Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
9,746 Commits 70 Branches 507 Tags 662 MiB
Commit Graph

4122 Commits

Author SHA1 Message Date
texlan 78acea820f Copter: fix symmetry in stability patch for Tricopters 
Removes the "Increase opposing motors by 1/2 the overage of the high
motor" logic and merely moves all 3 motors down by the same amount if
one is over out_max. This eliminates the asymmetric scaling of
the previous logic when more than one motor is over out_max. This
resolves #537
 2013-10-21 20:12:53 +09:00
Randy Mackay 8f4665c4c7 ToshibaLED: ignore I2C errors during init 2013-10-21 20:01:34 +09:00
Randy Mackay 443023bbbf AP_HAL: add ignore_errors to I2C driver 2013-10-21 20:01:32 +09:00
Randy Mackay 943d7374f6 Copter: slow start motors from 0 to min throttle 2013-10-20 14:51:35 +09:00
texlan 53553751d1 Copter: Correctly set limit.lower flags for Tricopters 
Resolves #536
 2013-10-19 23:08:25 +09:00
Andrew Tridgell 1c091cbca5 HAL_PX4: fixed a scheduler bug that affects UART IO 
we need to detect if we are in a timer task using a PID, not a
flag. This is the same type of bug I fixed last week, but now fixed
properly.

The bug could well be the "USB bug" that Craig has been chasing
 2013-10-19 16:50:38 +11:00
Randy Mackay e0c4785b2a Copter: OctaQuad H-frame support 2013-10-18 10:41:07 +09:00
Andrew Tridgell 3393a5c99e AP_Baro: prevent a race condition in the SITL baro driver 2013-10-17 17:22:19 +11:00
Andrew Tridgell 86afc26609 HAL_SITL: decrease wind with altitude 
this prevents JSBSim crash on the runway
 2013-10-17 17:22:19 +11:00
Andrew Tridgell 98d391efa0 AP_Camera: added note on DO_SET_CAM_TRIGG_DIST in docs 2013-10-15 10:09:39 +11:00
Andrew Tridgell ede927f68a HAL_SITL: added airspeed noise control 2013-10-14 15:40:45 +11:00
Mike McCauley c524a7c717 AP_HAL_FLYMAPLE: remove obsolete debugging code from RCInput 2013-10-14 11:34:47 +10:00
Mike McCauley 6f04e5f2e7 AP_HAL_FLYMAPLE: RCInput now more robust in the face of connect/disconnect of 
a PPM-SUM source

Also remove some left over debug code.
 2013-10-14 11:34:47 +10:00
Mike McCauley ce1a8fb831 AP_HAL_FLYMAPLE: Added new example test sketch RCInput.pde 2013-10-14 11:34:47 +10:00
Mike McCauley 3226a81611 AP_HAL_FLYMAPLE: Improvements to RCInput 
More reasonable sync pulse times, add input filter to prevent false triggering
 2013-10-14 11:34:47 +10:00
Mike McCauley fe6cacf081 AP_InertialSensor: Minor correction to comments in AP_InertialSensor_Flymaple.cpp 2013-10-14 11:34:47 +10:00
Mike McCauley 0920d9ac49 AP_HAL_FLYMAPLE: UARTDriver Use new libmaple TX buffers. 
