Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
10,049 Commits 70 Branches 507 Tags 660 MiB
Commit Graph

1117 Commits

Author SHA1 Message Date
Andrew Tridgell 890b77447a Plane: allow integrator in stabilize mode when no stick input 
fixes issue #472
 2013-08-02 21:55:34 +10:00
Andrew Tridgell c083c15240 Plane: use a larger serial buffer 
this makes higher rate MAVLink possible again
 2013-08-02 18:46:54 +10:00
Andrew Tridgell c3b5f20a45 Plane: run TECS 50Hz code when throttle suppressed 
this fixes auto-launch detection using TECS
 2013-08-02 18:46:48 +10:00
Andrew Tridgell 8428779558 Plane: make it easier to find task numbers 2013-08-02 18:46:42 +10:00
Andrew Tridgell 62cc84aba3 Plane: use new scheduler load_average() function 
this also simplifies the main loop
 2013-08-02 18:46:28 +10:00
Andrew Tridgell 233b033e8c Plane: removed old speed/altitude control algorithms 
Use TECS only. This makes the code a lot simpler and easier to
properly document
 2013-07-22 13:28:11 +10:00
Andrew Tridgell c0697d0a2d Plane: mark 2.75beta1 2013-07-22 12:50:30 +10:00
Andrew Tridgell 965dc228c2 Plane: fixed GUIDED mode change of altitude down 2013-07-22 12:50:02 +10:00
Andrew Tridgell b8fa83ff54 Plane: change default slewrate to 100%/second 2013-07-22 12:50:02 +10:00
Andrew Tridgell 29c854e676 Plane: remove unused function 2013-07-22 12:50:02 +10:00
Andrew Tridgell 6e288551ab Plane: fixed reversion to pre-failsafe mode 
if AUTO was entered using GCS, we need to switch back to the old mode,
not control channel
 2013-07-22 12:50:02 +10:00
Andrew Tridgell 74dabad1f3 Plane: added SKIP_GYRO_CAL parameter 
useful for starting the sim at high altitudes, and for starting planes
without having to hold them still
 2013-07-22 12:50:01 +10:00
Andrew Tridgell c8a83e17d0 Plane: remove old AIR_START code 
this was never used or tested
 2013-07-22 12:50:01 +10:00
Andrew Tridgell 7673ca0bac Plane: updates for new EAS2TAS scaling 2013-07-22 12:50:01 +10:00
Andrew Tridgell 9bbe6c1967 Plane: update to new license boilerplate for GPLv3 
we had LGPLv2 in some places, despite the fw being GPLv3
 2013-07-22 12:50:01 +10:00
Andrew Tridgell 882aa68c16 Plane: use new airspeed calibration code 
Pair-Programmed-With: Paul Riseborough <p_riseborough@live.com.au>
 2013-07-22 12:50:01 +10:00
Andrew Tridgell 53b1b9b575 Plane: added note on type of airspeed in docs 2013-07-22 12:50:01 +10:00
Andrew Tridgell 2d5deddd30 Plane: set mode CIRCLE on short failsafe in AUTO 
this makes the code match the docs
 2013-07-22 12:50:00 +10:00
Andrew Tridgell 9b70675b12 Plane: check the control switch a bit more often 
faster response to mode changes
 2013-07-22 12:50:00 +10:00
Andrew Tridgell 6ed78c89ac Plane: don't read control switch when ch3 is in failsafe 
use ch3_counter not just the final flag
 2013-07-22 12:50:00 +10:00
Andrew Tridgell 51b9cf3e76 Plane: move failsafe variables into a structure 
this makes the logic a bit easier to follow
 2013-07-22 12:50:00 +10:00
Andrew Tridgell 608345415b Plane: pass aircraft parameters to attitude controllers 
also cope with rename of airspeed min/max variables

