Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
49,402 Commits 70 Branches 507 Tags 664 MiB
Commit Graph

2650 Commits

Author SHA1 Message Date
Josh Henderson 9d32e481c2 Tools: locations.txt move Grand Canyon to better defined terrain data 2021-09-04 17:00:10 +10:00
Pierre Kancir 575c608688 Tools: allow to use sim_vehicle.py without pymavlink installed 2021-09-04 07:49:42 +10:00
Peter Barker e5c35d399c autotest: re-enable Heli spline waypoint test 
position controller has been completely rewritten, so the bug should be
gone now....
 2021-09-03 12:46:33 +10:00
Peter Barker b9d62e7ff2 autotest: add test for setting multiple messages to same rate 2021-09-02 09:24:11 +10:00
Peter Barker 42c2f8d9f3 Revert "Tools: comment out the FETtecESC_safety_switch() function for now because it is failing" 
This reverts commit d53299ecb0.
 2021-09-01 18:25:51 +10:00
TunaLobster 1df66731c8 Tools: Add rstlatexpdf emitter 2021-08-31 09:28:03 +10:00
Iampete1 dd031dd43e Tools: autotest: default_params: tri: set MOT_YAW_SV_ANGLE to 60 2021-08-28 10:32:59 +09:00
Iampete1 2fa24fa7da Tools: autotest: enable tailsitter for tailsitter test 2021-08-25 14:34:50 +01:00
yaapu 17cdb07bd5 Tools:autotest: added test for FRSky PassThrough WIND frame 0x500C 2021-08-25 17:13:16 +10:00
Gone4Dirt b4346ba5a3 Autotest: Update RPM in default params 2021-08-25 09:36:58 +10:00
Gone4Dirt fba15f3035 Autotest: Update RPM param. 2021-08-25 09:36:58 +10:00
Josh Henderson 695ad5b4f6 Autotest: BaroDrivers tighten leeway for pressure and temp deltas 2021-08-24 09:55:01 +10:00
TunaLobster 7d92ab1fb0 Tools: Fix emit.py regex 2021-08-23 14:44:27 +10:00
TunaLobster 6381297215 Tools: Move reboot required from table to note 2021-08-20 11:23:21 +10:00
Peter Barker c443a93b15 autotest: add grand-canyon location 2021-08-20 10:51:03 +10:00
Samuel Tabor 9f77d5ac9d autotest: fly_mission should respect mission_timeout when waiting for wps. 2021-08-19 17:59:33 +10:00
Samuel Tabor 3a185e7533 autotest: Add plane test for landing with barometer drift. 2021-08-19 17:59:33 +10:00
TunaLobster b5f7fca254 Tools: parameter emitter spelling pass 2021-08-19 10:00:16 +10:00
Josh Henderson 70166c8173 autotest: add battery_charge_state ok & low tests 2021-08-18 15:32:28 +10:00
Peter Barker 12ac5174d7 autotest: check battery_status.charge_state is critical on failsafe 2021-08-17 14:40:55 +10:00
Dr.-Ing. Amilcar do Carmo Lucas d53299ecb0 Tools: comment out the FETtecESC_safety_switch() function for now because it is failing 
I do not understand why it is failing, and failed at fixing it.
 2021-08-13 16:22:37 +10:00
Peter Barker 20f58afa93 Tools: complete rewrite of the ESC-configuration state machine 
Co-authored-by: Dr.-Ing. Amilcar do Carmo Lucas <amilcar.lucas@iav.de>

