Commit Graph

30 Commits

Author SHA1 Message Date
Randy Mackay fbfc94cf69 Copter: remove GPS glitch and failsafe
The EKF failsafe now captures all failures that could lead to a bad
position including GPS glitches and a bad compass meaning we do not need
this protection in the main flight code.
2015-03-13 16:40:46 +09:00
Randy Mackay e081b9d1c7 Copter: home is set becomes three state 2015-02-12 15:00:50 +09:00
Randy Mackay b9977a1115 Copter: add land_complete_maybe flag 2014-09-19 16:43:15 +09:00
Randy Mackay bca309eb1e Copter: replace takeoff_complete with landed_complete 2014-02-15 05:27:43 +11:00
Randy Mackay f0f6e85b39 Copter: ARMING_CHECK made into bitmask
Allows arming checks to be individually enabled or disabled for baro,
compass, GPS, INS, parameters, RC and board voltage
2013-11-15 17:13:56 +09:00
Randy Mackay 32f53624d6 Copter: rename low_battery to failsafe.battery 2013-10-13 13:52:52 +09:00
Randy Mackay 9435eb4a15 Copter: remove unused flags and consolidate ap and ap_system 2013-10-08 15:25:14 +09:00
Randy Mackay 0c0de7c53e Copter: simple mode speedup
super simple and simple mode headings separated
g.super_simple converted into a bitmap by flight mode switch position
2013-10-05 18:26:56 +09:00
Randy Mackay dab4f032f9 Copter: integrate BattMonitor 2013-10-03 11:16:28 +09:00
Randy Mackay 7cc8a9038f Copter: move failsafe flags into structure 2013-09-26 19:37:15 +09:00
Randy Mackay 4c8227c050 Copter: update AP_Notify for gps failsafe and glitching 2013-09-24 21:41:28 +09:00
Randy Mackay 152f5da880 Copter: integrate AP_Notify batt and radio failsafes 2013-09-11 14:36:38 +09:00
Randy Mackay 52ef77393c Copter: integrate Toshiba_LED_PX4 2013-08-30 13:01:35 +10:00
Randy Mackay 0f8f5bc048 Copter: remove unused ap.gps_status flag 2013-07-29 16:46:05 +09:00
Olivier-ADLER 87d062905e Copter: 3 positions switch support for CH7 and CH8 - new 3 positions SIMPLE / SUPERSIMPLE mode
3 positions modes must use mode number >= 100
pre-arm check correction for CH7 - CH8 check
2013-07-29 15:12:10 +09:00
Randy Mackay c3daf78340 Copter: reset loiter target when landed 2013-07-28 18:18:41 +09:00
Randy Mackay 6a173eb7ad Copter: remove unused dump_state function
Feel free to add this back in when doing debug.  Let's not have too much
debug permanently in the code because it makes it harder to read.
2013-05-17 12:11:23 +09:00
Randy Mackay bb7aec2600 Copter: log compass failur to dataflash 2013-05-13 18:01:30 +09:00
Randy Mackay cca05ee8ae Copter: start dataflash logging when arming
Stop nearly empty logs from being produced.
Removed redundant armed bit from ap state.
2013-05-03 14:49:55 +09:00
Randy Mackay bab9fa25e5 Copter: add GCS failsafe 2013-04-29 21:30:22 +09:00
Randy Mackay 1ee825ee9a Copter: move alt and wp checking to AC_WPNAV
RTL fix so that if it starts rtl-ing from above 80m it returns home
while descending instead of descending at initial position.
add get and set_target_alt_for_reporting
2013-04-14 10:39:23 +09:00
Randy Mackay 150046f2b8 Copter: GPS Failsafe implemented
Switches to LAND mode 5 seconds after losing GPS if you're in a flight
mode that requires a GPS
2013-03-16 17:27:46 +09:00
Randy Mackay f9539384a1 Copter: rename failsafe to failsafe_radio
Makes way for separation of failsafes for throttle, gps and gcs
2013-03-16 17:14:21 +09:00
Randy Mackay b4bbae56c6 ArduCopter: reduce redundant event logging
We now only write state changes to the dataflash log when they have
changed.
Also replaced <tab> with <space> in AP_State.pde
2013-01-13 00:13:10 +09:00
rmackay9 672fdfbf71 ArduCopter: added ERR dataflash message
Failsafe events changed to errors so they are more obvious.
Errors recorded to dataflash for failure to init compass and optical flow sensor.
Errors recorded for pwm failure.
Resolved a compile error when dataflash logging is disabled.
2013-01-02 09:55:37 +11:00
rmackay9 7a5e4b8549 ArduCopter: stop unnecessary updates of target altitude and knock-on effect of too many EV message in dataflash log 2013-01-02 09:19:17 +11:00
rmackay9 a5bb54e36e ArduCopter: RTL clean-up and slightly improved landing sensor
Consolidated RTL state to be captured by rtl_state variable.
Combined update_RTL_Nav and verify_RTL functions which performed the same function but one was for missions, the other for the RTL flight mode.
Renamed some RTL parameters and global variables to have RTL at the front.
Landing detector now checks accel-throttle's I term and/or a very low throttle value
2012-12-06 10:31:52 +09:00
Andrew Tridgell bcae83c4f6 ACM: make it possible to run CLI on radio port in ArduCopter 2012-11-21 21:41:34 +11:00
rmackay9 258442770d ArduCopter: flight mode changes ignored while in throttle failsafe
reaction time to flight mode changes (when not in failsafe) reduced from 0.6 seconds to 0.1 seconds
2012-11-13 12:50:51 +09:00
Jason Short bfca0ff9bc ACM: added ap_state.pde 2012-11-09 22:15:15 -08:00