Caution: requires latest libmaple from
git@github.com:mikemccauley/libmaple.git
 2013-10-14 11:34:47 +10:00
Mike McCauley 38512e3756 AP_HAL_FLYMAPLE: I2CDriver improvements to interrupt hygiene 2013-10-14 11:34:47 +10:00
Mike McCauley 8e5a9b06fb AP_HAL_FLYMAPLE: Fix example Scheduler.pde fo recent changes to API 2013-10-14 11:34:47 +10:00
Mike McCauley bc55a2844c AP_HAL_FLYMAPLE: Fix example Scheduler.pde to compile with recent changes to 
scheduler API
 2013-10-14 11:34:47 +10:00
Andrew Tridgell 72b97168c9 AP_RangeFinder: improved SONAR_PIN docs 2013-10-14 10:03:52 +11:00
Andrew Tridgell 7831113f84 AP_InertialSensor: yield the CPU for the right time in wait_for_sample() 
this improves timing performance
 2013-10-14 08:45:58 +11:00
Andrew Tridgell d973730b88 HAL_PX4: use hrt timer and semaphores to improve timing 
this gives much more accurate microsecond delays, while also ensuring
we yield the CPU when possible
 2013-10-14 08:29:30 +11:00
Andrew Tridgell 8532e2bff8 AP_InertialSensor: fixed timing of PX4 sensor samples 2013-10-13 22:15:50 +11:00
Andrew Tridgell c4d62f6b92 AP_Scheduler: fixed SCHED_DEBUG docs 2013-10-13 21:41:01 +11:00
Andrew Tridgell 0f4da25e68 AP_Scheduler: make sure we run remaining tasks on overrun 
when a task overruns its time, we can still run the rest of the tasks
in the task list
 2013-10-13 21:41:01 +11:00
Andrew Tridgell a5788dde8f HAL_AVR: added Scheduler.set_timer_speed() support 2013-10-13 11:03:37 +09:00
Andrew Tridgell 7ef187fcfd AP_HAL: added optional set_timer_speed() scheduler API 
will be used by copter to reduce interrupt load on APM2
 2013-10-13 11:03:35 +09:00
Andrew Tridgell 4de2a654ab AP_Mount: changed ahrs to be a const reference 
saves a bit of code
 2013-10-13 11:03:24 +09:00
Andrew Tridgell 34770fe6bf HAL_AVR: fixed SPI bus speed switching 
this fixes a bug in changing the bus speed between devices
 2013-10-13 11:03:17 +09:00
Randy Mackay f2f61af125 HAL_AVR: scheduler interrupt 500hz for APM2 2013-10-13 11:03:13 +09:00
Andrew Tridgell 9833900f91 AP_InertialSensor: run MPU6000 sensor register reads at 8MHz 
run other register IO at 500kHz
 2013-10-13 11:03:08 +09:00
Andrew Tridgell 04836ea763 HAL_AVR: set initial bus speed on MPU6k to 500kHz, then change to 8MHz 
this should allow us to work even with older chips. See the MPU6000
product specification, which says max 20MHz for sensor and interrupt
regs, and max 1MHz for all other regs
 2013-10-13 11:03:06 +09:00
Andrew Tridgell 5ccf8409b4 AP_HAL: added an optional spi.set_bus_speed() API 
this will be used by MPU6000 on APM2 to change speed after init
 2013-10-13 11:03:04 +09:00
Andrew Tridgell 4dc2f4bd58 HAL_AVR: spi3 at 8mhz for mpu6k and ms5611 2013-10-13 11:03:02 +09:00
John Arne Birkeland f6038f36bf HAL_AVR: Improved AVRTimer micros() and millis() 
- More efficient code by using 16-bit timer
- micros() now has proper 1 us resolution and less overhead
- millis() has less overhead
- removed unneeded/unwanted initializatin of timers in AVRTimer::init()
 2013-10-13 11:03:00 +09:00
Andrew Tridgell 5ba34b38c1 HAL_AVR: added specialised transfer functions for MPU6k and APM1 ADC 
this saves quite a lot of time in interrupts
 2013-10-13 11:02:57 +09:00
Andrew Tridgell d60a68fd9c AP_Baro: check baro at exactly 100Hz 
prevent waits for samples
 2013-10-13 11:02:53 +09:00
Randy Mackay 499bc52c5b Perfmon: fixes to work with HAL 2013-10-13 11:02:49 +09:00
Andrew Tridgell e34cc6dd9a HAL_PX4: added some UART debugging 
this may help to track down USB issues
 2013-10-13 12:43:25 +11:00
Andrew Tridgell 55ba536331 HAL_SITL: fixed a warning 2013-10-12 13:13:00 +11:00
Andrew Tridgell 84336bc74e AP_TECS: added initial flight_stage handling 2013-10-12 13:12:43 +11:00
Andrew Tridgell 2b80df6319 AP_SpdHgtControl: added FightStage parameter to update_pitch_throttle() 
will be used for special landing handling
 2013-10-12 13:12:16 +11:00
Andrew Tridgell 0f0b040891 AP_Camera: added set_trigger_distance() call 2013-10-11 21:37:27 +11:00
Andrew Tridgell 1c7a44a595 GCS_MAVLink: regenerate mavlink headers 2013-10-11 21:37:27 +11:00
Andrew Tridgell 8198bfe756 MAVLink: added MAV_CMD_DO_SET_CAM_TRIGG_DIST 2013-10-11 21:36:50 +11:00
Andrew Tridgell 63bee0b2d8 HAL_PX4: disable checks for in_timerprocess 
these are not valid in this form for the way the timer thread works on
PX4.
