Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
52,217 Commits 71 Branches 509 Tags 790 MiB
Commit Graph

92 Commits

Author SHA1 Message Date
Iampete1 832ac24bb9 AP_Airspeed: rename get_health_failure_probability to get_health_probability 2022-03-10 07:40:57 +11:00
Joshua Henderson 3cfbad0f4d AP_Airspeed: add AP_AIRSPEED_ENABLED 2022-01-19 18:21:32 +11:00
Andrew Tridgell f65620f4f3 AP_Airspeed: allow for an AIRSPEED list in hwdef.dat 
this saves a lot of flash by only including specific drivers
 2021-09-21 13:51:40 +10:00
Peter Barker 16c11fc4fa AP_Airspeed: allow zero offset if we are skipping calibration 2021-09-15 17:52:34 +10:00
Andrew Tridgell 0bdd8231cf AP_Airspeed: added ARSPD_OPTIONS bit for disabling voltage correction 
if the MS4525 has its own LDO then we are should disable the
correction
 2021-07-12 17:14:59 +10:00
Andrew Tridgell ca1508b02e AP_Airspeed: added DEVID parameters for airspeed 
this makes log analysis easier
 2021-07-12 17:14:59 +10:00
Peter Barker 6da68e39f8 AP_Airspeed: add rc channel option to disable all airspeed sensors 2021-06-23 15:13:13 +10:00
Michael du Breuil 29d6900888 AP_Airspeed: Remove unneeded initilization 
We pre zero all memory
 2021-06-22 10:08:02 +10:00
Peter Barker 00002b78a4 AP_Airspeed: remove HIL support 2021-06-15 09:47:31 +10:00
QioTek 0190a42e47 AP_Airspeed: added ASP5033 driver 2021-03-28 07:50:34 +11:00
Andrew Tridgell 857d905d9f AP_Airspeed: added MSP backend 2020-12-08 20:41:12 +11:00
Hwurzburg 615b8add8c AP_Airspeed: add inflight airspeed cal rc switch 2020-11-25 21:30:15 +11:00
Iampete1 2aff8787c1 AP_Airspeed: add NMEA water speed backend 2020-10-27 11:24:49 +11:00
Iampete1 662d4640ef AP_Airspeed: add dedicated MAX_WIND param 2020-10-27 11:21:04 +11:00
Andrew Tridgell 505953bdb2 AP_Airspeed: added get_num_sensors() 2020-08-27 20:20:51 +10:00
Josh Welsh eb4b5fb720 AP_Airspeed: Add additional DLVR support 20inH2O 30inH2O 60inH2O 2020-08-12 08:02:49 +10:00
Michael du Breuil ceb0a9c827 AP_Airspeed: Rearrange state to save memory 
Saves 8 bytes per airspeed sensor (2 backends for 8 total), and removes
the unneeded width specifier, which has no impact on used memory, and
saves us 88 bytes of flash because we don't have to do work to shift the
bits around.
 2020-05-06 18:15:08 +10:00
Andrew Tridgell 0f6f684bab AP_Airspeed: expose get_corrected_pressure() 
needed for AP_Periph
 2020-03-25 20:37:00 +11:00
Andrew Tridgell f51378f2e8 AP_Airspeed: enable for use in AP_Periph 2019-10-21 19:12:01 +11:00
Andrew Tridgell c173f8e24d AP_Airspeed: support both 5inH2O and 10inH2O versions of DLVR sensor 
useful for faster aircraft
 2019-07-19 21:39:30 -07:00
Michael du Breuil e43605cc9b AP_Airspeed: Remove a number of unneeded top level includes 2019-06-27 14:56:21 +10:00
Peter Barker 5cfba85095 AP_AirSpeed: take EAS2TAS directory from baro; use for all backends 
Plane was only setting EAS2TAS in the primary frontend; calibration
expected it to be set on each instance.
