Commit Graph

549 Commits

Author SHA1 Message Date
Peter Barker abf32906d2 GCS_MAVLink: support gripper commands as both long and int 2023-11-08 18:15:25 +11:00
Peter Barker 09ab14c69f GCS_MAVLink: handle battery reset as both long and int 2023-11-08 18:14:27 +11:00
Peter Barker 1d08900cb0 GCS_MAVLink: handle MAV_CMD_DO_SPRAYER as both long and int 2023-11-07 10:55:46 +11:00
Peter Barker 187ae07225 GCS_MAVLink: handle camera messages as COMMAND_INT as well as COMMAND_LONG 2023-11-02 15:54:13 +11:00
Peter Barker e162e74c0c GCS_MAVLink: allow MAV_CMD_RUN_PREARMS as both long and int 2023-11-01 19:30:44 +11:00
Peter Barker 78475cad5c GCS_MAVLink: handle FLASH_BOOTLOADER as command-long and command-int 2023-10-31 11:32:32 +11:00
Peter Barker afd85c8613 GCS_MAVLink: handle MAV_CMD_START_RX_PAIR as both int and long 2023-10-31 11:18:57 +11:00
Peter Barker 2ac9cc94c6 GCS_MAVLink: correct compilation if rangefinder disabled 2023-10-27 14:16:47 +11:00
Peter Barker 2412ba495d GCS_MAVLink: remove handling of PREFLIGHT_SET_SENSOR_OFFSETS
This was the old offboard-calibration code.

We've checked MAVProxy, QGC and MissionPlanner and they're not using this code.

The onboard calibration stuff is better.
2023-10-26 13:19:59 +11:00
Peter Barker 740b939aa5 GCS_MAVLink: handle control-high-latency as both long and int 2023-10-26 13:19:29 +11:00
Peter Barker 21eaa08333 GCS_MAVLink: handle MAV_CMD_NAV_TAKEOFF via command_long and command_in 2023-10-24 12:59:19 +11:00
Peter Barker 0b04f765d4 GCS_MAVLink: factor out a virtual mav_frame_for_command_long method 2023-10-24 12:59:19 +11:00
Peter Barker 25846eb2bc GCS_MAVLink: handld MAV_CMD_DO_FENCE_ENABLE as both long and int 2023-10-24 11:37:18 +11:00
Peter Barker 37b02725b3 GCS_MAVLink: handle MAV_CMD_DO_SEND_BANNER as both long and int 2023-10-18 19:49:17 +11:00
Peter Barker e71227fe3a GCS_MAVLink: handle MAV_CMD_GET_HOME_POSITION as both long and int 2023-10-18 19:48:23 +11:00
Peter Barker 7713b531a0 GCS_MAVLink: allow setting modes via COMMAND_INT and DO_SET_MODE 2023-10-17 10:41:36 +11:00
Peter Barker 90d39a6ee0 GCS_MAVLink: add build option for deprecated MISSION_REQUEST
replaced by MISSION_REQUEST_INT
2023-10-17 10:40:12 +11:00
Peter Barker 1ece48b2b3 GCS_MAVLink: handle MAV_CMD_DEBUG_TRAP as both long and int 2023-10-17 10:25:45 +11:00
Peter Barker 659db36efe GCS_MAVLink: accept accel cal vehicle positions as both int and long 2023-10-12 20:39:32 +11:00
Peter Barker ce1bb64686 GCS_MAVLink: handle EKF_SOURCE_SET as both long and int 2023-10-11 18:37:02 +11:00
Peter Barker 57c2f7b2de GCS_MAVLink: handle DO_AUX_FUNCTION as both long and int 2023-10-04 19:01:22 +11:00
Peter Barker 423a88f9cd GCS_MAVLink: handle message interval commands as both long and int 2023-10-03 10:12:21 +09:00
Peter Barker ef8cd449ec GCS_MAVLink: handle MAV_CMD_DO_FLIGHTTERMINATION as both long and int 2023-09-27 11:27:45 -07:00
Peter Barker 0f6bf8994f GCS_MAVLink: handle MAV_CMD_AIRFRAME_CONFIGURATION as both LONG and INT 2023-09-26 11:37:42 +10:00
Peter Barker b44682d1a6 GCS_MAVLink: handle CAN_FORWARD as both command_INT and COMMAND_LONG 2023-09-20 17:50:56 +10:00
Peter Barker 5b0393e280 GCS_MAVLink: handle MAV_CMD_PREFLIGHT_REBOOT_SHUTDOWN as INT or LONG 2023-09-19 11:16:10 +10:00
Peter Barker 4f0b328674 GCS_MAVLink: support preflight calibration via command_int 2023-09-13 17:24:07 +10:00
Peter Barker ed5da4ead2 GCS_MAVLink: allow more libraries to compile with no HAL_GCS_ENABLED 2023-09-05 22:23:51 +10:00
Peter Barker fe512f7074 GCS_MAVLink: handle servo/relay events as both command_long and command_int 2023-08-29 11:15:14 +10:00
Asif Khan e3f0904616 GCS_MAVLink: move handling of all do-set-roi to AP_Mount library 2023-08-26 17:55:53 +10:00
Peter Barker a2d5244b10 GCS_MAVLink: accept mount commands as command_int 2023-08-24 22:07:12 +10:00
Peter Barker b141cca3d5 GCS_MAVLink: pass mavlink_message_t to handle_command_*_packet
the "special case" blocks are getting longer and longer.  Merge the switch statements for the command type to be handled by passing around the message.
2023-08-22 10:11:33 +10:00
Peter Barker 808fcbda0e GCS_MAVLink: fix airspeed cal / format commands via non-USB telemetry 2023-08-15 08:13:32 +10:00
Peter Barker 13c83ee9f8 GCS_MAVLink: enable sending of RELAY_STATUS message 2023-08-09 07:44:07 +10:00
Peter Barker d6979e62f0 GCS_MAVLink: handle mag cal as both COMMAND_LONG and COMMAND_INT 2023-08-08 10:06:13 +10:00
Peter Barker 8d30f84e73 GCS_MAVLink: move definition of HAL_HIGH_LATENCY2_ENABLED into config 2023-08-03 13:09:23 +10:00
Peter Barker ae8d3724cd GCS_MAVLink: convert to COMMAND_INT to handle MAV_CMD_DO_SET_HOME 2023-07-18 09:10:26 +10:00
Peter Barker f3e5e28364 GCS_MAVLink: zero structured passed in to convert_COMMAND_LONG_to_COMMAND_INT 2023-07-12 18:51:07 +10:00
Peter Barker 527f3d5728 GCS_MAVLink: add infrastructure to handle command longs as command ints 2023-07-12 18:51:07 +10:00
Andrew Tridgell 7fa0de37c3 GCS_MAVLink: added mutex deadlock test code 2023-06-27 10:11:46 +10:00
Peter Barker e3c4d9fd23 GCS_MAVLink: allocate mavlink status and send buffers dynamically
This makes ArduPilot responsible for supplying buffers to the mavlink layer, rather than that layer allocating them based on MAVLINK_COMM_NUM_BUFFERS.