 2013-10-11 16:06:35 +11:00
Andrew Tridgell 25d3e5b7e9 AP_GPS: changed fake GPS fix to have a latitude/longitude 
Pair-Programmed-With: Randy Mackay <rmackay9@yahoo.com>
 2013-10-11 16:06:35 +11:00
Andrew Tridgell ae1fd4baa4 HAL_AVR: reduce the latency of semaphore waits 
this reduces the average cost of waiting for the MPU6000 semaphore
from the main loop
 2013-10-10 15:41:51 +11:00
Andrew Tridgell cfa1b5353f AP_Scheduler: show slips only for SCHED_DEBUG>1 
this allows us to see PERF reports in copter without console writes
slowing things down
 2013-10-10 15:41:34 +11:00
Andrew Tridgell dd4b9275fd AP_Scheduler: improved the accuracy of the scheduling code 
prevent accumulated micros() errors in run()
 2013-10-10 14:14:39 +11:00
Randy Mackay 1a070e61f0 BattMon: amp-per-volt reduced to 17 (was 18.002) 2013-10-10 11:14:01 +09:00
Andrew Tridgell eb0176d509 GCS_Console: don't build this example 
it doesn't build any more
 2013-10-10 09:54:20 +11:00
Andrew Tridgell b3af59cc0c AP_InertialSensor: don't build L3G4200D example 2013-10-10 09:54:20 +11:00
Andrew Tridgell fc7f3c8aa6 AP_HAL: fixed example build 2013-10-10 09:54:20 +11:00
Andrew Tridgell a04c056598 AP_InertialSensor: remove unused get_last_sample_time_micros() 2013-10-10 09:54:19 +11:00
Craig3DRobotics e5501bf911 AP_BattMonitor: Updated parameter descriptions 2013-10-09 15:33:03 -07:00
Andrew Tridgell cd65e2109d AP_BattMonitor: fixed type in docs 2013-10-10 07:22:05 +11:00
Andrew Tridgell 0d682e74c1 HAL_Linux: run threads a bit more slowly 
this was just wasting cycles
 2013-10-10 07:21:38 +11:00
Andrew Tridgell 8f79a03c25 HAL_Linux: use larger UART buffers 
might as well use the memory
 2013-10-10 07:21:38 +11:00
Randy Mackay 13cf7c96cd GPSGlitch: parameters for accel and always-ok-radius 2013-10-09 13:02:14 +09:00
Andrew Tridgell 5d685385eb AP_InertialSensor: use gyro sample count on L3G4200D 
this gives more even timing in ArduCopter
 2013-10-08 19:20:34 +11:00
Andrew Tridgell 6444b0bddd AP_InertialSensor_L3G4200D: a sample is only available if gyro had a sample 2013-10-08 19:20:34 +11:00
Andrew Tridgell e5e4cdee18 AP_InertialSensor: added wait_for_sample() API call 
this waits for a new INS sample to arrive, using whatever method is
most efficient on each INS type
 2013-10-08 17:31:15 +11:00
Andrew Tridgell 67db1cedaa HAL_PX4: fixed delay_microseconds() on PX4 
we could underflow and delay a very long time!
 2013-10-08 17:31:15 +11:00
Andrew Tridgell f59d0099a4 AP_Notify: fixed RGBLED on PX4 with latest PX4Firmware 
now needs a RGBLED_MODE_ON
 2013-10-08 14:55:10 +11:00
Randy Mackay 9aea577eb1 BattMonitor: correct default pins for PX4 2013-10-08 10:28:48 +09:00
Andrew Tridgell c17a5e5ed1 AP_InertialSensor: added a small delay in accel calibration 
allows threads to run on Linux
 2013-10-08 11:50:54 +11:00
Andrew Tridgell 1ccd6bb7ef AP_Compass: don't wait more than 1ms for compass sample 
this prevents 5ms delays in compass accumulate
 2013-10-08 11:50:54 +11:00
Andrew Tridgell 28b4ae1c3a HAL_Linux: improved latency of timed semaphores 2013-10-08 11:50:54 +11:00
Andrew Tridgell 6fa55d101f AP_Baro: fixed I2C semaphore handling for BMP085 driver 2013-10-08 11:50:54 +11:00
Andrew Tridgell f286369990 AP_Compass: fixed orientation on Linux 2013-10-08 11:50:54 +11:00
Andrew Tridgell 83c942a512 AP_Compass: prevent NULL deref on enable mag while running 2013-10-08 11:50:53 +11:00
Andrew Tridgell 77e8061170 AP_Common: added product ID for L3G4200D 2013-10-08 11:50:53 +11:00
Andrew Tridgell a216e1d239 HAL_Linux: don't prevent write while timer is busy 
the timer can block on I2C writes, which causes the main loop to run
 2013-10-08 11:50:53 +11:00
