petrosilius
1d810bfa6f
AP_Scripting: added tracker Pelco-D control script
...
This script uses the scaled output from the antennatracker servos and map them to corresponding Pelco-D messages to be sent via a RS-485 interface to a motorized base (can be anything from motorized tracker to a PTZ camera).
If your FCU doesnt offer a RS-485 interface by default, you can use or TTL-RS485- or USB-RS485-adapters.
Pelco-D allows to control using either speed-/differential- or absolute-control control of the pan-/tilt-axis.
Currently the script uses speed based control using by mapping the "ContinuousRotation" type servos outputs to the corresponding Pelco-D messages.
The absolute control messages are implemented nevertheless for future use.
The script assumes therefor at least the following parameters to be set:
SCR_ENABLE = 1
SERVO_PITCH_TYPE = 2 # ContinuousRotation type servo
SERVO_YAW_TYPE = 2 # ContinuousRotation type servo
SERIALx_PROTOCOL = 28 # serial port used by luascript
Additionally the PITCH2SRV and YAW2SRV tuning needs to be done as described by the antennatracker description.
Also keep attention to the PITCH_MIN, PITCH_MAX and YAW_RANGE parameters to fit your Pelco-D hardware!
2024-05-28 17:42:52 +10:00
Andrew Tridgell
e0af22ad8f
SITL: update to work on newer cygwin versions
2024-05-28 11:33:38 +10:00
Iampete1
3f6ce2dc09
AP_DroneCAN: Serial: map baudrates so param works as expected
2024-05-28 10:27:20 +10:00
Peter Barker
720c8719dc
waf: boards.py: use chibios_hwdef.py to get boards list
2024-05-28 10:25:39 +10:00
Peter Barker
a669249416
GCS_MAVLink: default support for BATTERY2 sending to off
...
replaced by BATTERY_STATUS
2024-05-28 10:11:37 +10:00
Iampete1
f5e7bfcc48
AP_Scripting: remove support for REPL
2024-05-28 10:10:14 +10:00
rotorman
0962b759b0
AP_HAL_ChibiOS: adds Flywoo/Goku F405 HD 1-2S ELRS AIO v2 flight controller support
...
Co-authored-by: Henry Wurzburg <hwurzburg@yahoo.com>
2024-05-28 09:57:14 +10:00
MattKear
0a6fa4f886
AP_SurfaceDistance: Start library for tracking the floor/roof distance
2024-05-28 09:55:36 +10:00
Iampete1
e10b4abad8
ChibiOS: UART: Add support for RS-485 Driver Enable RTS flow control
2024-05-28 09:48:19 +10:00
Iampete1
e6a0abdfce
AP_HAL_ChibiOS: hwdef.py: find alt function for UART RTS and add to init struct
2024-05-28 09:48:19 +10:00
Iampete1
0959930289
AP_BoardConfig: update RTSCTS param values for new option
2024-05-28 09:48:19 +10:00
Iampete1
50fd01af97
GCS_MAVLink: use new `flow_control_enabled` helper
2024-05-28 09:48:19 +10:00
Iampete1
713eda617f
AP_Scripting: allow new flow control type in `set_flow_control` binding
2024-05-28 09:48:19 +10:00
Iampete1
d340f37678
AP_HAL: UARTDriver: Add new flow control option "FLOW_CONTROL_RTS_DE" for RS485 driver enable.
2024-05-28 09:48:19 +10:00
Thomas Watson
0956b4f65d
AP_HAL_SITL: remove deprecated --uartX options
...
Code remains to check for use of these options and give an error which
contains the correct option to use, due to the non-intuitive mapping
between --uartX and --serialN.
A future version will remove that code too.
2024-05-28 09:23:39 +10:00
Thomas Watson
d2456f4199
SITL: remove references to legacy UART order
2024-05-28 09:23:39 +10:00
burgeruser
458cb0a1c9
AP_HAL_ChibiOS: bi-directional dshot on iomcu F103 8MHz
2024-05-28 06:56:14 +10:00
Rhys Mainwaring
33d51d52ad
AP_DDS: ensure zero rotation quaternions are normalised
...