Pair-Programmed-With: Paul Riseborough <p_riseborough@live.com.au>
 2013-07-18 14:53:37 +10:00
Andrew Tridgell a4f49a28fb Plane: prepare for 2.74b release 2013-07-16 09:45:32 +10:00
Andrew Tridgell e27dd14bcc Plane: fixed FBWB aileron control 2013-07-16 09:44:23 +10:00
Andrew Tridgell e8355905dd Plane: prepare for 2.74 release 2013-07-15 11:19:38 +10:00
Andrew Tridgell dbd47b2a30 Plane: make TECS the default speed/height controller 2013-07-15 11:12:24 +10:00
Andrew Tridgell ec21922233 Plane: make wp_distance static 
removed hack in AP_Camera library
 2013-07-15 09:56:28 +10:00
Andrew Tridgell 3ba713352f Plane: use update_aux() for setting up extra channels 2013-07-15 09:56:12 +10:00
Andrew Tridgell ed20c4cbc8 Plane: fixed initial reporting of battery remaining 
we were not showing battery remaining 100% until we used some battery
 2013-07-14 21:59:15 +10:00
Andrew Tridgell e80d73df93 Plane: expand docs for TRIM_AUTO 2013-07-14 21:23:15 +10:00
Andrew Tridgell 4087fde140 Plane: enable CTUN log message by default 2013-07-14 21:10:12 +10:00
Andrew Tridgell e79023ceee Plane: fixed problem with slow ground station connects 
don't trigger the "scheduler out of time" code when in the delay
callback

Thanks to Marijm Slootweg for noticing this!
 2013-07-14 17:28:34 +10:00
Andrew Tridgell d4db2231d4 Plane: change to 2.73beta4 2013-07-13 21:47:22 +10:00
Andrew Tridgell dc024d425a Plane: re-do roll hanging in ACRO mode 
this avoids the euler angle zeros of the previous method by using a
gyro integrator on the roll axis

Pair-Programmed-With: Paul Riseborough <p_riseborough@live.com.au>
 2013-07-13 21:45:58 +10:00
Andrew Tridgell b37f79d307 Plane: update for new APM_Control API 2013-07-13 21:45:58 +10:00
Andrew Tridgell 113bc20f8a Plane: added a new CRUISE flight mode 
See
http://diydrones.com/group/apmusergroup/forum/topics/feature-request-hold-heading-mode

this fixes issue #438
 2013-07-13 21:45:58 +10:00
Andrew Tridgell 399970e76f Plane: fixed default deadzone for the throttle channel 
this is the 2nd half of the fix for issue #303
 2013-07-13 13:19:25 +10:00
Andrew Tridgell 826ad6c086 Plane: unlock roll and pitch when we enter ACRO mode 2013-07-13 12:34:34 +10:00
Randy Mackay 1772a62415 Plane: fix to gps present check in mavlink extended status 1 msg 2013-07-13 10:27:39 +09:00
Andrew Tridgell ea9ae31a7a Plane: fixed a bug with altitude drift in FBWB mode 
not taking account of deadzone correctly
 2013-07-12 21:17:09 +10:00
Andrew Tridgell cc57bfcf12 Plane: fixed handling of deadzone in ACRO mode 
RC_Channel norm_input() does not take account of the dead zone
 2013-07-12 17:54:51 +10:00
Randy Mackay 9df93881fb Plane: set_dead_zone renamed to set_default_dead_zone 
Change in use of parameter means value passed in should be 1/2 what it
was previously
 2013-07-12 11:44:18 +09:00
Andrew Tridgell f300df5fd1 Plane: added FS_LONG_TIMEOUT and FS_SHORT_TIMEOUT parameters 
this is to address the issue raised here:

