Andrew Tridgell
03714fc695
ACM: make it possible to set AHRS_GPS_GAIN on ArduCopter
...
this was affected by the AP_Param change, in particular the
constructor ordering. To ensure a user can set AHRS_GPS_GAIN to 1.0 if
they want to, we need to do a set_and_save() if the value isn't in
EEPROM
2012-08-08 17:36:01 +10:00
Andrew Tridgell
dc99586981
APM: removed pointless load() call
2012-08-08 16:51:23 +10:00
Andrew Tridgell
103b02fe94
ACM: removed pointless load() calls
2012-08-08 16:51:14 +10:00
Andrew Tridgell
dcc50b5705
AP_Airspeed: removed values passed to constructor
2012-08-08 16:38:39 +10:00
Andrew Tridgell
e6e25525bc
AP_Param: avoid saving values within 0.01% of the default value
...
this saves some more space due to rounding errors
2012-08-08 13:13:30 +10:00
Andrew Tridgell
45c27317ef
AP_Mount: fixed defaults for angles
...
this saves some eeprom space by not saving the 4500 values
2012-08-08 13:04:49 +10:00
Andrew Tridgell
2114acddf1
APM: fixed default flap speed
...
the default of 255 translates to -1 as a AP_Int8, so use zero to mean
no flaps
2012-08-08 13:04:21 +10:00
Andrew Tridgell
5bfd1200d6
APM: change variables to use _cm, _cd and _ms suffix for units
...
this makes it less likely that we mix up units
2012-08-08 12:12:30 +10:00
Andrew Tridgell
fb26160d3b
ACM: change to use get_bearing_cd() instead of get_bearing()
2012-08-08 12:12:30 +10:00
Andrew Tridgell
a5b5546e2a
Rover: change to use get_bearing_cd()
2012-08-08 12:12:30 +10:00
Andrew Tridgell
8ae35cae1c
AP_Math: rename get_bearing() to get_bearing_cd() to make units obvious
2012-08-08 12:12:30 +10:00
Andrew Tridgell
a823c9ceae
APM: removed cli slider and dipswitch options
...
use mavlink/eeprom for all config
2012-08-08 12:12:29 +10:00
Andrew Tridgell
dfac01e6f1
AP_Param: updated APMrover2 code for new AP_Param syntax
2012-08-08 12:12:29 +10:00
Andrew Tridgell
c2a4d59132
AP_Param: update ArduCopter core for new AP_Param interface
2012-08-08 12:11:57 +10:00
Andrew Tridgell
12cd6b68ff
AP_Param: update ArduPlane core for new AP_Param interface
2012-08-08 12:11:57 +10:00
Andrew Tridgell
9355bd6832
AP_Param: update VARTest for new AP_Param interface
2012-08-08 12:11:57 +10:00
Andrew Tridgell
7ff7514a88
SITL: added pgm_read_dword() and pgm_read_float()
2012-08-08 12:11:57 +10:00
Andrew Tridgell
518d6365ff
AP_Param: update remaining libraries for new constructor syntax
2012-08-08 12:11:57 +10:00
Andrew Tridgell
898a5af692
AP_Param: update AHRS for new constructor syntax
2012-08-08 12:11:57 +10:00
Andrew Tridgell
5e8fe8d93e
AP_Param: update PID libraries for new constructor syntax
2012-08-08 12:11:57 +10:00
Andrew Tridgell
c298d5130f
AP_Param: major update to use default values in var_info table
...
this stores the default value for all scalar variables in the var_info
table, which makes it possible to avoid storing default values in
eeprom. That allows us to oversubscribe the eeprom space with a much
lower risk of overrun.
2012-08-08 12:11:57 +10:00
Andrew Tridgell
1b099344a3
Rover: fixed build with new RC_Channel code
2012-08-08 12:11:05 +10:00
Andrew Tridgell
a7b9aff79f
AP_Baro: the DerivativeFilter now handles duplicate data
...
this saves a few bytes of memory
2012-08-08 12:07:36 +10:00
Andrew Tridgell
77f3b60b6f
Filter: make the DerivativeFilter test GNUPlot friendly
...
makes testing easier
2012-08-08 12:07:36 +10:00
Andrew Tridgell
899eeb608b
Filter: automatically cope with duplicate timestamps
...
this makes it easier for callers to avoid excessive slope calculations
Thanks to Jon Challinger for the idea
2012-08-08 12:07:35 +10:00
Jonathan Challinger
7815e3d810
APM: fixed rounding of altitude
...
the cast was rounding to the nearest meter
2012-08-08 12:07:35 +10:00
Andrew Tridgell
d7d33c64b7
Filter: fixed a off-by-one DerivativeFilter bug
...
many thanks to Jon Challinger for noticing this!