- ROS expects quaternions to be normalised and the default message constructor does not enforce this.
- Fix normalisation for pose stamped.
Signed-off-by: Rhys Mainwaring <rhys.mainwaring@me.com>
2024-05-26 09:46:48 +10:00
Stephen Dade
d16ff40162
RC_Channel: detect duplicate aux functions with an ID >256
2024-05-24 09:57:17 +10:00
Paul Riseborough
91423d4c71
AP_NavEKF3: Remove unncessary local position height reporting offset
...
The offset generated by the EK3_OGN_HGT_MASK parameter bit 2 option is applied to the baro or range finder sensor so it does not have to be applied to the local position height.
2024-05-23 10:35:51 +10:00
Paul Riseborough
5fded75eb6
AP_NavEKF3: Adjust sensor height when EK3_OGN_HGT_MASK bit 2 is set
2024-05-23 10:35:51 +10:00
David O'Connor
77adb5586d
AP_HAL_ChibiOS: Added mag and dataflash logging support to AnyLeaf H7
2024-05-23 09:48:02 +10:00
Peter Barker
b7cf418d1e
GCS_MAVLink: allow handling of AP_MAVLINK_MSG_HIL_GPS_ENABLED to be compiled out
2024-05-23 09:16:32 +10:00
Peter Barker
05b8c28ea9
AP_GPS: allow handling of AP_MAVLINK_MSG_HIL_GPS_ENABLED to be compiled out
2024-05-23 09:16:32 +10:00
Alex Burka
8e399cffbe
AP_InternalError: fix signedness issue with snprintf
2024-05-22 23:22:23 +10:00
Iampete1
0c6f396438
AP_Scripting: docs: document all functions currently documented on the wiki
2024-05-22 18:13:53 +10:00
Peter Barker
482342340d
hwdef: fold minimal_GPS.inc into sole user
2024-05-22 18:03:06 +10:00
Randy Mackay
72b5efd8b3
AP_Mount: serial backends gets instance
2024-05-22 18:00:22 +10:00
Randy Mackay
99626b73ff
AP_Mount: SToRM32_serial inherits from serial backend
2024-05-22 18:00:22 +10:00
Randy Mackay
7fc00efe7e
AP_Mount: Viewpro inherits from serial backend
2024-05-22 18:00:22 +10:00
Randy Mackay
790b5e8565
AP_Mount: Siyi inherits from serial backend
2024-05-22 18:00:22 +10:00
Randy Mackay
1e777390b2
AP_Mount: add Backend_Serial
2024-05-22 18:00:22 +10:00
Andy Piper
3a4fdb16a8
AP_RCTelemetry: add support for baro/vario CRSF frames
2024-05-22 17:15:04 +10:00
Andy Piper
1e2621466c
AP_Frsky_Telem: factor out vspeed and nav alt
2024-05-22 17:15:04 +10:00
Andy Piper
9112b14414
AP_RCProtocol: add frame ids for CRSF baro/vario
2024-05-22 17:15:04 +10:00
James O'Shannessy
a5e11911fc
AP_Mount: Only save converted mount if mount was previously set in the first place
...
The mount library force configures the mount type on conversion, even if the mount was never configured in the first place
2024-05-22 17:11:40 +10:00
Andrew Tridgell
5fd4e23fa9
AP_Compass: removed IST8310 overrun message
...
this is not useful and just causes concern to users. Any small bus
delay can trigger this. We have health monitoring at a higher level
2024-05-22 14:51:15 +10:00
Peter Barker
24e54dac88
AC_WPNav: remove un-needed initialisation
2024-05-21 15:52:51 +10:00
Nick Exton
0af4649705
AP_Mount: In Servo backend, report attitude as demanded servo angles, not target angles
2024-05-21 14:27:28 +09:00
Nick Exton
e17439287b
AP_Mount: In Servo backend, add overrides for has_roll_control() and has_tilt_control()
2024-05-21 14:27:28 +09:00
Nick Exton
0e090faf05
AP_Mount: Add roll_range_valid() and pitch_range_valid() functions
...