http://diydrones.com/forum/topics/ardupilot-circle-mode
 2013-07-12 11:56:04 +10:00
Andrew Tridgell 73928b82a6 Plane: fixed FBWB airspeed control 
thanks to Gabor for reporting this!
 2013-07-11 11:58:54 +10:00
Andrew Tridgell 1d04290eab Plane: change to 2.74beta3 2013-07-11 11:58:54 +10:00
Andrew Tridgell 11a4628409 Plane: added ACRO mode to mode choices 2013-07-11 09:10:41 +10:00
Andrew Tridgell fc67f51901 Plane: added ACRO_ROLL_RATE and ACRO_PITCH_RATE parameters 
default to 180 degrees/second, which seems reasonable
 2013-07-11 09:10:41 +10:00
Andrew Tridgell 608007361b Plane: added initial implementation of ACRO mode 
rate based control with attitude locking
 2013-07-11 09:10:41 +10:00
Andrew Tridgell 2005d5642a Plane: fixed a documentation string 
GND_ALT_OFFSET is now for barometric corrections
 2013-07-10 14:46:22 +10:00
Andrew Tridgell 3c97fad2ec Plane: changes for GPS field changes 2013-07-10 14:04:22 +10:00
Andrew Tridgell 7aa360b176 Plane: added relative_altitude helper functions 
prevents some code duplication
 2013-07-10 14:04:22 +10:00
Paul Riseborough 971d36f06b Plane: added height to 10Hz TECS call 2013-07-10 14:04:22 +10:00
Andrew Tridgell 3c177867a4 Plane: allow enable/disable of camera log messages in CLI 2013-07-10 12:23:36 +10:00
Andrew Tridgell f7c8d1e1ee Plane: use current_loc.alt for altitude to TECS 2013-07-10 11:55:35 +10:00
Craig@3DR 7f4336430a Plane: trigger picture + logging on camera update_location() 2013-07-10 08:40:01 +10:00
Paul Riseborough a4f3180e2a Plane: added support for throttle nudging with TECS 2013-07-09 20:51:03 +10:00
Paul Riseborough c34803db13 Plane: pass in adjusted height above field to TECS 2013-07-09 09:25:55 +10:00
Andrew Tridgell 9f612f6f78 Plane: only call TECS when throttle is not suppressed 
this helps prevent integrator buildup on the ground
 2013-07-08 12:07:50 +10:00
Andrew Tridgell 1355b6d89d Plane: break-up scheduling into smaller pieces 
ensure mavlink sends don't push us over a scheduling boundary
 2013-07-05 18:05:27 +10:00
Andrew Tridgell 1d6748cf3f Plane: use a glide slope in RTL when descending 
when above the target altitude in RTL come down slowly, when below
climb rapidly

This fixes issue #39
 2013-07-05 14:56:58 +10:00
Andrew Tridgell d30dd7c3f1 Plane: only run TECS when in an auto-throttle mode 
this prevents integrator buildup in user controlled modes
 2013-07-05 14:55:22 +10:00
Andrew Tridgell dd330885b8 Plane: added compass and baro accumulate functions 2013-07-05 12:59:15 +10:00
Andrew Tridgell 84299c3747 Plane: document ALT_CTRL_ALG=2 2013-07-04 17:00:04 +10:00
Andrew Tridgell 6c7d160ee6 Plane: fixed TECS takeoff detection 2013-07-04 16:56:57 +10:00
Andrew Tridgell a5bda3ffef Plane: changed to using a "aircraft parameters" structure 
this structure can be passed to libraries to give them easy access to
critical user parameters
 2013-07-04 16:56:57 +10:00
Paul Riseborough d62636d309 Plane: added new TECS altitude controller 
Includes improvements to takeoff/launch detect logic to support hand
launching for X-8 flight
 2013-07-04 16:56:57 +10:00
Andrew Tridgell f3237b9e5d Plane: update FS_LONG_ACTN and FS_SHORT_ACTN docs 
thanks to Craig for noticing this
 2013-07-02 14:50:04 +10:00
Andrew Tridgell 75ef7c26e1 Plane: update takeoff course when conditions met 
This allows for change of heading before the final takeoff conditions
are met

