Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
15,376 Commits 70 Branches 507 Tags 615 MiB
Commit Graph

7157 Commits

Author SHA1 Message Date
Andrew Tridgell a8a8628515 AP_InertialSensor: added INS_CALSENSFRAME parameter 
this allows us to detect if accel calibration was done in sensor frame
or not. If it was done in sensor frame then the accel calibration is
independent of AHRS_ORIENTATION, which makes it easier to move a board
to a new airframe without having to recalibrate.
 2015-03-12 12:50:28 +11:00
Jonathan Challinger bc655ff0cc AP_InertialSensor_PX4: add optional debug 2015-03-12 12:50:28 +11:00
Jonathan Challinger 074ee49cd0 AP_InertialSensor_PX4: interleave accel and gyro samples by time 2015-03-12 12:50:28 +11:00
Jonathan Challinger addf80b669 AP_InertialSensor_PX4: explicitly configure sensors, publish deltas 2015-03-12 12:50:27 +11:00
Jonathan Challinger b5131b7b64 AP_InertialSensor: add coning.py example 2015-03-12 12:50:27 +11:00
Jonathan Challinger 2a547f329b AP_InertialSensor: allow backends to publish delta velocities and angles 2015-03-12 12:50:27 +11:00
Jonathan Challinger 155c173ed1 AP_InertialSensor: rename _rotate_and_offset to _publish 2015-03-12 12:50:27 +11:00
Jonathan Challinger 502446d821 AP_InertialSensor: use LowPassFilter2pVector3f 2015-03-12 12:50:27 +11:00
Jonathan Challinger 0133f0bb57 LowPassFilter2p: split into LowPassFilter2pfloat and LowPassFilter2pVector3f 2015-03-12 12:50:27 +11:00
ustas a2d5ac6805 AP_GPS: add includes for success build example sketch 
include AP_Scheduler.h for achieve build GPS_UBLOX_passthrough example
 2015-03-11 21:30:31 +09:00
mirkix 4f1dd85e47 AP_HAL: Add test sketch for RC input to RC output pass through 2015-03-11 21:14:15 +09:00
Randy Mackay 12724e9556 AC_PID: remove include of stdio.h 2015-03-11 20:40:05 +09:00
Randy Mackay cc0d5b9ced AC_PI_2D: replace set_filt_hz method with filt_hz 
Thanks to Jonathan Challinger for spotting this bug
 2015-03-11 17:28:36 +09:00
Randy Mackay c10b0b34ca AC_PID: replace set_filt_hz method with filt_hz 
Thanks to Jonathan Challinger for spotting this bug
Also add sanity check to filt_hz
 2015-03-11 17:28:20 +09:00
Jonathan Challinger 88ec13b10d AC_PosControl: fix build 2015-03-11 10:00:00 +09:00
Randy Mackay 50d2e98aa4 AC_AttControl: init throttle_hover in constructor 2015-03-10 22:10:36 +09:00
Randy Mackay 965db2c7f7 AC_PosControl: add comments and defines for jerk limits 2015-03-10 22:10:34 +09:00
Jonathan Challinger 4408c1b935 AC_PosControl: 2d jerk constraint in accel_to_lean_angles 2015-03-10 22:10:32 +09:00
Jonathan Challinger 9871b95586 AC_PosControl: fix dt sanity checking 2015-03-10 22:10:30 +09:00
Jonathan Challinger e7efe23fb5 GCS_MAVLink: reserve message IDs for future feature additions 2015-03-10 15:30:14 +09:00
Randy Mackay 5e26450a6f AP_Motors: make THR_LOW_COMP a variable instead of param 2015-03-10 12:20:27 +09:00
Leonard Hall 007c96a3d8 AP_Motors: Low throttle compensation setters 2015-03-10 12:20:21 +09:00
Leonard Hall 6275ee0289 AP_Motors: Check for battery voltage reading fail 2015-03-10 12:20:19 +09:00
Randy Mackay 5f26a36060 INS: protect against two calibrations running at the same time 2015-03-09 17:58:38 +11:00
Randy Mackay f9c6e35d19 INS: add calibrating method 2015-03-09 17:58:38 +11:00
Randy Mackay b0e7990c90 INS: set gyro_cal_ok only after completing calibration 2015-03-09 17:58:37 +11:00
Andrew Tridgell aec7907571 AP_InertialSensor: updated comment on accel check in gyro cal 2015-03-09 17:58:36 +11:00
Andrew Tridgell 494e909703 AP_InertialSensor: ensure accel cal completion messages get through 2015-03-09 07:36:50 +11:00
Andrew Tridgell 38bde56523 AP_InertialSensor: continue finding best gyro after convergence 
with multiple gyros if we are still calibrating one of the gyros then
keep looking for better values for the already converged gyros.