Equivalent to yaw_range_valid().
2024-05-21 14:27:28 +09:00
Bob Long
7e8f9c72fb
AP_MotorsTri: reverse-frame cleanup and fixes
...
- fix motor test order for reverse frame
- add frame type string for reverse frame
- fix initialization of _pitch_reversed flag
2024-05-21 15:20:27 +10:00
Bob Long
dc3f2c9724
AP_Motors_test: add tri frames to json output
2024-05-21 15:20:27 +10:00
Nick Exton
8b5539c055
AP_Mount: Clarify angle frames of set_angle_target()
2024-05-21 14:28:38 +10:00
Iampete1
44bd77d49e
AP_BattMonitor: FuelLevel_Ananlog: set has_current true so capacity is reported
2024-05-21 10:07:48 +10:00
Andrew Tridgell
54b6349a2a
HAL_SITL: implement wind rate of change
2024-05-21 09:59:37 +10:00
Andrew Tridgell
1603869140
SITL: added SIM_WIND_TC
...
time constant for wind changes
2024-05-21 09:59:37 +10:00
Peter Barker
36e385fb22
AP_NavEKF3: set-origin failure comment improved
2024-05-21 09:56:02 +10:00
Randy Mackay
4e2dd7c399
AP_NavEKF3: accept set origin even when using GPS
2024-05-21 09:56:02 +10:00
muramura
ddae068657
AP_Param: Summarize the type definitions settings
2024-05-21 09:46:32 +10:00
Iampete1
91cdea1a8d
AP_Scripting: examples: fault_handling.lua: ignore errors.
2024-05-21 09:42:22 +10:00
Iampete1
3a7bf8dd7d
AP_Scripting: ignore lua language check issues resulting from https://github.com/ArduPilot/ardupilot/pull/26939
2024-05-21 09:42:22 +10:00
Iampete1
d2e95583d6
AP_Scripting: docs: update
2024-05-21 09:42:22 +10:00
Iampete1
003ccc38c6
AP_Scripting: generator allow more types for uint32 prams and dont add class keyword to globals
2024-05-21 09:42:22 +10:00
Iampete1
cc159a44d5
AP_Scripting: tests: add config files for checks and docs generation
2024-05-21 09:42:22 +10:00
Iampete1
5bb5f442e1
AP_Scripting: ignore lua-language-server-errors
2024-05-21 09:42:22 +10:00
rmaia
07c854db57
AP_OSD: add BTFL sidebar symbols
...
Adds the sidebar symbols translation to BTFL fonts, so sidebar is properly displayed in DJI O3 OSD.