thanks to Greg Fletcher for suggesting this
 2013-07-01 17:05:13 +10:00
Andrew Tridgell 570ecea6c6 Plane: added secondary rudder support 2013-06-29 17:31:03 +10:00
Andrew Tridgell 0d3faeda90 Plane: update_mount assumes 50Hz, for camera trigger 2013-06-25 12:44:26 +10:00
Andrew Tridgell bb47029564 Plane: enable CAM_TRIGG_DIST parameter 2013-06-25 12:44:26 +10:00
Andrew Tridgell 45f5d05bd2 Plane: enabled RELAY_* parameters 2013-06-25 12:44:26 +10:00
Andrew Tridgell 056e0ca40d Plane: APM2 doesn't have channel 9 PWM output 2013-06-24 13:06:54 +10:00
Paul Riseborough 2204b30e66 Plane: Added APM_Control integrator limits to table used to covert old PID values 2013-06-22 21:59:47 +10:00
Randy Mackay 6ea568d72a Plane: param description change for RC5 ~ RC11 
Reversing the order may avoid duplication of param descriptions in the
auto generated parameter web page
 2013-06-21 09:58:02 +09:00
Randy Mackay 75bcd7cdab Plane: update THR_FS_VALUE parameter description 2013-06-18 15:57:29 +09:00
Andrew Tridgell 4a0c90246e Plane: make GPS UART blocking again 2013-06-11 18:50:23 +10:00
Andrew Tridgell 641ad6bc63 Plane: increase time allowed for update_alt() 
the altitude tracking code can be quite expensive with TECS
 2013-06-07 08:41:09 +10:00
Andrew Tridgell b0c87b8a61 Plane: fix VOLT_DIVIDER docs 2013-06-07 08:40:28 +10:00
Andrew Tridgell b27ffdd087 Plane: new plane beta 2.74beta2 2013-06-04 15:10:11 +10:00
Andrew Tridgell c008fa764c Plane: update_commands() can take 7ms if it needs to write a waypoint 2013-06-04 13:42:25 +10:00
Andrew Tridgell 93cd0f9a31 Plane: switch to new AP_Scheduler 
this gives us more accurate task scheduling in ArduPlane, plus better
monitoring of task timing (via SCHED_DEBUG)
 2013-06-04 13:34:58 +10:00
Andrew Tridgell 6bac13f9e2 Plane: fixed RCMAP_* to fix channel ranges for no-reboot changes 2013-06-03 21:20:39 +10:00
Andrew Tridgell 02d72ffcba Plane: make it possible to change board orientation at runtime 2013-06-03 16:52:44 +10:00
Andrew Tridgell 4c9bc30f58 Plane: make it possible to change control channel ordering without reboot 
this makes configuration a bit easier
 2013-06-03 16:42:38 +10:00
Andrew Tridgell 27bc0cdc2c Plane: rename old channel_* globals 
prevent the old "g." names from being used
 2013-06-03 16:37:51 +10:00
Andrew Tridgell a1f64d606a Plane: fixed remaining places where primary channel ordering was assumed 
should now use rcmap for all inputs
 2013-06-03 16:23:48 +10:00
Andrew Tridgell fb9bf21522 Plane: allow channel mapping of first 4 channels 
this makes it easier to support DSM and SBUS radios
 2013-06-03 16:23:48 +10:00
Andrew Tridgell 515d726ee0 Plane: use RC_Channel::rc_channel() instead of rc_ch[] 2013-06-03 16:23:48 +10:00
Andrew Tridgell f7697574db Plane: use the new airspeed driver interface 
the choice of analog source is now in the airspeed driver
 2013-06-03 11:51:09 +10:00
Andrew Tridgell d9bcfd913a Plane: reset attitude integrators on mode change 2013-06-01 22:29:38 +10:00
Andrew Tridgell bb3171ab5f Plane: zero attitude integrators on the ground 2013-06-01 22:29:38 +10:00
Andrew Tridgell cd55ed45e2 Plane: removed the old roll/pitch/yaw PID controllers 
use the new controllers, with auto parameter conversion
 2013-05-31 14:06:56 +10:00
Andrew Tridgell 91a04ab654 Plane: fixed headers for mode logging 2013-05-31 14:04:03 +10:00
Andrew Tridgell cae1079747 Plane: auto-convert the old RLL2SRV* parameters to the new CTL_RLL_* parameters 2013-05-31 07:58:29 +10:00
Andrew Tridgell e48b8c7b4a Plane: improve RTL altitude docs 2013-05-31 07:58:29 +10:00
Andrew Tridgell 6e0f1f56de Plane: update docs on volt/current pin 2013-05-31 07:57:15 +10:00
Andrew Tridgell fa9eb84542 Plane: added more parameter docs (flaps and GCS control) 2013-05-30 09:44:09 +10:00
Andrew Tridgell de904468b2 Plane: added BATT_MONITOR and VOLT_DIVIDER docs 2013-05-30 09:06:36 +10:00
Andrew Tridgell eba7d6da9a Plane: removed the old crash_timer code 
This code is less relevent with the new L1 navigation, and could cause
issues with the pilot not having control after a long dive.

