Randy Mackay
79d2fe6271
Copter: double flash arming light when pre-arm checks fail
...
Hardly my finest work but it's temporary because we're going to replace
all the led, buzzer etc with a library called AP_Notify in the near
future.
2013-07-04 16:26:22 -10:00
Randy Mackay
21f3534a93
Copter: remove DigitalWriteFast
...
With APHal all writes are fast
2013-05-20 11:27:35 +09:00
Randy Mackay
7cf2255822
Copter LEDs: replace bitRead with bitmask
...
Consolidate all checks of led_mode to leds.pde
Add #defines for bitmasks comparisons
Some formatting changes
2013-04-01 13:10:12 +09:00
Randy Mackay
f7d977fe37
Copter: add support for GPS fix type 2D
2013-03-27 11:41:47 +09:00
Pat Hickey
2aa4657315
ArduCopter: changes to use CONFIG_HIL_BOARD
2012-12-20 14:52:28 +11:00
Pat Hickey
d9e0bbbbab
ArduCopter: first pass at AP_HAL porting
...
* changed all the byte types to uint8_t
* fixed up much of the serial stuff
2012-12-20 14:52:27 +11:00
rmackay9
07a7a1acd8
ArduCopter: replaced digitalRead and digitalWrite with faster calls
...
improved performance logging to dataflash
2012-11-19 01:16:07 +09:00
rmackay9
bcb9519fd7
ArduCopter: renamed system bitmap to ap_system to resolve desktop compile issues
2012-11-11 22:42:10 +09:00
Jason Short
d2a5928c06
Ap state updates
2012-11-09 22:15:15 -08:00
rmackay9
a1b4ec6d0e
ArduCopter: move to use new INS library instead of IMU library
2012-11-07 19:21:09 +09:00
uncrustify
b6dd8aa592
uncrustify ArduCopter/leds.pde
2012-08-21 18:55:44 -07:00
Robert Lefebvre
4e4ff84cf1
Updates to CopterLEDS
...
Creation of Nav Blink Function.
2012-05-22 09:58:37 -04:00
Robert Lefebvre
c8fb9a6635
More CopterLEDS changes.
...
Merged CopterLEDS and Piezo functions to eliminate pin conflict on APM2. Created new Parameter bit to turn piezo function on and off from MP. Moved GPS and Aux pin assignments to allow commonality between APM1 and 2. Set LED_Mode parameter default to 9 in order to make CopterLEDS completely backwards compatible with old Motor LEDS and Piezo code. Legacy users should see no difference.
2012-05-15 12:00:21 -04:00
Robert Lefebvre
a285e2779f
CopterLEDS changes for APM2
2012-05-15 10:07:03 -04:00
rmackay9
24b81db20e
ArduCopter - LEDS - main code to support COPTER_LEDS.
...
Code by Robert Lefebvre
2012-04-12 22:55:44 +09:00
rmackay9
aa54458dcf
ArduCopter - leds.pde - changed refrences to "motor_armed" to "motors.armed()"
2012-04-04 22:57:50 +09:00
Jason Short
d1fcebb5ca
Cosmetic changes
...
GPS LED lock waits for home_is_set to be true
2012-01-28 21:19:46 -08:00
Andrew Tridgell
4fe527aefa
ACM: use LED_OFF/LED_ON instead of LOW/HIGH
2011-12-26 19:32:53 +11:00
Pat Hickey
4869ac3385
purple: use the new LED_ON/LED_OFF macros for LED level
...
this gets this right on both APM1 and purple for ArduCopter
2011-11-25 20:00:16 -08:00
Jason Short
9c5cba56eb
Added low voltage code flashing code.
2011-09-16 18:56:51 -07:00
Andrew Tridgell
1456a2a912
renamed top level directories
...
ArduCopterMega -> ArduCopter
added archives directory for old code
2011-09-09 11:27:41 +10:00
