Andrew Tridgell
83cac93e85
Plane: allow for any orientation of rangefinder for landing
...
this is principally for tailsitters where rangefinders would be
orientation with RNGFND1_ORIENT=12 (PITCH_180), but also allows for
custom orientations which will be useful if the rangefinder is tilted
forward
2024-09-14 08:39:51 +10:00
Andrew Tridgell
2f19dfef8a
Plane: added glider pullup support
2024-09-10 10:15:34 +10:00
Peter Barker
c2f5c48fe5
Plane: rename OFFBOARD_GUIDED to AP_PLANE_OFFBOARD_GUIDED_SLEW_ENABLED
...
and remove comparison vs ENABLED
2024-08-05 10:20:14 +10:00
George Zogopoulos
c213ee2ef8
Plane: Converted paramter TKOFF_MODE into TKOFF_OPTIONS
2024-07-29 15:50:32 +10:00
George Zogopoulos
773c91cec1
ArduPlane: Added minimum throttle during TAKEOFF mode
...
This is a rework so that servos.cpp is responsible for setting the
throttle limits under more circumstances and always notifies TECS when
it does so.
Additionally, the TAKEOFF mode has been improved with a new parameters
TKOFF_MODE and TKOFF_THR_MIN that extend the throttle behaviour.
2024-07-29 15:50:32 +10:00
Michael du Breuil
80277e6da0
ArduPlane: Add a stall speed parameter
2024-07-23 10:37:24 +10:00
Andrew Tridgell
a4109c6cf2
Plane: compile in AC_PrecLand for scripting
2024-03-06 09:39:51 +11:00
Peter Barker
3085816a16
ArduPlane: move serial_manager parameters up to base class
2024-02-29 12:12:19 +11:00
Peter Barker
d2d89b02cc
ArduPlane: move gripper up to AP_Vehicle
...
also make the singleton return a reference rather than a pointer
2024-02-21 21:05:12 +11:00
Peter Barker
33895e8816
Plane: move scripting up to AP_Vehicle
2024-02-07 18:24:12 +11:00
Peter Barker
0bc2c15485
Plane: move AP_Stats to AP_vehicle
2024-01-30 11:12:21 +11:00
Andrew Tridgell
e602aa68a4
Plane: removed incorrect comment
2024-01-23 15:00:30 +11:00
Andrew Tridgell
89a947cdca
ArduPlane: change LIM_ROLL_CD to ROLL_LIMIT_DEG
2024-01-23 15:00:30 +11:00
Andrew Tridgell
17d6192e22
ArduPlane: convert LIM_PITCH_MIN/MAX -> PTCH_LIM_MIN/MAX_DEG
2024-01-23 15:00:30 +11:00
Andrew Tridgell
a3d622b37d
Plans: rename ALT_CRUISE_MIN to CRUISE_ALT_FLOOR
2024-01-23 15:00:30 +11:00
Andrew Tridgell
8151647e04
ArduPlane: convert ALT_HOLD_RTL and ALT_HOLD_FBWCM
2024-01-23 15:00:30 +11:00
Andrew Tridgell
5723b1c780
ArduPlane: convert MIN_GNDSPEED_CM to MIN_GROUNDSPEED
2024-01-23 15:00:30 +11:00
Andrew Tridgell
94edcc4654
ArduPlane: change TRIM_ARSPD_CM to AIRSPEED_CRUISE
2024-01-23 15:00:30 +11:00
Tim Tuxworth
3cf0de2224
Plane: convert parameter TRIM_PITCH_CD to TRIM_PITCH_DEG
2024-01-23 15:00:30 +11:00
Iampete1
ab0755d0d8
Plane: rework forward throttle votlage compensation into sub class and split min/max from throttle
2023-12-20 19:28:47 +11:00
Thomas Watson
f20893259d
Plane: remove references to legacy UART order
2023-12-19 06:53:15 +11:00
Mykhailo Kuznietsov
b7c040e8bc
ArduPlane: Fix some typos
...
Fixed some typos found in the code.
