Andrew Tridgell
b3af59cc0c
AP_InertialSensor: don't build L3G4200D example
2013-10-10 09:54:20 +11:00
Andrew Tridgell
a04c056598
AP_InertialSensor: remove unused get_last_sample_time_micros()
2013-10-10 09:54:19 +11:00
Andrew Tridgell
5d685385eb
AP_InertialSensor: use gyro sample count on L3G4200D
...
this gives more even timing in ArduCopter
2013-10-08 19:20:34 +11:00
Andrew Tridgell
6444b0bddd
AP_InertialSensor_L3G4200D: a sample is only available if gyro had a sample
2013-10-08 19:20:34 +11:00
Andrew Tridgell
e5e4cdee18
AP_InertialSensor: added wait_for_sample() API call
...
this waits for a new INS sample to arrive, using whatever method is
most efficient on each INS type
2013-10-08 17:31:15 +11:00
Andrew Tridgell
c17a5e5ed1
AP_InertialSensor: added a small delay in accel calibration
...
allows threads to run on Linux
2013-10-08 11:50:54 +11:00
Andrew Tridgell
12af23bb7c
AP_InertialSensor: added L3G4200D example
2013-10-08 11:50:53 +11:00
Andrew Tridgell
1aabd7155e
AP_InertialSensor: added L3G4200D driver
...
this is for a cheap ebay 10DOF sensor
2013-10-08 11:50:53 +11:00
Mike McCauley
c90c1b9998
AP_InertialSensor: Improvements to Flymaple sensors
...
Fix a bug that caused hang after 71 minutes. Use I2CDriver semaphore.
Remove test for in_accumulate: not needed.
2013-10-04 07:21:55 +10:00
Mike McCauley
9ea1108d4e
AP_InertialSensor: Flymaple filter constructor arguments non non-zero
2013-10-04 07:21:55 +10:00
Andrew Tridgell
dda68bddcb
AP_InertialSensor: updates for AP_HAL::MemberProc
2013-09-30 21:06:42 +10:00
Andrew Tridgell
1191607036
AP_InertialSensor: enable Oilpan on Linux
2013-09-29 00:57:13 +10:00
Andrew Tridgell
cf726c6642
AP_InertialSensor: rename Stub to HIL
...
more consistent with other drivers
2013-09-28 22:04:15 +10:00
Andrew Tridgell
03036c632d
AP_InertialSensor: use new scheduler API
2013-09-28 21:24:03 +10:00
Andrew Tridgell
096660c4f9
AP_InertialSensor: mark flymaple as nobuild
...
won't build with build_examples.sh script
2013-09-27 16:57:13 +10:00
Mike McCauley
e4eef61ec3
AP_InertialSensor: Flymaple sensors improvements
...
Flymaple sensors are now raw sampled at 800Hz, and LowPassFilter2p is used
to filter to the desired filter cutoff frequency.
Flymaple sensor polling is done in the main thread NOT in the timer
interrupts.
2013-09-27 15:45:59 +10:00
Mike McCauley
23429b6b9c
AP_InertialSensor: Flymaple now polls sensors at 800Hz. More changes to
...
come...
2013-09-27 15:45:57 +10:00
Mike McCauley
29bced05bd
AP_InertialSensor: Added examples/Flymaple for testing
2013-09-27 15:45:54 +10:00
Mike McCauley
d11f952ef1
AP_InertialSensor: Formalise and document Flymaple Gyro scaling factor
2013-09-27 15:45:52 +10:00
Mike McCauley
adfcdca074
AP_HAL_FLYMAPLE: Sensor reading improvements
...
I2C speed increased to 400kHz
Accelerometer 8g max, Normal power, 800Hz bandwidth
Gyros: 2000 degrees/sec, 256Hz LPF, 8kHz internal sample rate
2013-09-27 15:45:47 +10:00
Randy Mackay
f7ba0438ef
InertialSensor: remove DMP
...
this saves 3K of flash
2013-09-27 10:43:33 +09:00
Andrew Tridgell
14636e1cdf
AP_InertialSensor: changed num_samples_available() to sample_available()
...
this makes the interface clearer. It also fixes a 3D accel cal bug.