Andrew Tridgell 91511e6503 HAL_Linux: better realtime setup 
lock all memory and pre-fault the stack in all threads
 2013-10-08 11:50:53 +11:00
Andrew Tridgell 2422b94292 DataFlash: prevent valgrind errors from Empty driver 2013-10-08 11:50:53 +11:00
Andrew Tridgell 12af23bb7c AP_InertialSensor: added L3G4200D example 2013-10-08 11:50:53 +11:00
Andrew Tridgell 1aabd7155e AP_InertialSensor: added L3G4200D driver 
this is for a cheap ebay 10DOF sensor
 2013-10-08 11:50:53 +11:00
Andrew Tridgell 64c8cb4739 APM_Control: improved auto docs for AP_SteerController 2013-10-07 09:31:02 +11:00
Mike McCauley 84edbb335a AP_HAL_FLYMAPLE: UARTDriver now uses the new libmaple tx ring buffers 
This requires the libmaple fork at
https://github.com/mikemccauley/libmaple.git
which includes low level support for buffered usart transmits
 2013-10-07 08:41:53 +11:00
Mike McCauley 11317dcec4 AP_HAL_FLYMAPLE: FlymaplePortingNotes.txt improvements to install/build 
documentation.
 2013-10-07 08:41:53 +11:00
Mike McCauley 7f9d4a155f AP_HAL_FLYMAPLE: UARTDriver begin now honours txS == 0 which means no change 2013-10-07 08:41:52 +11:00
Mike McCauley 60921f7dfa AP_HAL_FLYMAPLE: Improved libmaple version detection 2013-10-07 08:41:52 +11:00
Andrew Tridgell 07b8f45770 HAL_Linux: use CLOCK_MONOTONIC_RAW to ensure clock never goes backwards 
this avoids ntp mucking with APM timing
 2013-10-07 08:41:52 +11:00
Andrew Tridgell 1518217952 HAL_FLYMAPLE: removed unused backend console code 2013-10-05 22:03:58 +10:00
Andrew Tridgell de4d505f62 HAL_AVR: fixed examples build 2013-10-05 22:03:42 +10:00
Andrew Tridgell 487caea3a5 AP_Baro: added update_calibration() method 
used for auto baro calibration when disarmed
 2013-10-05 18:44:00 +10:00
Andrew Tridgell 7cab8cb3bb HAL_PX4: removed Console driver 2013-10-05 18:33:07 +10:00
Andrew Tridgell b30f652cec HAL_Linux: removed Console driver 2013-10-05 18:32:57 +10:00
Andrew Tridgell 21f0086647 HAL_FLYMAPLE: removed Console driver 2013-10-05 18:32:46 +10:00
Andrew Tridgell 8e7d9bb464 HAL_Empty: removed Console driver 2013-10-05 18:32:35 +10:00
Andrew Tridgell 930d664677 AVR_SITL: removed Console driver 2013-10-05 18:32:23 +10:00
Andrew Tridgell 7072c52b57 HAL_AVR: removed Console driver 2013-10-05 18:32:12 +10:00
Andrew Tridgell 9f24c45502 AP_HAL: removed separate Console class 
the idea of a separate console class was never really used, and just
added confusion in a HAL port. It also consumes some much needed ram
and flash space on APM2
 2013-10-05 18:32:00 +10:00
Andrew Tridgell 39bfd809c2 APM_Control: disable integrator below minimum speed 
this reduces the impact on initial takeoff
 2013-10-05 18:11:35 +10:00
Andrew Tridgell ad30f8effa HAL_PX4: try to reopen UARTs if safety switch is disarmed 
this allows attaching to the USB port after power on

Pair-Programmed-With: Randy Mackay <rmackay9@yahoo.com>
 2013-10-05 15:47:28 +10:00
Andrew Tridgell 34a328f66d AP_HAL: added safety_switch_state() function in hal.util 
will be used by copter to check safety switch is set
 2013-10-05 15:46:35 +10:00
Andrew Tridgell 58187ea449 APM_Control: change minspeed on steering controller to 1.0 2013-10-05 12:56:28 +10:00
Andrew Tridgell 5abf060c41 APM_Control: enable integrator in ACRO rate controller 
this work better for unlocked mode
 2013-10-05 07:42:48 +10:00
Andrew Tridgell d27f5e89d7 APM_Control: remove public AP_PitchController::get_coordination_rate_of|cat() 2013-10-05 07:42:48 +10:00
Andrew Tridgell bd848a6a7f APM_Control: added rate and angle steering controllers 2013-10-05 07:42:48 +10:00
Mike McCauley 72aa8a18ab AP_HAL_FLYMAPLE: update documentation in FlymaplePortingNotes.txt 
Added info about where to get my patched version of libmaple.