 2015-03-08 07:49:38 +11:00
Andrew Tridgell 20a4c98bac AP_InertialSensor: use accelerometers to prevent bad gyro cal 
if the board is rotating at a steady rate we can end up with a bad
gyro calibration. This can happen on a steadily moving platform such
as a ship.

This uses the accelerometers to detect the steady movement and not
accept the gyro calibration
 2015-03-08 07:48:16 +11:00
Andrew Tridgell 434d094993 AP_InertialSensor: allow MAVLink packets to flow during accelcal 
this uses the snoop functionality of GCS_MAVLink to allow the delay
callback to be used during accel calibration
 2015-03-07 21:56:39 +11:00
Andrew Tridgell af7765c57c GCS_MAVLink: fixed typo 2015-03-07 13:54:58 +11:00
Andrew Tridgell ac848dc103 GCS_MAVLink: zero packet data before reply in serial control 2015-03-07 13:53:44 +11:00
Randy Mackay 7675160e33 Notify: add firmware update flag and implement for OreoLED 2015-03-06 17:26:51 +09:00
Jace A Mogill 442d07a6c9 Notify: OreoLED fast startup with solid green 
For manual flight modes: Solid white in front, red in rear
For automatic flight modes: Breathing white in front, red in rear
Loss of RC: Alternating red/black in front and rear

merge with fast green
 2015-03-06 17:26:45 +09:00
Jonathan Challinger e2383581cc AC_AttitudeControl: relax_bf_rate_controller resets rate integrators 2015-03-06 14:02:57 +09:00
Leonard Hall 3ad9b1a06b AP_MotorsMatrix: remove incorrect throttle limit flag 2015-03-06 14:02:55 +09:00
Leonard Hall 20de383084 AC_AttControl: accel limiting for angular control only if feed forward enabled 2015-03-06 14:02:52 +09:00
Jonathan Challinger d148039f65 AP_Motors: stricter batt_voltage misconfiguration check 2015-03-06 14:02:49 +09:00
Leonard Hall 7de5bccc93 AC_PosControl: remove THR_HOVER parameter 
Parameter is set by main code so no need to store to eeprom
 2015-03-06 14:02:46 +09:00
Leonard Hall 9866eaded1 AC_PosControl: rename p_alt_pos to p_pos_z 
Also pid_alt_accel to pid_accel_z
 2015-03-06 14:02:44 +09:00
Leonard Hall 349f1aeceb AC_PosControl: use 2-axis PI controller 2015-03-06 14:02:42 +09:00
Leonard Hall 8d4f0ec80c AC_PosControl: integrate PID input filter 2015-03-06 14:02:39 +09:00
Randy Mackay e4d48fdc92 AC_AttControlHeli: separate accel max for roll, pitch 
renamed _accel_y_max to _accel_yaw_max
 2015-03-06 14:02:36 +09:00
Leonard Hall 51455af51a AC_AttConHeli: integrate PID input filter 2015-03-06 14:02:35 +09:00
Leonard Hall 792b2a2eb3 AC_AttControl: separate accel max for roll, pitch, yaw 
Also add:
Rate filters
rename rate filter defines
d-term only filter for roll, pitch rate control
accessors to save max accel for roll, pitch, yaw
fix for duplicate ACCEL_Y_MAX param
 2015-03-06 14:02:33 +09:00
Leonard Hall 9833c91b2b AC_AttControl: get_max_rate_step_bf_roll, pitch and yaw 2015-03-06 14:02:30 +09:00
Leonard Hall f00025e5c9 AC_AttControl: accessor for rate feedforward 2015-03-06 14:02:27 +09:00