2024-05-21 09:23:49 +10:00
rmaia
e07980db43
AP_OSD: Add configurable sidebar horizontal and vertical size extensions
2024-05-21 09:21:56 +10:00
Randy Mackay
19ea0944b1
AP_SerialManager: TYPE param renamed to MAVLink
2024-05-21 08:38:59 +10:00
Randy Mackay
1da3c24850
AP_EFI: TYPE param renamed to MAVLink
2024-05-21 08:38:59 +10:00
Randy Mackay
fcc2e2ac5a
AC_PrecLand: TYPE param renamed to MAVLink
2024-05-21 08:38:59 +10:00
Randy Mackay
31720d2c83
AP_GPS: TYPE param value renamed to MAVLink
2024-05-21 08:38:59 +10:00
Andrew Tridgell
5cf2c2740e
AP_Terrain: added parameter for terrain cache size
2024-05-17 10:18:13 +10:00
Maxim Buzdalov
ada091f1fc
AP_IOMCU: add support for Extended DShot Telemetry v2
2024-05-15 17:29:19 +10:00
Maxim Buzdalov
1232e810d4
AP_HAL: add support for Extended DShot Telemetry v2
2024-05-15 17:29:19 +10:00
Maxim Buzdalov
43937ddeed
AP_HAL_ChibiOS: add support for Extended DShot Telemetry v2
2024-05-15 17:29:19 +10:00
Maxim Buzdalov
0022c3aa72
AP_ESC_Telem: add support for Extended DShot Telemetry v2
2024-05-15 17:29:19 +10:00
bnsgeyer
8a42a29ef7
AC_AttitudeControl: add comments for system ID disturbance input code
2024-05-14 23:16:52 -04:00
bnsgeyer
c2e99dc50e
AC_AttitudeControl: implement suggested changes
2024-05-14 23:16:52 -04:00
bnsgeyer
84e52378cf
AC_PosControl: add support for sysid of vel and pos loops
2024-05-14 23:16:52 -04:00
Peter Barker
9f0e191505
GCS_MAVLink: deny attempt to do partial upload while mission transfer in progress
...
fixes an internal error where we make sure resources are not allocated before allocating upload resources.
The user may receive a DENIED message if they move a waypoint before an item has been transfered to the vehicle.
2024-05-15 12:26:34 +10:00
Andy Piper
2891b37807
AP_HAL_ChibiOS: add SDMODELV2
2024-05-15 07:27:46 +10:00
Andrew Tridgell
188df1312d
AP_Scripting: fixed float register save/restore in setjmp/longjmp
...
the register save must happen before the setjmp() call, which means
outside of the LUAI_TRY() macro. We also should be saving all 32
floating point registers
2024-05-15 06:47:44 +10:00
Andrew Tridgell
09df079c19
AP_Scripting: added example script that causes a hard fault
...
this exercises rapid fault handling
2024-05-15 06:47:44 +10:00
Andy Piper
2352990d90
AC_AutoTune: zero out D_FF during twitching
2024-05-14 16:33:38 +09:00
Iampete1
0bb51a31ea
AP_HAL_ChibiOS: remove setting of ROMFS flags
2024-05-14 10:05:51 +10:00
Ryan Friedman
2dc547bec2
AP_ExternalAHRS: Fix duplicate condition
...
Signed-off-by: Ryan Friedman <ryanfriedman5410+github@gmail.com>
2024-05-14 09:58:59 +10:00
Iampete1
9026ce065a
AP_BattMonitor: ESC: add mask
2024-05-14 09:58:04 +10:00
Andy Piper
a7d4183776
AP_HAL_ChibiOS: BLITZ Wing H743
2024-05-14 09:35:51 +10:00
Clyde McQueen
b853fe3366
AP_RangeFinder: fix Lua timeout
2024-05-14 09:26:25 +10:00
Peter Barker
bd3e58c413
GCS_MAVLink: mark as not receiving when too many items in MISSION_COUNT.count
...
we left things in the "receiving" state, which would eventually lead to a timeout, rather than just failing instanenously with the correct code.
2024-05-14 09:21:53 +10:00
Patrick José Pereira
34f5579699
AP_HAL_Linux: Remove message about base address
...
The value is the same as in the match
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2024-05-13 10:46:58 -03:00
Patrick José Pereira
6016e411e0
AP_HAL_Linux: Add support to Raspberry Pi 5
...
The Raspberry Pi 5 has a coprocessor that takes care of the IO over the BCM.
This adds support to the new RP1 processor.
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2024-05-13 10:46:58 -03:00
Patrick José Pereira
3f451b9f4c
AP_HAL_Linux: Util_RPI: Add message about unknown board
...
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2024-05-13 10:46:58 -03:00
Patrick José Pereira
4af6142933
AP_HAL_Linux: Util_RPI: Add support to RPI5 identification
...
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2024-05-13 10:46:58 -03:00
Ryan Friedman
fbb785859a
SITL: fix GPS headings
...
