Commit Graph

158 Commits

Author SHA1 Message Date
Josh Henderson 678fe0480a AP_NavEKF2: Fix #17789 core's EKF origin altitude different if flying 2021-07-04 08:19:10 +10:00
Josh Henderson 4e119ddeec AP_NavEKF2: non_GPS modes ensure EKF origin set only once and stays in sync
ekf2
2021-07-04 08:19:10 +10:00
Andrew Tridgell ea6724aca5 AP_NavEKF2: don't limit baro change when we are in fixed wing mode 2021-06-02 11:13:16 +09:00
Andrew Tridgell 32b079911f AP_NavEKF2: use DAL APIs for takeoff/touchdown expected 2021-06-02 11:13:16 +09:00
Peter Barker 5dff32422d AP_NavEKF2: remove separate calls to get delta-times for vel and ang 2021-03-13 11:29:29 +11:00
Andrew Tridgell 5e72907730 AP_NavEKF2: only fuse airspeed if healthy 2020-12-11 09:59:49 +11:00
Peter Barker d600b87454 AP_NavEKF2: make logging a core concern 2020-12-01 13:06:04 +11:00
Peter Barker 400ba7a9df AP_NavEKF2: move global state to be on the stack 2020-12-01 10:40:09 +11:00
Andrew Tridgell 7313e9eb0f AP_NavEKF2: removed inhibitGps and inhibitGpsVertVel options
these were unused
2020-12-01 10:33:50 +11:00
Andrew Tridgell 39ba8a8c83 AP_NavEKF2: convert to using common buffer classes
this saves a considerable amount of flash
2020-11-20 21:56:32 +11:00
Andrew Tridgell 7099bb6096 AP_NavEKF2: fixed gcc 9.3 build error
gcc 9.3 doesn't like the use of get_accel(i) when array length is 1
2020-11-13 14:30:11 +11:00
Andrew Tridgell 16f7e51ea5 AP_NavEKF2: fixed use of pointers in ringbuffers
these don't work with AP_DAL
2020-11-10 16:15:45 +11:00
Andrew Tridgell 5f0e943f0f AP_NavEKF2: use dal reference in EKF backends
saves a bit of flash space
2020-11-10 16:15:45 +11:00
Andrew Tridgell bec095d661 AP_NavEKF2: support replay with external navigation data 2020-11-10 16:15:45 +11:00
Andrew Tridgell 224792b8b8 AP_NavEKF2: added optflow support for AP_DAL 2020-11-10 16:15:45 +11:00
Andrew Tridgell 6be3d19e82 AP_NavEKF2: convert to use AP_DAL for new replay structure
Co-authored-by: Peter Barker <pbarker@barker.dropbear.id.au>
2020-11-10 16:15:45 +11:00
Andrew Tridgell 35e95d3328 AP_NavEKF2: reset body mag variances at key points
reset on sensor switch or when changing to 3D fusion
2020-09-20 09:25:57 +10:00
Andrew Tridgell d6dcbda0d3 AP_NavEKF2: removed duplicate compass switch check
left over from last set of changes
2020-09-20 09:25:57 +10:00
Paul Riseborough da7bb44a61 AP_NavEKF2: Consolidate magnetometer timeout checks 2020-09-08 11:01:14 +10:00
Andrew Tridgell 6b9e595602 AP_NavEKF2: fixed handling of failed compass
when a compass goes unhealthy due to sensor failure we should try
another compass after 10s if another compass is available
2020-09-08 11:01:14 +10:00
Andrew Tridgell 83e5639225 AP_NavEKF2: apply min GPS accuracy at measurement point
this fixes an issue a RTK GPS gives 1cm horizontal and vertical
accuracy and that causes the variances to get too small
2020-08-21 07:40:13 +10:00
Peter Barker 032b7c81e5 AP_NavEKF2: correct includes 2020-08-07 19:20:07 +10:00
Dr.-Ing. Amilcar do Carmo Lucas 83dc46d539 AP_NavEKF2: fix vertical flyaways when rangefinder stops providing data 2020-06-24 21:16:50 +09:00
Randy Mackay 989ffb79cd AP_NavEKF2: minor format fix 2020-06-19 13:46:52 +09:00
Randy Mackay 966d59a26d AP_NavEKF2: protect against ExtNav being NaN 2020-06-19 13:46:52 +09:00
chobits e64c92b322 AP_NavEKF2: use err info from ext nav interface 2020-06-09 13:31:21 +09:00
Randy Mackay 6c10655059 AP_NavEKF2: accept extnav at up to 50hz 2020-06-09 09:42:14 +10:00
chobits dee095b4a4 AP_NavEKF2: support VISION_SPEED_ESTIMATE 2020-06-01 17:51:24 +09:00
Randy Mackay f26a2a47b4 AP_NavEKF2: writeExtNavData accepts delay 2020-05-15 10:07:52 +09:00
Paul Riseborough e1f27054d5 AP_NavEKF2: Don't use geomag data when user specifies declination 2020-04-28 11:42:31 +09:00
Andrew Tridgell c83e2d7c0e AP_NavEKF2: fixed loss of GPS fusion
we must not do a storedGPS.recall unless we will be using the data,
otherwise we will lose GPS samples and risk stopping GPS fusion
2020-04-24 09:43:23 +10:00
Andrew Tridgell 3edbe81b1e AP_NavEKF2: removed 2nd set of imuSampleTime_ms 2020-04-24 09:43:23 +10:00
Paul Riseborough de0040ad69 AP_NavEKF2: Enable use of EKF-GSF yaw estimate
Enables the yaw to be reset in flight to a value estimated from a specialised yaw estimator. This allows faster recovery if taking off with a bad magnetometer and also allows yaw alignment and GPS use to commence in-air when operating without any yaw sensing.