 2019-06-06 12:44:36 +10:00
Peter Barker f0379ff7f0 AP_Airspeed: move logging of ARSP into Airspeed library 2019-04-09 09:29:35 +10:00
Peter Barker 59ef486da0 AP_Airspeed: add AP::airspeed() to get airspeed singleton 2019-04-09 09:29:35 +10:00
Peter Barker c25ce2cee8 AP_AirSpeed: move sending of airspeed_autocal into AP_AirSpeed 2019-03-06 11:32:52 +11:00
Tom Pittenger 74299906b1 AP_Airspeed: log health failure probability 2019-02-03 08:25:46 -08:00
ChrisBird c9af223579 AP_Airspeed: Renaming the check method name and readding the overall option check. This will set it up for future options. 2019-02-03 08:25:46 -08:00
Tom Pittenger 1a04a540f5 AP_Airspeed: convert the defines into static consts 
- also perform logging at end of update
- convert Options Mask into an enum
 2019-02-03 08:25:46 -08:00
ChrisBird d77906cb06 AP_Airspeed: This adds the ability to turn off and on the airspeed sensor if faulty. 2019-02-03 08:25:46 -08:00
DOMINATOR\Eugene c81f9e6baa AP_Airspeed: update data with logging 2018-11-17 07:52:42 +11:00
liang.tang 653766c4cc AP_Airspeed: uavcan airspeed supported 2018-09-05 17:22:08 +10:00
Michael du Breuil f2b4e06a1a AP_Airspeed: Add 5"H2O DLVR differential sensor driver 2018-08-08 09:07:17 +10:00
Michael du Breuil abd5bffda5 AP_Airspeed: Clean up some comments, prevent a potential out of range access 2018-05-29 00:10:40 +01:00
Michael du Breuil a46c60f4de AP_Airspeed: Create a singleton 2018-03-21 13:36:35 +00:00
Tom Pittenger b1a4540359 Revert "AP_Airspeed: blending of several sensors and failure recognition" 
This reverts commit 26c7614118.
 2018-03-09 13:12:05 -08:00
Eugene Shamaev 26c7614118 AP_Airspeed: blending of several sensors and failure recognition 2018-03-09 11:27:20 -08:00
Andrew Tridgell 58b0ac07ec AP_Airspeed: support dual airspeed sensors 
allow for a primary and secondary airspeed sensor
 2018-01-16 07:14:20 +11:00
rde-mato 87e3777f67 AP_Airspeed: added SDP3X airspeed sensor driver 2018-01-16 07:14:20 +11:00
Michael du Breuil 5fedc65efb AP_Airspeed: Allow specifying the MS5525 address 2018-01-10 17:49:35 +00:00
Peter Barker 1e512338f9 AP_AirSpeed: clarify comment 2017-11-23 10:40:30 +11:00
Mark Whitehorn f32f51f843 AP_Airspeed: eliminate airspeed positive bias 2017-09-22 18:21:09 +10:00
Andrew Tridgell 7b73004882 AP_Airspeed: added ARSPD_USE=2 for gliders 2017-05-04 22:59:02 -07:00
Andrew Tridgell 43bac678cd AP_Airspeed: Added MS5525 airspeed driver 
also improved averaging in MS4525 driver
 2016-12-05 16:51:49 -08:00
Andrew Tridgell 14a1f559c7 AP_Airspeed: added ARSPD_TYPE and use standard driver backend methods 
this will allow for new sensor types
 2016-12-05 16:51:49 -08:00
Andrew Tridgell 497b87fa65 AP_Airspeed: switched to in-tree I2C driver for all boards 2016-11-09 17:07:59 +11:00
Mathieu OTHACEHE 152edf7189 Global: remove mode line from headers 
Using a global .dir-locals.el file is a better alternative than
reincluding the same emacs header in every file of the project.
 2016-10-24 09:42:01 -02:00
Tom Pittenger ce7b766d8b AP_Airspeed: remove AP_Vehicle::FixedWing dependency 2016-08-08 00:02:42 -07:00
Tom Pittenger ae46c38ff7 AP_Airspeed: pass in max airspeed via function call instead of using aparm 2016-08-08 00:02:42 -07:00
Tom Pittenger 1586abab8d Revert "AP_Airspeed: Converted library to be stand-alone from APM:Plane." 
This reverts commit 5439257236.
 2016-08-07 17:54:24 -07:00
AndersonRayner 5439257236 AP_Airspeed: Converted library to be stand-alone from APM:Plane. 
Additional changes:
   ARSPD_FBW_MIN and ARSPD_FBW_MAX renamed to ARSPD_MIN and ARSPD_MAX
   ARSPD_MIN and ARSPD_MAX changed to floats
 2016-08-04 10:09:04 -07:00