* Rename NMEA heading to ground_course_deg
* Rename heading() utility to ground course (it was wrong)
* Add _rad prefix to be pedantic about units
* Add missing degrees conversion in NMEA because NMEA is not SI
Signed-off-by: Ryan Friedman <ryanfriedman5410+github@gmail.com>
2024-05-12 21:06:52 +10:00
Ryan Friedman
3b1ba19640
AP_GPS: fix GPS headings
...
* If you don't wrap the heading, you can get a flyaway
Signed-off-by: Ryan Friedman <ryanfriedman5410+github@gmail.com>
2024-05-12 21:06:52 +10:00
mateksys
8c23379d45
AP_HAL_ChibiOS: add MatekG474-Periph hwdef
2024-05-10 12:54:11 +10:00
Andrew Tridgell
3050a8b0dc
HAL_ChibiOS: fixed erasing of G4 dual-bank past 256k flash
...
BKER needs to be set to bank number, lower 7 bits of page number in
PNB
2024-05-10 12:54:11 +10:00
MattKear
7b02a99d14
AP_MotorsHeli: Swash: Make motor numbers const
2024-05-09 15:19:44 -04:00
Andy Piper
8c91077c35
AP_HAL_ChibiOS: correct GPS output on MambaH743v4
2024-05-08 18:56:45 +10:00
Andrew Tridgell
b4bc6f1e2e
hwdef: added MatekL431-APDTelem
...
for using APD ESCs with serial telemetry
2024-05-08 18:19:19 +10:00
Peter Barker
972872d09f
AP_Baro: create explicit define for BARO_PROBE_EXT parameter
...
the more-than-trivial #if is needed elsewhere, so create an explicit name for it
2024-05-08 18:18:07 +10:00
Peter Barker
51dc35f6ff
AP_Mission: emit jump count even if no limit
...
previously if there was a jump limit we informed the user we were jumping and provided the current count and the limit.
This changes things so that if there's no limit we emit the same message, with the count and "unlimited" in place of the limit number
2024-05-08 17:56:56 +10:00
Randy Mackay
e605f961f2
AP_BattMonitor: torqeedo support for multiple instances
2024-05-08 17:51:09 +10:00
Randy Mackay
72718bb783
AP_Torqeedo: multi backend support
2024-05-08 17:51:09 +10:00
magate
a6995c93cc
AP_Scripting: allow revert of angular rate limits
2024-05-08 17:43:04 +10:00
muramura
3a1e07d816
Filter: Get common processes out of the way
2024-05-08 17:41:32 +10:00
Peter Barker
599ff17f34
AP_HAL_Linux: fix SPIUARTDriver to work with GPS autodetection
...
GPS auto-detection requires get_baud_rate to return non-zero. The SPIUARTDriver was returning 0.
2024-05-08 17:13:58 +10:00
MallikarjunSE
d93f9a09db
hwdef:update DMA
2024-05-08 09:04:45 +10:00
Andrew Tridgell
04c3770a77
AP_Motors: use AHRS for get_air_density_ratio()
2024-05-07 21:19:06 +10:00
Andrew Tridgell
5a439bb9b7
AP_AHRS: added get_air_density_ratio()
2024-05-07 21:19:06 +10:00
Andrew Tridgell
b4ebae5e1b
HAL_SITL: use baro atmospheric tables
2024-05-07 21:19:06 +10:00
Andrew Tridgell
67c506e75c
SITL: use new atmospheric tables
...
and improve pitot handling
2024-05-07 21:19:06 +10:00
Andrew Tridgell
db9cc9ac84
AP_DAL: use ahrs for EAS2TAS
...
this uses the stored value calculated once per loop
2024-05-07 21:19:06 +10:00
Andrew Tridgell
3d2037ef03
AP_Baro: log AltAMSL
...
