave behind spurious spaces.
AVR-specific places were not changed.
The PSTR is already define as a NOP for all supported platforms. It's
only needed for AVR so here we remove all the uses throughout the
codebase.
This was automated with a simple python script so it also converts
places which spans to multiple lines, removing the matching parentheses.
AVR-specific places were not changed.
This is a safety change. Lets say you have a GCS which is in
followme mode which is really GUIDED mode with continually updated
waypoints. If the user then changes mode with the RC transmitter to
HOLD or anything else then the Rover should STOP listening to the
updated guided mode waypoints. This is how Plane/Copter work.
