Commit Graph

27052 Commits

Author SHA1 Message Date
Randy Mackay 0644314499 DataFlash: add visual odometry sensor logging 2017-04-19 11:04:40 +09:00
priseborough d2c89443df DataFlash: add logging for EKF body frame odometry fusion 2017-04-19 11:04:40 +09:00
priseborough 90cd46f4d7 AP_AHRS: simulate body frame odometry sensor 2017-04-19 11:04:40 +09:00
priseborough 3b82f60b08 AP_AHRS: add interface for use of visual odometry data 2017-04-19 11:04:40 +09:00
priseborough fb7104f4e3 AP_NavEKF3: add fusion method for body frame odometry data 2017-04-19 11:04:40 +09:00
Randy Mackay 595d37ec70 AP_VisualOdom: class accepts deltas from visual odom camera 2017-04-19 11:04:40 +09:00
Michael du Breuil 9c6fc1f122 AP_Landing: Correct deepstall param doc strings 2017-04-18 18:51:32 -07:00
Michael du Breuil 6f297deaf7 AP_GPS: Unify inject_data interface for all classes 2017-04-19 02:05:51 +01:00
Andrew Tridgell 88e02c7b35 Plane: log the throttle mix for quadplane copter control 2017-04-19 09:08:43 +10:00
Andrew Tridgell fe3e7e8153 AC_AttitudeControl: added get_throttle_mix()
and when we use set_throttle_mix_value(), set both desired and actual

thanks to Leonard for the suggestions
2017-04-19 09:08:43 +10:00
Andrew Tridgell 8e3f8f47c8 Plane: tilt motors fast in final stages of quadplane transition
when transition of tilt quadplane has reached the stage where the tilted
motors are used solely for fwd thrust and rear motors are off we should
move the tilt to full forward rapidly
2017-04-19 09:08:14 +10:00
Tom Pittenger 5b47927937 Plane: pre-launch flaps incorrectly always disabled
Pre-launch flaps are always disabled by checking current state against zero (which it always will be) instead of the param which is what it was supposed to be checking.
2017-04-18 14:40:17 -07:00
Niels Joubert 873915d82b AP_HAL_SITL: Support both SBPv0 and SBPv2 2017-04-18 18:25:54 +01:00
Niels Joubert abd408bf40 SITL: Support both SBPv0 and SBPv2 2017-04-18 18:25:54 +01:00
Niels Joubert 4bf9fc071c AP_GPS: Adds SBP Version 2: Swift Navigation Piksi Multi support
This commit adds:

- New driver for SBPv2
--- Support Piksi Multi, Swift Navigation's multi-band multi-constellation GPS
--- Proper parsing of SBP flags
--- Instant response to Piksi status changes (no more timeouts)
--- Support for Piksi Multi as a Single-Point-Positioning GPS or only onboard GPS
--- Incorporates horizontal and vertical accuracy estimates, and vdop.
- Updates driver for SBPv0
--- Continue support for previous Piksi