Leonard Hall 691fb8947e AC_AttControl: accessor for rate_bf_targets 2015-03-06 14:02:25 +09:00
Leonard Hall 784a4ce51a AC_AttControl: increase max angle overshoot to 30deg 2015-03-06 14:02:23 +09:00
Leonard Hall eb084f7c58 AC_AttControl: bf yaw control uses input filtered PID 2015-03-06 14:02:21 +09:00
Leonard Hall 11a19803e0 Motors: add accessors for motor logging 
accessor include get_roll, get_pitch, get_yaw, throttle input
 2015-03-06 14:01:58 +09:00
Leonard Hall 34a5bc8b33 AC_PI_2D: 2-axis PI controller 2015-03-06 14:01:56 +09:00
Leonard Hall 046949ea8a AC_HELI_PID: add input filter and restructure 
Also removed unused initial_ff from construtor
 2015-03-06 14:01:54 +09:00
Leonard Hall 517448e536 AC_PID: add input filtering and restructure 2015-03-06 14:01:52 +09:00
Andrew Tridgell 2aae594371 GCS_MAVLink: handle serial loopback in routing 2015-03-04 20:24:11 +11:00
Andrew Tridgell 086f878bdc HAL_PX4: split IO thread into separate IO and storage threads 
this prevents a blocked microSD card from blocking IO to the FRAM,
causing parameter changes not to be sticky
 2015-03-04 20:18:17 +11:00
Andrew Tridgell 58c92b0158 GCS_MAVLink: added SCALED_IMU3 logging 2015-03-04 19:30:08 +11:00
Andrew Tridgell 79be500e04 GCS_MAVLink: re-generate headers 2015-03-04 19:29:28 +11:00
Andrew Tridgell eeacbe518b GCS_MAVLink: update from upstream XML 2015-03-04 19:21:24 +11:00
Randy Mackay f5f7cd540f Motors: fix example sketches 2015-03-03 21:39:24 +09:00
Leonard Hall cf8c211c35 Motors: fix thrust curve and add constraint 2015-03-03 15:49:07 +09:00
Leonard Hall 3e960dfc3b Motors: add get_voltage_comp_gain 
This clarifies that lift_max is the inverse of the battery voltage gain
compensation
 2015-03-03 15:49:04 +09:00
Leonard Hall 997c6f0868 Motors: move battery resistance calcs to parent 
Moving from MotorsMatrix to parent Motors class allows these to be used
from other frame types
Also initialise battery resistance
 2015-03-03 15:49:02 +09:00
Randy Mackay 09d7cdbc23 Motors: batt_voltage_filt becomes filter object 2015-03-03 15:49:00 +09:00
Randy Mackay 4b78b2ce80 Filter: add get method to LowPassFilter 2015-03-03 15:48:58 +09:00
Leonard Hall 529c6fed3a Motors: move over current throttle limiting to parent 
Moving from MotorsMatrix to parent Motors class allows this to be used
from other frame types
 2015-03-03 15:48:54 +09:00
Randy Mackay 812473fd9a MotorsMatrix: use get_hover_throttle_as_pwm 2015-03-03 15:48:52 +09:00
Randy Mackay 1a9d3125ef Motors: _hover_out to pct * 10 instead of pwm 2015-03-03 15:48:50 +09:00
Leonard Hall 6b7bdf64bd Motors: move batt voltage lift_max calcs to parent 
Moving from MotorsMatrix to parent Motors class allows them to be used
by other frame types
Also added sanity check of batt_voltage_min
 2015-03-03 15:48:48 +09:00
Randy Mackay c549b58eb7 MotorsMatrix: remove check of throttle_curve_enabled 2015-03-03 15:48:46 +09:00
Randy Mackay 5fb3de48ee MotorsTri, Single, Coax: use new thrust curve 2015-03-03 15:48:44 +09:00