We will want to rename MAVLINK_COMM_NUM_BUFFERS to AP_GCS_MAX_BACKENDS at some stage.
2023-06-21 17:50:31 +10:00
Andrew Tridgell fc904011fb GCS_MAVLink: moved MAV_CMD_AIRFRAME_CONFIGURATION from copter 2023-06-21 17:38:28 +10:00
Andrew Tridgell 1ab278d127 GCS_MAVLink: support EXTERNAL_POSITION_ESTIMATE command_int 2023-06-06 15:19:12 +10:00
Peter Barker 92942137fa GCS_MAVLink: remove use of AP_Mount.h from headers 2023-05-29 09:08:55 +10:00
davidsastresas e4428f538d GCS_MAVLink: support gimbal_manager_status and do_gimbal_manager_configure
Co-authored-by: Randy Mackay <rmackay9@yahoo.com>
2023-05-17 12:38:49 +10:00
Peter Barker d46d2189ec GCS_MAVLink: replace HAVE_FILESYSTEM_SUPPORT with backend defines 2023-05-17 09:40:39 +10:00
Peter Barker feaed97601 GCS_MAVLink: deprecate handling of MAV_CMD_REQUEST_AUTOPILOT_CAPABILITIES
AUTOPILOT_VERSION - the message this returns - can be requested with MAV_CMD_REQUEST_MESSAGE
2023-04-26 20:34:42 +10:00
Peter Barker d0b96d4cd9 GCS_MAVLink: deprecate handling of AUTOPILOT_VERSION_REQUEST
This can be done equivalently with MAV_CMD_REQUEST_MESSAGE
2023-04-26 20:34:42 +10:00
Randy Mackay bdb3618de7 GCS_MAVLink: support requests for gimbal-manager-information 2023-04-25 15:07:35 +10:00
Michael du Breuil a9d696752d GCS_MAVLink: Factor accel cal work out to INS library 2023-04-21 21:33:16 +10:00