- Dispatches correct driver based on SBP version.
2017-04-18 18:25:54 +01:00
Andrew Tridgell d5ec7b0aad Plane: fixed a sign error in the angle assist code
thanks to Leonard for finding this!
2017-04-18 22:09:22 +10:00
Randy Mackay 41d999994a Tools: update intel aero rtf default parameters 2017-04-18 20:32:36 +09:00
Andrew Tridgell 3415dfb46c HAL_PX4: implement split transfers for I2C 2017-04-18 18:15:04 +10:00
Matt 29adf300ee Tools: update default Solo parameters running AC3.5 2017-04-18 11:00:26 +09:00
Jacob Walser 5ee98879f3 Sub: Update ReleaseNotes.txt for 3.5-rc1 2017-04-17 21:30:19 -04:00
Andrew Tridgell ebde6e1ce3 Copter: output any servo channels on motor output
if we have any auxillary servo channels we need to calculate the
output value
2017-04-18 09:34:42 +09:00
Randy Mackay 032bfad79f Copter: move rc input check to esc_calibration_startup_check
No functional change
2017-04-18 09:29:55 +09:00
Randy Mackay fc675a1e4a Copter: do not allow motor test before initialisation completes 2017-04-18 09:29:53 +09:00
Randy Mackay 1bfbf0d43f Copter: enable motors at end of initialisation 2017-04-18 09:29:51 +09:00
Andrew Tridgell 6a1c58b5a5 AP_Notify: fixed RGB led output to use SRV_Channels 2017-04-18 08:41:24 +10:00
Andrew Tridgell ce87bb7e39 SRV_Channel: added set_output_pwm_chan() 2017-04-18 08:41:24 +10:00
Pierre Kancir b541949262 WAF: Px4.py remove unused PX4_UAVCAN_ROOT and UAVCAN_LIBUAVCAN_PATH 2017-04-17 13:32:27 -07:00
Jacob Walser 004a7aceb7 Sub: Ignore mission commands with unsupported altitude values 2017-04-17 11:25:41 -04:00
Jacob Walser 287f2e3c56 Sub: Rework log opening/closing logic
We were trying to open logs at >400Hz when logging wasn't available
2017-04-17 10:55:18 -04:00
Eugene Shamaev 20f7d75b5a AP_UAVCAN: multiple messages when more than 15 servos are sent 2017-04-17 12:32:56 +01:00
Michael du Breuil 994790be0b Dataflash: Clamp GPS accuracy values 2017-04-17 11:37:22 +01:00
Eugene Shamaev fd866d3e20 AP_Baro: removal of legacy UAVCAN support 2017-04-17 17:27:18 +10:00
Eugene Shamaev 67a6e651d6 AP_BoardConfig: removal of legacy UAVCAN support 2017-04-17 17:27:18 +10:00
Eugene Shamaev 0c4a68314b AP_HAL_PX4: removal of legacy UAVCAN support 2017-04-17 17:27:18 +10:00
Eugene Shamaev b3d9126407 AP_Compass: removal of legacy UAVCAN support 2017-04-17 17:27:18 +10:00
Eugene Shamaev 8130d85b42 AP_GPS: removal of legacy UAVCAN support 2017-04-17 17:27:18 +10:00
Andrew Tridgell e8117f5f46 PX4: removed attempt at formatting microSD
this never worked, and its a bad idea anyway
2017-04-17 14:56:17 +10:00
Andrew Tridgell 92f060bdef SITL: improved single-motor tailsitter plane
give larger control surfaces and take account of thrust airflow over
control surfaces
2017-04-17 14:23:15 +10:00
Andrew Tridgell 6b6ad6ddf2 AP_AHRS: fixed wrap of yaw in AHRS_View 2017-04-17 12:15:19 +10:00
Jacob Walser 7737c3445c Sub: Default CAM_SLEW_LIMIT to 30 deg per second 2017-04-16 21:24:55 -04:00
Jacob Walser e24fef70f6 Sub: Workaround for more graceful servo mount initialization 2017-04-16 20:14:23 -04:00
Jacob Walser e92dbad358 Sub: Fixup rcin initialization 2017-04-16 18:22:08 -04:00
Jacob Walser 05b19cbb7d Sub: Correct default flight mode button functions to match suggested
setup
2017-04-16 15:48:35 -04:00
Jacob Walser 4c7f744863 Sub: Setup throttle channel default trim parameter value 2017-04-16 14:56:18 -04:00
Jacob Walser d2629a13ee Sub: Remove handling of unsupported mavlink messages 2017-04-16 14:43:56 -04:00
Jacob Walser 697b095e99 Sub: Remove unused command_ack_counter 2017-04-16 14:25:13 -04:00
Jacob Walser d0171395b8 Sub: Remove baro_alt and baro_climbrate members
We can get this from baro object directly
2017-04-16 14:25:13 -04:00
Jacob Walser 3a501a42fb Sub: Set default param value instead of forcing at boot 2017-04-16 14:25:13 -04:00
Jacob Walser 8d93af112f Sub: Remove motors.set_air_density_ratio
Unused in AP_Motors6DOF
2017-04-16 14:25:13 -04:00
Jacob Walser 8c6fa6f651 Sub: Remove unused ap.usb_connected flag 2017-04-16 14:25:13 -04:00