2013-09-27 10:49:00 +10:00
Andrew Tridgell
1ec5cbed81
AP_InertialSensor: removed SMACCM support
2013-09-26 22:38:31 +10:00
Mike McCauley
e4b5d0a3d6
AP_InertialSensor: Final Flymaple orientation fixes
2013-09-25 15:46:07 +10:00
Mike McCauley
276068356e
AP_InertialSensor: Further Flymaple orientation fixes
2013-09-25 15:46:07 +10:00
Mike McCauley
b02dbca9d4
AP_InertialSensor: fix orientation of Flymaple sensors
2013-09-25 15:46:07 +10:00
Mike McCauley
4d10a96077
AP_InertialSensor: Add flymaple support
2013-09-24 13:51:27 +10:00
Andrew Tridgell
770b7b5901
AP_InertialSensor: prevent a lockup in MPU6000 driver
...
thanks to the VRBrain port for noticing this bug.
Failing to get the semaphore is an expected error with the MPU6000, as
we read data both from timer context and mainline code. That means
semaphore conflicts are inevitable. We shouldn't consider them an
error, and shouldn't panic when some arbitrary number of them have
happened since boot.
Instead the wait_for_sample() code checks that we receive new data at
least every 50ms. That is a much safer test.
2013-09-23 22:48:36 +10:00
Andrew Tridgell
4d2bfe1078
AP_InertialSensor: fixed another example build
2013-09-19 21:09:34 +10:00
Andrew Tridgell
e1aa6e3ff1
libraries: fixed examples for no flash_leds() callback
2013-09-19 18:38:28 +10:00
Andrew Tridgell
f8e9d48a76
AP_InertialSensor: removed the flash_leds() callback
...
AP_Notify now handles this
2013-09-19 18:32:19 +10:00
Andrew Tridgell
7b3a674d66
AP_InertialSensor: added set_default_filter() method
2013-09-09 19:18:52 +10:00
Andrew Tridgell
396c4f30d2
AP_InertialSensor_PX4: don't set QUEUEDEPTH
...
the default of 2 samples is fine
2013-09-09 18:04:40 +10:00
Andrew Tridgell
8b80beadc4
PX4: make FMUv2 identify itself differently
...
so we can tell which is which in logs
2013-09-09 18:04:40 +10:00
Andrew Tridgell
ff0f6bcd42
AP_InertialSensor: fixed example build
2013-09-07 21:03:59 +10:00
Andrew Tridgell
5caf2e0ea4
AP_InertialSensor: fixed example build
2013-08-30 13:01:39 +10:00
Andrew Tridgell
65a490c209
AP_InertialSensor: update for new notify API
2013-08-30 13:01:35 +10:00
Randy Mackay
5651bdbe3a
INS: integrate AP_Notify
2013-08-30 13:01:35 +10:00
Andrew Tridgell
e5ad9dbd15
AP_InertialSensor: switch PX4 driver to fixed time per sample model
...
this makes the driver much simpler, and does away with the need for an
accumulate function
2013-08-30 13:01:33 +10:00
Andrew Tridgell
38fe89d661
AP_InertialSensor: switch to non-averaging system for PX4 IMUs
...
always use the latest value, based on a lowpass filter in the driver
2013-08-30 13:01:33 +10:00
Andrew Tridgell
46c5d18585
AP_InertialSensor: disable averaging on FMUv2
...
the new filter from Leonard means we shouldn't average values, and
instead just use the last value
2013-08-30 13:01:33 +10:00
Julian Oes
c3b27629ec
AP_InertialSensor: run PX4 FMUv2 at 800Hz
...
this gives much better noise suppression
2013-08-30 13:01:33 +10:00
Randy Mackay
effc829790
INS: relax accel offset check to 3.5 m/s/s
...
One user, Dusty, has found that even with offsets of 3.1 m/s/s
successful alt hold and loiter are possible
2013-07-13 10:43:07 +09:00
Randy Mackay
20ed00dcc9
AP_InertialSensor: relax accel offset sanity check
2013-06-25 14:19:42 +09:00
Andrew Tridgell
c92069644d
AP_InertialSensor: fixed indent-tabs-mode
2013-05-30 09:52:12 +10:00
Andrew Tridgell
807dbf9786
AP_InertialSensor: fixed a build warning
2013-05-24 11:21:42 +10:00
Andrew Tridgell
59b6118a1d
AP_InertialSensor: fixed parameter markup
2013-05-21 17:02:13 +10:00
Andrew Tridgell
fefbeacf86
AP_InertialSensor: use SEVERITY_USER_RESPONSE for accel cal messages
...
thanks to the suggestion from Kevin
2013-05-09 09:28:25 +10:00
Andrew Tridgell
8f57b72e3f
AP_InserialSensor: fixed example build
2013-05-08 16:45:31 +10:00
Andrew Tridgell
2ddeaa7f4d
AP_InertialSensor: show calibration offsets for success and failure
...
Pair-Programmed-With: Randy Mackay <rmackay9@yahoo.com>
2013-05-08 16:19:06 +10:00