Thanks to Soren for pointing out the issues

See issue #305
 2013-05-28 11:19:28 +10:00
Andrew Tridgell f9a1b4f0e3 Plane: improve ALT_MIX docs 2013-05-28 10:10:22 +10:00
Andrew Tridgell 767d9d0eb5 Plane: fixed stick mixing in AUTO modes 
the mixing was asymmetric. Many thanks to Soren Kuula for noticing this!
 2013-05-27 08:24:35 +10:00
Andrew Tridgell c481ac8745 Plane: use a default mixing gain of 0.5 
this ensures compatibility with existing configs
 2013-05-25 19:15:47 +10:00
Andrew Tridgell c81421e275 Plane: added MIXING_GAIN parameter 
this allows for the full range of output on both channels, but can
saturate
 2013-05-25 18:28:13 +10:00
Andrew Tridgell a22f5e3bc4 Plane: enable wind estimation 2013-05-24 11:21:42 +10:00
Andrew Tridgell dd633fcf3f Plane: make voltage and battery capacity failsafe settable at runtime 
this also fixes issue #292
 2013-05-22 20:33:57 +10:00
Randy Mackay 4c08e32bf6 Plane: param update for AP_Baro 2013-05-21 14:22:23 +09:00
Randy Mackay 84909ee56a Plane: add parameter description for LOG_BITMASK 2013-05-21 11:22:11 +09:00
Randy Mackay c7961a72fc Plane: send_text_P bug fix for short messages 2013-05-20 12:51:16 +09:00
Andrew Tridgell bd4b7d136f Plane: mark ArduPlane 2.74beta 2013-05-13 17:32:33 +10:00
Andrew Tridgell 001d18b51d Plane: removed scaling of pitot source 2013-05-13 15:19:05 +10:00
Andrew Tridgell 97b6aaac77 Plane: use voltage_average() for RSSI 
this fixes it on PX4
 2013-05-13 15:19:05 +10:00
Andrew Tridgell b940c4b28e Plane: use library gcs_severity 2013-05-09 09:28:57 +10:00
Andrew Tridgell 635b3fabda Plane: fixed APM1-1280 build 2013-05-08 21:44:45 +10:00
Andrew Tridgell 81c1fd5fc4 Plane: support 3D accel calibration over MAVLink 2013-05-08 16:25:35 +10:00
Andrew Tridgell c5f1570f32 Plane: fixed flash logging of ATT 
fixed types to be int16
 2013-05-08 14:21:32 +10:00
priseborough 854c50501d Plane: Added a constraint to demanded bank angle during FBW-A mode to prevent roll limits being exceeded 2013-05-07 11:01:05 +10:00
Andrew Tridgell fdd509a7c1 Plane: move baro init earlier in startup 
this ensures it is initialised when CLI takeover by MP happens

Thanks to Prof Avi Levi for reporting this bug
 2013-05-06 10:57:57 +10:00
Andrew Tridgell 0cf49308af Plane: mark a 2.73beta release 2013-05-05 22:36:22 +10:00
Andrew Tridgell 0e6a64fc14 Plane: reset roll/pitch integrators for APM_Control in takeoff 
when airspeed is below airspeed minimum. This is consistent with the
previous controllers