 2013-10-04 07:21:56 +10:00
Mike McCauley 6b003ae551 AP_HAL_FLYMAPLE: Fixed problem with tx buffer that caused slow parameter 
delivery
 2013-10-04 07:21:56 +10:00
Mike McCauley c90c1b9998 AP_InertialSensor: Improvements to Flymaple sensors 
Fix a bug that caused hang after 71 minutes. Use I2CDriver semaphore.
Remove test for in_accumulate: not needed.
 2013-10-04 07:21:55 +10:00
Mike McCauley 39f9b7bbc9 AP_HAL_FLYMAPLE: Add test for correct version of libmaple 
Patched version of libmapl is required for Flymaple I2Driver to work.
 2013-10-04 07:21:55 +10:00
Mike McCauley 1f7272978c AP_HAL_FLYMAPLE: fix compile error in example AP_Baro_BMP085_test.pde 
due to need for new library AP_Notify
 2013-10-04 07:21:55 +10:00
Mike McCauley 2d3c86ee80 AP_HAL_FLYMAPLE: I2CDriver now uses low level hardware i2c librray from 
libmaple

CAUTION: requires a patched version of libmaple, to be provided by mikem.
 2013-10-04 07:21:55 +10:00
Mike McCauley 68a7cac9a2 AP_HAL_FLYMAPLE: Improvements to FLYMAPLEStorage 
Fix a number of bugs and expand storage to an emulated 4kb, as needed by AP.
 2013-10-04 07:21:55 +10:00
Mike McCauley 29707f4401 AP_HAL_FLYMAPLE: Modest speed improvements to I2CDriver 
Can now achieve about 285kHz using bitbanging.
Proper low-level hardware I2C support has been written and stashed,
but has to wait until a bug in libmaple is addressed.
Ref: http://forums.leaflabs.com/topic.php?id=13458
 2013-10-04 07:21:55 +10:00
Mike McCauley 9ea1108d4e AP_InertialSensor: Flymaple filter constructor arguments non non-zero 2013-10-04 07:21:55 +10:00
Randy Mackay ecd4ed2277 GCS_MAVLink: generate mavlink includes 2013-10-03 22:12:58 +09:00
Randy Mackay 8aec70af1d GCS_MAVLink: add SYS_STATUS_SENSOR enum 2013-10-03 22:12:48 +09:00
Randy Mackay 688dd5374e ToshibaLED: flashing green if disarmed with GPS lock 
solid blue if armed without GPS lock
 2013-10-03 14:33:39 +09:00
Andrew Tridgell 7a9ed0a5a1 AP_GPS: fixed warning 2013-10-03 12:21:08 +10:00
Andrew Tridgell 86b58314c4 AP_Common: pack the RallyLocation structure 
so it can be written as a single binary block
 2013-10-03 12:21:08 +10:00
Michael Day 823a40c203 AP_Common: Added RallyLocation struct. 2013-10-03 12:21:08 +10:00
Michael Day 1777db91cb GCS_MAVLink: import latest upstream. 
This add rally points.