2023-10-12 18:30:42 +11:00
Iampete1
9381e2f411
Plane: GuidedHeading PID: remove slew limit
2023-10-03 11:28:18 +11:00
Andy Piper
15655a9c24
Plane: add AUTOTUNE_OPTIONS flags to allow filter updates to be disabled
2023-08-23 18:06:22 +10:00
Shiv Tyagi
ecdc036eb6
Plane: use AP_FOLLOW_ENABLED
2023-08-15 09:57:35 +10:00
Iampete1
2f4b617464
Plane: remove SYS_NUM_RESETS, replaced by STAT_BOOTCNT
2023-06-20 11:10:36 +10:00
Andrew Tridgell
77e63da4b3
Plane: added TKOFF_THR_MAX_T
...
time for max throttle on takeoff if no airspeed sensor
2023-01-15 12:17:27 +11:00
Iampete1
4e00a460fb
ArduPlane: use shared param info defines
2023-01-11 18:41:34 +11:00
Peter Barker
0cf56ea320
ArduPlane: make and use AP_LANDINGGEAR_ENABLED
2022-12-14 18:30:23 +11:00
Henry Wurzburg
a84f6b6dee
Plane: added AUTOTUNE_AXES function to normal tune
...
Co-authored-by: Peter Hall
2022-11-08 10:54:36 +11:00
Peter Barker
9e0894c93a
ArduPlane: add AP_GRIPPER_ENABLED
2022-10-04 10:58:34 +11:00
Iampete1
2b8958f931
Plane: Fence moved to vehicle
2022-07-27 19:04:56 +10:00
Peter Barker
b0bee613d4
ArduPlane: add and use AP_ICENGINE_ENABLE
2022-07-22 08:48:16 +10:00
Andrew Tridgell
680162cef0
Plane: added a value for RTL_AUTOLAND to disable arming check
...
set RTL_AUTOLAND=3 to get go-around but not RTL DO_LAND_START usage
2022-03-23 20:22:58 +11:00
Andrew Tridgell
3fe9a55269
Plane: added APIs for lua ship landing
2022-03-10 07:34:20 +11:00
Andrew Tridgell
c54fb0f51b
Plane: link in AP_Follow
...
ready for ship landing
2022-03-10 07:34:20 +11:00
Joshua Henderson
c1abcfb7c4
Plane: move Airspeed to AP_Vehicle
2022-01-19 18:21:32 +11:00
Andrew Tridgell
b619ee4970
Plane: added support for rate yaw control
...
to enable for ACRO mode, set ACRO_YAW_RATE to desired maximum rate in
degrees/second, and set YAW_RATE_ENABLE=1 to enable PID tuning of yaw
rate controller
pair programmed with Andy Palmer and Matthew Hampsey
2021-11-30 16:19:26 +11:00
Peter Barker
70562021ac
ArduPlane: move from ENABLE_SCRIPTING to AP_SCRIPTING_ENABLED
2021-11-15 20:27:40 +11:00
Peter Barker
203103bae5
ArduPlane: ensure ENABLE_SCRIPTING is always defined
2021-11-15 20:27:40 +11:00
Peter Barker
554e7f8d1c
ArduPlane: move EFI to AP_Vehicle
2021-11-05 09:22:17 +11:00
Peter Barker
6a12d3f5d9
Plane: use enum class for StickMixing
2021-11-03 18:06:00 +11:00
Iampete1
8e693e5cd1
Plane: remove TRIM_AUTO param
2021-09-28 09:16:24 +10:00
Iampete1
b18da48f39
Plane: remove AUTO_FBW_STEER
2021-09-12 22:12:32 -05:00
Iampete1
e6968395c6
Plane: remove none-functional NAV_CONTROLLER param
2021-09-08 20:32:52 +09:00
Iampete1
fd7a879c85
Plane: remove unused params
2021-09-08 17:21:23 +10:00
Iampete1
88f2f7ccae
Plane: remove unused param OVERRIDE_SAFETY
2021-09-01 18:46:18 +10:00
Peter Barker
bfe9208849
ArduPlane: add and use HAL_BUTTON_ENABLE
2021-08-25 19:03:42 +10:00
Andrew Tridgell
f472da8e90
Plane: added ONESHOT_MASK parameter
...
after discussion with Paul on servo latency
2021-07-23 14:47:14 +10:00
Andrew Tridgell
1ae669bb01
Plane: added manual input expo for MANUAL, ACRO and TRAINING
...
this is easier than setting up mode specific expo in radios for flying
in manual modes
2021-07-23 14:47:14 +10:00