Pair-Programmed-With: Paul Riseborough <p_riseborough@live.com.au>
 2013-05-05 22:03:13 +10:00
Andrew Tridgell 9c6f80c42b Plane: moved some default values to Parameters.pde 2013-05-05 21:51:09 +10:00
Andrew Tridgell 6251d0510a Plane: obey pitch trim and throttle pitch feed forward in new controllers 
Pair-Programmed-With: Paul Riseborough <p_riseborough@live.com.au>
 2013-05-05 21:51:09 +10:00
Andrew Tridgell e87a6d5564 Plane: added links to new APM controller docs 2013-05-05 21:51:09 +10:00
Andrew Tridgell 11ad9d5a2d Plane: auto-invert pitch control when upside down 
this helps to recover when flying inverted, for example when in manual
and hitting the lower altitude geofence
 2013-05-05 21:51:09 +10:00
Andrew Tridgell 4e2b88f6e6 Plane: added ATT_CONTROLLER option to select attitude controller 
set to 1 for the new APM_Control library
 2013-05-05 21:51:09 +10:00
Andrew Tridgell 55f7d18979 Plane: avoid copying the DCM matrix 2013-05-05 21:51:09 +10:00
priseborough 3663426550 Plane: Fixed bug in groundspeed_undershoot that could cause a fly-away in windy conditions. 
Use the component of velocity in the forward direction rather than the magnitude
 2013-05-05 21:51:08 +10:00
Paul Riseborough 663951d9a7 Plane: rename APM_Control parameters 
this groups the parameters more logically
 2013-05-05 21:51:08 +10:00
Paul Riseborough 8c5b603848 Plane: use new APM_Control API 2013-05-05 21:51:08 +10:00
Andrew Tridgell b43712e4d2 Plane: fixed APM1-1280 build 2013-05-03 12:40:43 +10:00
Andrew Tridgell 9f0a4dd553 Plane: log GCS text messages to flash log 
useful for seeing more complex actions
 2013-05-03 11:16:50 +10:00
Andrew Tridgell bb8f9d5443 Plane: simplify setHIL for baro 2013-05-02 15:27:02 +10:00
Andrew Tridgell 3cd52a9689 Plane: fixes for AP_Baro_HIL 2013-05-02 15:09:27 +10:00
Andrew Tridgell 0d97f417ec Plane: enable compass on all boards by default 
if not present, then mag init will fail and it will disable
 2013-05-02 15:01:33 +10:00
Andrew Tridgell 0aa38a5bd4 Plane: use new HIL compass API 2013-05-02 15:00:59 +10:00
Andrew Tridgell 5ba171af9a Plane: fixed mavlink levelling 
this was broken by a recent commit (after 2.72 was released)
 2013-05-02 13:38:28 +10:00
Andrew Tridgell a019e3740e Plane: updates for new compass API 2013-05-02 12:48:14 +10:00
Andrew Tridgell 9584aa89d9 Plane: replaced constrain() with constrain_float() 2013-05-02 10:27:10 +10:00
Randy Mackay b0f5b9a4cf Plane: use renamed RCInput valid_channels 2013-04-29 15:06:38 +09:00
Andrew Tridgell de3fcbc413 Plane: removed the MANUAL_LEVEL option 
levelling on every startup is far too error prone. This was just
another parameter that everyone changed.
 2013-04-29 14:19:53 +10:00
Andrew Tridgell 3d7a4d0e6e Plane: added ELEVON_OUTPUT option 
this is like the vtail mixer, but for elevons
 2013-04-29 12:13:59 +10:00
Andrew Tridgell 855277fa85 Plane: get ready for 2.72 release 2013-04-28 15:56:30 +10:00
Andrew Tridgell bdf0a2da69 Plane: log mode number as well as mode string 
this makes graphing mode changes easier
 2013-04-28 14:58:13 +10:00
Andrew Tridgell b53e3bb1fc Plane: log GPS messages as they come in 
stops us logging duplicate messages
 2013-04-28 14:56:31 +10:00
Andrew Tridgell 1956d9c2dc Plane: show modes as strings in log 2013-04-28 14:47:59 +10:00
Randy Mackay f47a2e951a Plane: add I2C error count to PM message 2013-04-26 22:39:56 +09:00
Andrew Tridgell 0b8c2da4df Plane: support 12 output channels on PX4 2013-04-25 20:10:53 +10:00
Andrew Tridgell 4f225eff57 Plane: if airspeed enabled, require 5m/s to unsuppress throttle 2013-04-25 20:10:53 +10:00