AP_NavEKF2: Add missing accesor functions for default airspeed
2020-04-24 09:43:23 +10:00
Randy Mackay 8749f30c64 AP_NavEKF2: external nav pos offsets from AP_VisualOdom library 2020-04-14 10:28:03 +10:00
Randy Mackay fb7e68c53a AP_NavEKF2: writeExtNavData reset handles system time wrap 2020-04-14 10:28:03 +10:00
Peter Barker 903d81c263 AP_NavEKF2: use compass reference rather than repeatedly asking AHRS for it 2020-03-13 08:26:18 +11:00
Peter Barker 369292f7f3 AP_NavEKF2: stop relying on the presence of a RangeFinder 2019-12-11 08:09:01 +11:00
Andrew Tridgell fce4d6952f AP_NavEKF2: don't use WMM tables unless we have a compass scale factor set 2019-12-03 20:48:23 +11:00
Peter Barker 99689f65f8 AP_NavEKF2: adjust for renaming of RangeFinder files 2019-11-12 07:14:37 +08:00
Peter Barker 9735684184 AP_NavEKF2: use enum-class for RangeFinder Status 2019-11-09 08:01:53 +11:00
Peter Barker 3619856fc9 AP_NavEKF2: correct return of empty prearm string 2019-09-19 08:47:47 +09:00
Michael du Breuil a4d10b2e86 AP_NavEKF2: Allow the GPS to be responsible for logging 2019-09-10 09:09:17 +10:00
Andrew Tridgell 414d3eb670 AP_NavEKF2: don't fuse GPS when EK2_GPS_TYPE=3
when using a vision position system, the user may have vision derived
GPS data coming in using GPS_INPUT msgs. We should not fuse these when
EK2_GPS_TYPE=3 as we end up fusing both vision data and GPS data,
which does not work with the current EK2 code

This change makes it possible to run EK2 and EK3 in parallel in a
Vicon, wityh EK2 using VISION_POSITION_ESTIMATE data and EK3 using
GPS_INPUT (with yaw) data.
2019-08-26 12:27:31 +10:00
Andrew Tridgell c57b25b4c9 AP_NavEKF2: ensure that EKF origin stays in sync on all cores
this prevents the EKF origin on different cores from being initialised
to different values. A common value is stored in the frontend and used
by a core if it doesn't have an origin
2019-07-29 10:08:22 +10:00
Andrew Tridgell 2427440e13 AP_NavEKF2: origin handling fixes from Francisco 2019-07-11 06:40:55 +10:00
Andrew Tridgell 9372073f63 AP_NavEKF2: continuously update gpsGoodToAlign
use it to determine how to handle a height datum reset
2019-07-07 19:20:32 +10:00
Andrew Tridgell 1c4c5a6850 AP_NavEKF2: learn gyro biases for inactive gyros
this allows us to learn the gyro biases each lane would need if it had
to switch to another gyro due to a sensor failure. This prevents a
sudden change in gyro bias on IMU failure
2019-07-07 19:03:01 +10:00
Peter Barker 82df167ad4 AP_NavEKF2: use beacon singleton 2019-07-01 07:20:58 +09:00
Michael du Breuil f04e47fc17 AP_NavEKF2: Reduce scope of AP_Baro.h 2019-06-27 14:56:21 +10:00
Michael du Breuil 892b687c09 AP_NavEKF2: Fix AP_GPS.h include 2019-06-18 10:02:05 +10:00