2012-08-08 12:07:35 +10:00
rmackay9
f79b90725e
ArduCopter: Dan Gray's fix for Condition_Yaw
...
command_yaw_dir is an unsigned byte but was being set to a -ve number leading to very incorrect yaw target heading for counter clockwise turns.
command_yaw_end (i.e. turn's end target) was not being set if turn was of type "relative"
2012-08-07 06:43:10 -07:00
Michael Oborne
45d21c7b5e
Merge branch 'master' of https://code.google.com/p/ardupilot-mega
2012-08-07 19:27:16 +08:00
Michael Oborne
f90d4b7ead
Mission Planner 1.2.4
...
remove geofence tab
add guided alt remeber
change wp upload retry to 200 ms
2012-08-07 19:26:10 +08:00
Amilcar Lucas
d9f1140278
ArduCopter: Use generic channel names for AP_Mount servos.
...
This simplifies mission planner, the same code can be used for plane and copter now.
2012-08-06 23:33:51 +02:00
Amilcar Lucas
e93daca17e
Fix heli compilation
2012-08-06 23:30:02 +02:00
Michael Oborne
f843b42e5b
Mission Planner 1.2.3
...
hud font move
add progress bar lock
add quickview mono fix
fix centi-degree/degree units
fix mnt config camera tab
fix some meters/feet scaling issues
2012-08-06 22:22:57 +08:00
Amilcar Lucas
2c4a0636f3
AP_Mount: move mount to a "retracted position" into the fuselage with a fourth servo
2012-08-06 01:27:29 +02:00
Amilcar Lucas
f14237126a
Add me :)
2012-08-06 00:40:12 +02:00
Amilcar Lucas
aa3cc63b15
ArduCopter: Make the code fit in a 1280 chip again
...
Even allows to control a camera/antenna mount, if the user explicitly wants to.
2012-08-06 00:23:48 +02:00
Amilcar Lucas
0106c133cf
Default CLI_SLIDER_ENABLED to DISABLED
...
Chris asked for this on the mailing list
2012-08-06 00:22:33 +02:00
Amilcar Lucas
af08b630cd
Spellcheck in comments
2012-08-06 00:21:14 +02:00
Amilcar Lucas
107155fa1a
AP_Mount: Allow using any RC channel to control any of the mount axes.
...
This has the added benefit of saving 60 bytes and simplifying Mission Planner gui.
Moved some code from RC_Channel_aux to AP_Mount class
The servos get written by the update_mount_position() function, this simplifies main()
PS: The beauty of using libraries: I did not have to touch a single line of ArduPlane's code!
2012-08-05 23:48:57 +02:00
Amilcar Lucas
b8c7b8a786
RC_Channel: Allow each channel to know who they are, this simplifies the enabling and output function calls.
2012-08-05 23:08:31 +02:00
Amilcar Lucas
afd96025a7
ArduCopter: Save more space in APM1280
2012-08-05 23:05:52 +02:00
Amilcar Lucas
9c1ac2d9e6
More work on ch9, 10 and 11
2012-08-04 19:44:41 +02:00
Amilcar Lucas
95f2af6d2d
Implement set ROI
2012-08-04 18:44:29 +02:00
Amilcar Lucas
4ba847c449
The mount type must be updated periodically
2012-08-04 18:44:08 +02:00
Amilcar Lucas
bbc4bdb729
More flexible RC support
2012-08-04 18:39:20 +02:00
Amilcar Lucas
d29f7023cc
Merge from ArduPlane
2012-08-04 18:38:50 +02:00
Amilcar Lucas
50b5d33745
Enable camera triggering by default
2012-08-04 16:32:47 +02:00
Amilcar Lucas
82b82283be
ATmega1280 does not have enough memory for mount support so disable AUTO GPS support, to allow mount support to fit.
...
This should almost have no side effects, because the most users use MTK anyways.
If the user defined a GPS protocol, than we will NOT overwrite it
2012-08-04 16:32:20 +02:00
Michael Oborne
7a887bb27d
Mission Planner 1.2.2
...
add DegreeTracker
fix popout tab on config page
add remember last config tab
fix bytes send count
fix deactivate bug
fix ap_limits bug
fix ap_mount bug
2012-08-02 18:04:54 +08:00
Michael Oborne
e0e0fe0ce5
firmware build
2012-08-01 15:24:39 +08:00