Andrew Tridgell ac7561c5d5 Plane: mark 2.72beta version 2013-04-24 16:19:18 +10:00
Andrew Tridgell 8ec1eaa8b1 build: removed obsolete cmake rules 
these have not been maintained for over a year
 2013-04-23 11:07:53 +10:00
Andrew Tridgell e446f375a7 Plane: set loiter.direction for GUIDED mode 2013-04-21 23:46:35 +10:00
Bill Bonney 3ec891265f Plane: Enable CURRENT logging by default onto Dataflash 2013-04-21 07:24:02 +10:00
Andrew Tridgell 02ed37e750 Plane: fixed APM1-1280 build 2013-04-20 18:21:19 +10:00
Andrew Tridgell 2e5834cc7f Plane: print flight mode as string in logs 2013-04-20 15:18:10 +10:00
Andrew Tridgell 3b90c6c386 Plane: log parameter changes 2013-04-20 13:52:36 +10:00
Andrew Tridgell 991d6598ef Plane: log board voltage 2013-04-20 13:52:36 +10:00
Andrew Tridgell 5c553852ed Plane: when logging is disabled don't include DataFlash at all 2013-04-20 13:52:36 +10:00
Andrew Tridgell 0c5b393919 Plane: added compass logging 2013-04-20 13:52:36 +10:00
Andrew Tridgell c56f338fe0 Plane: convert to new logging system 2013-04-20 13:52:36 +10:00
Andrew Tridgell c8af70a18d Plane: make the plane code compatible with the new logging system 
not actually converted yet
 2013-04-20 13:52:36 +10:00
Andrew Tridgell a329e32ccb Plane: added gps status to flashlog 2013-04-19 10:24:20 +10:00
Andrew Tridgell abe4dba871 Plane: added PX4 flash logging 2013-04-17 21:35:27 +10:00
Andrew Tridgell a12323c9fd Plane: fixed logging for new API 2013-04-17 21:34:56 +10:00
Andrew Tridgell 42344455c9 Plane: fixed structure init for arduino compiler 2013-04-15 21:59:07 +10:00
Andrew Tridgell 9f0f482dd7 Plane: fixed LOITER_TIME to start when loiter starts 
thanks to Paul Riseborough for finding this bug!
 2013-04-15 21:39:14 +10:00
Andrew Tridgell 75f4a43e2d Plane: fixed LOITER_TURNS command 
and cleanup more loiter variables
 2013-04-15 21:31:11 +10:00
Andrew Tridgell 82cd391cf8 Plane: use RADIUS_OF_EARTH define 2013-04-15 14:55:58 +10:00
Andrew Tridgell 8f091e70c8 Plane: move elevon variables into a structure 2013-04-15 14:53:56 +10:00
Andrew Tridgell 79c6f32400 Plane: made variables static and remove initial rc overrides 
minor code size savings
 2013-04-15 14:46:01 +10:00
Andrew Tridgell e918293e86 Plane: explain verify_*() commands 2013-04-15 14:41:15 +10:00
Andrew Tridgell 19b92b5bd8 Plane: removed "circle waypoint" completion test 
this is redundent with the location_passed_point() test
 2013-04-15 14:39:18 +10:00
Andrew Tridgell 994d8e354a Plane: allow for negative WP_LOITER_RAD for conter-clockwise loiter 
this follows the same convention as missions
 2013-04-15 10:52:32 +10:00
Andrew Tridgell 78538d0543 Plane: removed old HDNG2RLL PID control 
not used with L1
 2013-04-15 10:52:32 +10:00
Andrew Tridgell b2ad43f625 Plane: removed ahrs.set_barometer() 2013-04-15 10:52:32 +10:00
Andrew Tridgell 8d2cf6f3e5 Plane: update author list 2013-04-12 22:01:41 +10:00
priseborough 70a186464b Plane: added LEVEL_ROLL_LIMIT parameter 
this replaces both TKOFF_HEAD_HOLD and RUDDER_STEER, allowing users to
instead select a roll limit for takeoff and landing
 2013-04-12 21:59:52 +10:00
Andrew Tridgell 575f346e85 Plane: removed HIL_MODE_ATTITUDE 
we really need full sensors for HIL with the L1 controller. The flight
is also _much_ better with sensors HIL.
 2013-04-12 17:44:40 +10:00
Andrew Tridgell 11eb0cfce1 Plane: update for new AP_Navigation controller class 
this switches ArduPlane over to use the L1 navigation controller, via
a generic nav_controller object pointer.