useful as GPS comparison
2024-05-07 21:19:06 +10:00
Andrew Tridgell
f8ce6a8623
AP_Baro: added atmospheric tables for high altitude flight
...
this gets altitude and EAS2TAS much more accurately up to around 150k
feet AMSL. Enabled on boards using EKF double
2024-05-07 21:19:06 +10:00
Andrew Tridgell
128d9b0e41
AP_Airspeed: added atmospheric tables for high altitude flight
...
this gets altitude and EAS2TAS much more accurately up to around 150k
feet AMSL. Enabled on boards using EKF double
2024-05-07 21:19:06 +10:00
Andrew Tridgell
bae5859a92
AP_Scripting: added copter_loiter_brake script
...
for automatic BRAKE mode when flying in LOITER in steep terrain
2024-05-07 19:39:39 +10:00
Nick Exton
c9f4c47b42
AP_JSON: Ensure all printf() calls end with line break
2024-05-07 14:39:19 +10:00
Henry Wurzburg
061823551a
hwdef:preconfig MicoAir bds shipping with BF for BF migration
2024-05-07 14:14:06 +10:00
Henry Wurzburg
7a21f2b862
hwdef: enable can port on Blitz743Pro
2024-05-07 10:44:15 +10:00
Iampete1
a8b4999d96
AP_Scripting: tests: enforce correct types in docs
2024-05-07 09:51:53 +10:00
Iampete1
aa7a1ce2a6
AP_Scripting: Docs: fix all type errors
2024-05-07 09:51:53 +10:00
Iampete1
a4a8923e1e
AP_Scripting: generator: add return count to manual bindings
2024-05-07 09:51:53 +10:00
Iampete1
439fcb7c46
AP_Scripting: update docs
2024-05-07 09:51:53 +10:00
Iampete1
6e75f7c80f
AP_Scripting: update docs generator to show ap_objects as possibly nil
2024-05-07 09:51:53 +10:00
Peter Barker
7319422d6c
AP_HAL_Linux: remove unused RC input methods
...
these protocols have come from AP_RCProtocol for years
2024-05-07 09:49:48 +10:00
Iampete1
95a5169439
AP_Scripting: CAN: `get_device` and `get_device2` return nil if no driver is configure with the correct protocol
2024-05-07 09:48:10 +10:00
Iampete1
632d0a93c1
AP_CANManager: CANSensor: add getter for initialized
2024-05-07 09:48:10 +10:00
Iampete1
f3c32a7c9e
AC_AttitudeControl: move `euler_rate_to_ang_vel`, `ang_vel_to_euler_rate` and `euler_accel_limit` to Quaternion attitude
2024-05-07 08:34:40 +09:00
tanghongkai
b66ecd8884
AP_Logger: rename class and hwdef related to w25nxx
2024-05-06 12:26:38 +10:00
Gone4Dirt
71a4885c87
AP_MotorsHeli: Add collective and cyclic blade pitch angle logging
2024-05-04 21:36:24 -04:00
Andrew Tridgell
b161bdd6a9
AP_AHRS: prevent use of uninitialised EAS2TAS
2024-05-05 07:57:54 +10:00
Andrew Tridgell
53c0619a9a
SITL: added Glider SITL model
2024-05-05 07:57:54 +10:00
Andrew Tridgell
4370d2e348
HAL_SITL: added Glider SITL model
2024-05-05 07:57:54 +10:00
mateksys
af1ab61f78
AP_HAL_ChibiOS: update MatekH7A3 hwdef for 16MHz xtal
2024-05-04 20:52:50 +10:00
Thomas Watson
0ca37387be
AP_Filesystem: guarantee load_file() data is null-terminated
...
Improves safety of use and clarity of users. Termination is not
included in the reported size to avoid changing user behavior or
misrepresenting the file contents.
2024-05-04 10:15:44 +10:00
Thomas Watson
a5764b7413
AP_ROMFS: clarify usage and null termination
...
Also remove the redundant insertion of the null terminator.