tidy message sending using templates
Calculate and enforce the minimum update period.
Disable unused features to save flash
forced time gaps between all transmits
correct ESC reset functionality
Avoid re-initialization repeatition
Make sure we stop FETtec if safety is on (ignore reverse) this reduces duplicated code
Error count calculation changed
   as the telemetry error count is absolute only the overflow status can be safed and used for the percentage calculation
Update the README to add autotests information
FETtec needs a time gap between frames
  This allows running at high fast_loop_rates
do not send fast_throttle data if a configuration command just got sent
Example parameter configuration file is for a Quadcopter with ESCs connected to Telem2
remove two FIXME
fix compilation in master
Fix the ESC not re-initializing issue.
  Now we re-init whenever we loose connection
RVMASK parameter changes only take effect when not armed
Improve documentation
Always use the same wording when referring to fast-throttle commands
fix pre-arm check message
assure the length of the memmove is positive
Set HAL_AP_FETTEC_CONFIGURE_ESCS to 0 when no ESC hardware is available and you want to test the UART send function
 2021-08-13 16:22:37 +10:00
Peter Barker e263063600 autotest: a gap in the beginning of the SERVO_FTW_MASK is now allowed, test it 
make sure the SERVO_FWT_MASK is valid:
  - it can have bit gaps between active channels, but channels higher than 12 are not allowed (AP_EST_TELEM limitation)
  - Explain that the FETtec ESC IDs inside the FETtec Firmware need to be contiguous and start at 1.
add tests for ESC power outages
add test that safety switch zeroes PWM for FETtec ESC
 2021-08-13 16:22:37 +10:00
Peter Barker 3bc4cf710f autotest: add test for FETtecESC 2021-08-13 16:22:37 +10:00
Peter Barker 0d4bee8f7b autotest: except QRTL/QLAND from airmode tests due to non-armability 
The test wasn't checking the return value for arming, so of course the
motors weren't spinning.... now we've fixed the checked-for-arming thing
these two modes were failing.
 2021-08-13 13:40:28 +10:00
Peter Barker 8fc6e98900 autotest: raise exception for arm/disarm failures on switch/rc 
Users were calling these without checking the return values. Make that
a non-issue
 2021-08-13 13:40:28 +10:00
Peter Barker 5e81026e78 autotest: add option to hard-reset after every test 2021-08-13 08:01:20 +10:00
Peter Barker 013bee99f4 autotest: rover: wait ready to arm before running motor test 2021-08-13 08:00:52 +10:00
Peter Barker d03cfb8615 autotest: Plane: wait for origin before enabling fence 
we load into memory as origin-relative positions
 2021-08-12 20:34:36 +10:00
Peter Barker cccec5c21c autotest: add test for FRSkyD battery 2021-08-11 15:17:43 +10:00
Peter Barker abb6521127 Revert "autotest: use SIM_STATE (common.xml) instead of SIMSTATE (ardupilotmega.xml)" 
This reverts commit 540a56adb8.

Polling this message caused issues on reboot - shouldn't be a problem
but is.

Retrying that showed that the Tracker GUIDED test failed reliably due to
a yaw problem.
 2021-08-07 16:18:05 +10:00
Peter Barker 44d5885d99 autotest: augment blending test to ensure GPS switch events make log 2021-08-06 15:30:18 +10:00
Andrew Tridgell 2b1e80c70d Tools: copy board_list.py for build_binaries.py 2021-08-06 10:00:08 +10:00
Peter Barker 540a56adb8 autotest: use SIM_STATE (common.xml) instead of SIMSTATE (ardupilotmega.xml) 
It is a useful superset
 2021-08-05 18:35:11 +10:00
Peter Barker 27fcb3a100 autotest: fix simstate error message 2021-08-05 18:35:11 +10:00
Peter Barker ca35d01baa autotest: move upload_simple_relhome_mission up 2021-08-05 10:38:03 +10:00
Josh Henderson 162b3b70cf Autotest: use MAV_POS_TARGET_TYPE_MASK, remove POS_TYPE_MASK_FORCE 2021-08-03 12:48:38 +10:00
Peter Barker 8e72dc32d1 autotest: add test home is restored persistently on wdog reset 2021-08-03 10:36:50 +10:00
Andrew Tridgell e6f15ed6c0 autotest: cope with WriteStreaming() in doc tests 2021-08-03 10:23:36 +10:00
Josh Henderson 1cb11a5ff2 Tools: autotest change smartbatt param names 2021-08-03 09:36:26 +10:00
Iampete1 27b324742e Tools: sim_vehicle: pass on slave comandline CMD 2021-08-03 09:22:19 +10:00
Andrew Tridgell a0da76243d autotest: reboot after AHRS_ORIENTATION test 
the EKF can be left very unhappy by this test
 2021-07-31 10:01:14 +10:00
Braedon O'Meara de91058b1a Tools: Add tmux support to run_in_terminal_window.sh 
Added in an option so that if running SITL in a tmux session it will open a new window in tmux.
More or less an alternate option to screen.
It will detect if its running in a tmux session by checking the $TMUX and $TERM env variables.
I put it before other options because when I am running a tmux session even in a GUI environment
I would prefer a new Tmux window compared to a new terminal.
This will only run if youre already in a tmux session it will not launch a new session.
 2021-07-30 12:05:15 +10:00
Peter Barker 2ae483cee0 autotest: stop uploading artifacts to autotest server 
github action's CI is good at this
 2021-07-30 11:32:59 +10:00
Peter Barker 7929122f49 autotest: improve AHRS trim test 2021-07-28 17:20:28 +10:00
Peter Barker 909decc5be autotest: move wait_attitude up to common.py 2021-07-28 17:20:28 +10:00
Peter Barker da3ff2c142 autotest: add test for live change of AHRS orientation 2021-07-27 17:28:09 +10:00
Peter Barker 04ddc9de03 autotest: correct order of progress vs action in set-param 2021-07-27 16:51:48 +10:00
Peter Barker e1884bcd6e autotest: run dumpstack/dumpcore on stuck SITL process 2021-07-27 16:51:48 +10:00
Paul Riseborough 9207744152 Tools: Rework Plane.EKFlaneswitch autotest 2021-07-22 18:20:45 +10:00