Note that the nav_controller controls all types of navigation now,
including level flight and heading hold. This provides a cleaner
abstraction than the old method of special case navigation handling

Pair-Programmed-With: Paul Riseborough <p_riseborough@live.com.au>
 2013-04-12 12:48:09 +10:00
Andrew Tridgell c47bc09a3c Plane: avoid doing radio trim if less than 20% of travel available 
this prevents problems with awful trim on bootup due to RC TX being
off
 2013-04-12 12:47:59 +10:00
tobias 217b8d7a59 cleanup: use const for struct Location pointers and references 
this allows the compiler to generate more efficient code
 2013-04-09 12:10:32 +10:00
Andrew Tridgell 71f6287388 Plane: fixed spelling 2013-04-06 17:42:20 +11:00
Andrew Tridgell dcbe144c7e Plane: prepare for release of 2.71 2013-04-06 17:27:21 +11:00
Andrew Tridgell e58f49aeaf Plane: copy rudder out in TRAINING mode 
we were doing rudder mixing in training mode, which shouldn't be done
 2013-04-05 19:38:43 +11:00
Andrew Tridgell 993154ea59 Plane: expand the VTAIL_OUTPUT docs for APM1 2013-04-05 16:38:46 +11:00
Andrew Tridgell bd2b9fbe9d Plane: simplify the VTail mixer to be more like a hardware mixer 
this should make it easier to trim the vtail
 2013-04-05 15:47:51 +11:00
Andrew Tridgell 17cbcd1bf6 Plane: fixed failsafe with VTAIL_OUTPUT 2013-04-05 15:35:26 +11:00
Andrew Tridgell 406921faf1 Plane: added VTAIL_OUTPUT option 
this allows for software vtail mixing
 2013-04-05 15:22:11 +11:00
Randy Mackay 21a51c8333 Plane: update GCS_Mavlink parameter documentation 2013-04-03 22:58:25 +09:00
Andrew Tridgell a69c9ff674 Plane: added logging of DIGICAM events 2013-04-02 13:08:38 +11:00
Andrew Tridgell ddfcafe80f Plane: fixed DIGICAM camera trigger 2013-04-02 13:08:38 +11:00
Andrew Tridgell 683a2919d1 Plane: prevent stick mixing when throttle is below failsafe threshold 
this fixes issue #40
 2013-04-02 10:42:56 +11:00
Andrew Tridgell c5e2cfcc3e Plane: preparing for 2.71-beta 2013-04-02 09:25:24 +11:00
Andrew Tridgell 2506c216dd Plane: added a second type of stick mixing 
this changes STICK_MIXING from a boolean to a tri-state. With
STICK_MIXING=1 it now uses FBW style mixing. With STICK_MIXING=2 it
uses the old style of direct stick mixing.
 2013-04-02 08:52:56 +11:00
Andrew Tridgell 5d54215221 Plane: use int16_t() not int() to ensure simulator matches AVR 2013-04-01 22:17:05 +11:00
Andrew Tridgell e390726bdd Plane: prevent overflow on large PID gains 
this uses get_pid_4500() to prevent overflow of servo_out on large PID gains
 2013-04-01 22:17:04 +11:00
Andrew Tridgell 624ebced38 Plane: document INVERTEDFLT_CH 2013-04-01 22:17:04 +11:00
Andrew Tridgell dfb14d760b Plane: added HIL_SERVOS option 
this allows for real servo output in HIL
 2013-03-30 14:38:43 +11:00
Andrew Tridgell 6cc4aadc06 Plane: report compass health in SYS_STATUS 2013-03-29 13:48:40 +11:00
Andrew Tridgell a165f0d138 Plane: removed old angle wrap code 2013-03-29 13:13:50 +11:00
Andrew Tridgell 7db7d7db77 Plane: change FBWB altitude control algorithm 
this makes FBWB much less sensitive to airframe tuning. When the
elevator stick first goes neutral it locks in the current altitude as
the target altitude. When the elevator stick is off neutral, it moves
the target altitude in proportion to the elevator, at a rate goverened
by the new FBWB_CLIMB_RATE parameter

This prevents the aircraft from slowly drifting in altitude in FBWB,
and gives a more intuitive control mechanism for altitude.

Thanks to Chris Miser from Falcon UAV for help in designing this
change
 2013-03-28 10:27:25 +11:00