 2013-10-03 12:21:08 +10:00
Andrew Tridgell 99a8ba4634 DataFlash: fixed display of last page of flash logs 2013-10-03 12:21:08 +10:00
Andrew Tridgell 89f121ea77 DataFlash: wait for blocks to finish writing to flash on log read 2013-10-03 12:21:08 +10:00
Andrew Tridgell 8e0a136d78 HAL_AVR: mark some examples as not building 2013-10-03 12:21:08 +10:00
Andrew Tridgell a250c13c79 HAL_PX4: fixed build 2013-10-03 12:21:08 +10:00
Andrew Tridgell 1440c8cebd HAL_Linux: implement a dummy console buffered write() 2013-10-03 12:21:08 +10:00
Andrew Tridgell 9624821493 HAL_FLYMAPLE: implement a dummy buffered write 2013-10-03 12:21:08 +10:00
Andrew Tridgell a8c97f99d1 HAL_Empty: implement a dummy buffered write 2013-10-03 12:21:08 +10:00
Andrew Tridgell c035eef845 HAL_SITL: implement a dummy buffered write 2013-10-03 12:21:07 +10:00
Andrew Tridgell a59f505d25 HAL_AVR: implement an efficient buffer write() call for AVR 
this saves some cycles in the telemetry code
 2013-10-03 12:21:07 +10:00
Andrew Tridgell efe1e01700 AP_HAL: require a buffer write() function in all ports 
this makes a sufficient performance difference that it is worth it
 2013-10-03 12:21:07 +10:00
Andrew Tridgell 5489097476 AP_GPS: update the UBLOX rates async from the start 
this saves a bit of startup time
 2013-10-03 12:21:07 +10:00
Andrew Tridgell cee8a017ab AP_GPS: added UBLOX_FAKE_3DLOCK debugging option 
useful when unable to get 3D lock
 2013-10-03 12:21:07 +10:00
Andrew Tridgell f1e120113c AP_Common: added OPTIMIZE() macro 
this can be used to change the compiler optimization level of
individual functions

Pair-Programmed-With: Randy Mackay <rmackay9@yahoo.com>
 2013-10-03 12:21:07 +10:00
Andrew Tridgell fb19dbb404 AP_Math: cope with large values passed into the wrap functions 
this uses modulus if the function would loop too many times

Pair-Programmed-With: Randy Mackay <rmackay9@yahoo.com>
 2013-10-03 12:21:07 +10:00
Andrew Tridgell 34f7f88190 AP_GPS: check for corret GPS solution rates in flight and fix 
if the GPS is giving us data at less than 300ms intervals then re-send
the configuration messages to try to kick it into the right rates

Pair-Programmed-With: Randy Mackay <rmackay9@yahoo.com>
 2013-10-03 12:21:07 +10:00
Randy Mackay db2975901d AP_HAL_AVR_SITL: use SIM_BATT_VOLTAGE parameter 2013-10-03 11:16:36 +09:00
Randy Mackay 8d1d8c78b5 SITL: add SIM_BATT_VOLTAGE 2013-10-03 11:16:35 +09:00
Randy Mackay f1309ed63f BattMonitor: bug fix for current_total_mah 2013-10-03 11:16:24 +09:00
Randy Mackay 7d73e62a23 BattMonitor: add exhausted method 
Current total calculations changed to use micros instead of millis for
improved accuracy
Removed unused pack_capacity accessor
Initialise private members
 2013-10-03 11:16:19 +09:00
Randy Mackay d9fe099885 BattMonitor: update comments and defaults 2013-10-03 11:16:17 +09:00
Andrew Tridgell 366d73124a AP_Battery: fixed parameter name and default voltage ratio 
also setup SITL with right pins
 2013-10-03 11:16:15 +09:00
Andrew Tridgell c7df0eaf2a SITL: added battery voltage and current 
assume 3DR brick
 2013-10-03 11:16:14 +09:00
Andrew Tridgell 88777beab0 AP_BattMonitor: minor cleanups 
cleanup name to be multiplier not div ratio, and make 2 variables
non-static
 2013-10-03 11:16:10 +09:00
Randy Mackay 8b06a12fa4 BattMonitor: initial draft lib 2013-10-03 11:16:01 +09:00
Andrew Tridgell 42bc8b12df SITL: added a SIM_GPS_HZ option 
this allows simulation of slow GPS updates (for example, the 1Hz GPS
problem)
 2013-10-01 16:39:16 +10:00
Andrew Tridgell c9fea2c706 HAL_Linux: fixed scheduling priorities 
need to be between 1 and 99
 2013-10-01 13:05:04 +10:00
Andrew Tridgell 134bf5a5c9 AP_Menu: be friendly to multi-tasking OSes in menus 2013-10-01 13:04:40 +10:00
Andrew Tridgell 2819dd99fa AP_Menu: copy with newline from console 
helps debugging on HAL_Linux
 2013-10-01 13:00:48 +10:00
Andrew Tridgell bbac3265b2 HAL_Linux: default to hal.console on stdout 2013-10-01 12:49:58 +10:00
Andrew Tridgell bcc9cdbf43 HAL_Linux: make I2CDriver more portable 
this allows it to build on the Beaglebone
 2013-10-01 12:37:13 +10:00
Andrew Tridgell 51c19331a6 HAL_Linux: fixed build 2013-10-01 12:11:48 +10:00
Andrew Tridgell e60d5d4f33 AP_Airspeed: fixed some warnings 2013-09-30 21:06:43 +10:00