Randy Mackay 2eaa4a8445 Motors: remove old throttle curve 2015-03-03 15:48:42 +09:00
Leonard Hall 751dbb7df7 Motors: move thrust curve and volt scaling to parent 
Moving from MotorsMatrix to Motors allows it to be used from other frames
 2015-03-03 15:48:41 +09:00
Randy Mackay 80b498f598 Motors: add loop_rate to test sketch 2015-03-03 15:48:39 +09:00
Randy Mackay 7ab76dbd0e Motors: add loop_rate to constructor for all frames 2015-03-03 15:48:34 +09:00
Randy Mackay 77d4b3a2ae Motors: add loop_rate to constructor 2015-03-03 15:48:32 +09:00
Leonard Hall ec9d7dd99e Motors: minor comment fixes 2015-03-03 15:48:30 +09:00
Leonard Hall 1d0ee68116 Motors: over current throttle limiting 2015-03-03 15:48:28 +09:00
Randy Mackay 1217ab9579 BattMon: add get_type method 2015-03-03 15:48:24 +09:00
Randy Mackay f6523c0997 Motors: Add THR_LOW_CMP to adjust low throttle inputs affect on attitude control 2015-03-03 15:48:21 +09:00
Leonard Hall 83e3e2fec2 Motors: thrust curve and voltage scaling for matrix supported frames 2015-03-03 15:48:19 +09:00
Leonard Hall 5b0bd49ff2 Motors: configurable yaw headroom for matrix frames 2015-03-03 15:48:15 +09:00
Randy Mackay 51213235b4 OreoLED_PX4: available only on PX4 2015-03-02 16:58:17 +09:00
Randy Mackay f1ce70e748 Notify: disable oreoled by default 2015-03-02 16:58:14 +09:00
Randy Mackay 89cd74c35f Notify: OreoLED supports handle_led_control 
includes support for send bytes ioctl
 2015-03-02 16:58:12 +09:00
Randy Mackay 90cac02bd7 Notify: OreoLED fix to fade-in when armed 2015-03-02 16:58:10 +09:00
Randy Mackay 35a3a52f29 Notify: add support for handle_led_control 2015-03-02 16:58:06 +09:00
Randy Mackay 9159c7107d GCS_MAVLink: version update after LED_CONTROL added 2015-03-02 16:58:03 +09:00
Randy Mackay 26d54398e2 GCS_MAVlink: generate after LED_CONTROL added 2015-03-02 16:58:01 +09:00
Randy Mackay 3fdabb3667 GCS_MAVlink: define LED_CONTROL in ardupilotmega.xml 2015-03-02 16:57:59 +09:00
Randy Mackay b8ef765b3e Notify: add OreoLED to PX4 2015-03-02 16:57:56 +09:00
Randy Mackay 0a33a7c15a Notify: OreoLED_PX4 driver 2015-03-02 16:57:50 +09:00
Jonathan Challinger e9bbe062f3 AC_PosControl: modify accel_to_lean_angles to apply filters before yaw rotation 2015-02-24 16:41:03 +09:00
Andrew Tridgell 1f417dce86 AP_SerialManager: added note on external converter requirement for Frsky 
thanks to Luis for the suggestion
 2015-02-24 10:19:42 +11:00
Andrew Tridgell a6d76b4e03 AP_RangeFinder: added PX4-PWM rangefinder 
uses PWM input driver to read a rangefinder
 2015-02-23 14:15:14 +11:00
Randy Mackay b650d39786 InertialSensor: remove product_id set to zero 2015-02-21 09:14:33 +09:00
Jonathan Challinger 7b0e806db1 AP_Mount: correct status_msg to conform to MAVLink specification 2015-02-21 08:33:50 +09:00
Andrew Tridgell 3a51bac0d0 AP_Arming: use new enum for home_is_set 2015-02-21 10:13:43 +11:00
Andrew Tridgell a53395cdb8 AP_Common: added HomeState enum from copter 2015-02-21 10:13:17 +11:00