2024-05-04 10:15:44 +10:00
Andrew Tridgell
e2767f899f
AP_Scripting: allow for 0x00 for 2nd checksum byte in INF_Inject driver
...
the device does send 0x00 sometimes and data is valid
2024-05-04 07:43:39 +10:00
Jacob Dahl
e5ea8f14f4
hwdef: ARKV6X: enable debug console
2024-05-02 15:16:33 -07:00
Jacob Dahl
9f5e837646
hwdef: ARKV6X: UART6 RC SBUS input
2024-05-02 15:16:33 -07:00
Andy Piper
f78eb58fb4
AP_InertialSensor: ensure that notches get updated while converging
2024-05-03 07:34:21 +10:00
Iampete1
982cc3a00f
AP_DroneCAN: call RPM subscribe
2024-05-02 20:25:38 +10:00
Iampete1
dff29a5015
AP_RPM: add DroneCAN backend
2024-05-02 20:25:38 +10:00
Iampete1
23989bc569
AP_RPM: add DC_SEND_ID for periph RPM stream
2024-05-02 20:25:38 +10:00
Andrew Tridgell
c628e31c0a
AP_Scripting: fixed crc and added logging to INF_Inject driver
2024-05-02 12:17:49 +10:00
Andy Piper
30877cf11f
AP_InertialSensor: allow FIFO rate logging for hires sampling
2024-05-02 11:01:20 +10:00
Andy Piper
b1e7974453
AP_HAL_ChibiOS: add highres sampling to Pixhawk6X
2024-05-02 11:01:20 +10:00
Peter Barker
d1de760ee4
AP_Scripting: enable AP_Scheduler for CubeOrange-periph-heavy
...
... we use the scehduler in AP_Motors, which is compiled when making heavy-periph
2024-05-01 17:53:44 +10:00
Peter Barker
f44dd9605d
AP_HAL_ChibiOS: enable AP_Scheduler for CubeOrange-periph-heavy
...
... we use the scehduler in AP_Motors, which is compiled when making heavy-periph
2024-05-01 17:53:44 +10:00
Peter Barker
549411133b
GCS_MAVLink: move handling of AP_Radio RC input down into AP_RCProtocol
2024-05-01 17:51:49 +10:00
Peter Barker
f9c5c02f91
AP_RCProtocol: move handling of AP_Radio RC input down into AP_RCProtocol
2024-05-01 17:51:49 +10:00
Peter Barker
6f42556951
AP_Radio: move handling of AP_Radio RC input down into AP_RCProtocol
2024-05-01 17:51:49 +10:00
Peter Barker
f6bfd7cad3
AP_HAL: move handling of AP_Radio RC input down into AP_RCProtocol
2024-05-01 17:51:49 +10:00
Peter Barker
c521a5edfe
AP_HAL_ChibiOS: move handling of AP_Radio RC input down into AP_RCProtocol
2024-05-01 17:51:49 +10:00
Peter Barker
6d9a75b5ec
AP_BoardConfig: move handling of AP_Radio RC input down into AP_RCProtocol
2024-05-01 17:51:49 +10:00
Henry Wurzburg
c91fe8a44f
AP_Motors:explain PMWRange/Angle PWM types in metadata
2024-05-01 17:26:44 +10:00
Iampete1
97449b0572
AC_Avoid: add "BACKZ_SPD" vertical backup speed limit parameter
2024-05-01 17:25:07 +10:00
richaravoil
af3be52925
AP_HAL_ChibiOS: adding active UART in the bootloader
...
Adding USART6 to be active in bootloader phase to allow flashing with a serial connection.
2024-05-01 17:21:30 +10:00
Andy Piper
f38faaae99
AP_HAL_ChibiOS: iFlight Blitz H7 Pro
2024-05-01 17:19:05 +10:00
Daniel Field
33892aa049
SITL: modifications to lift in SIM_StratoBlimp ( #3 )
...
* Update SIM_StratoBlimp.cpp
* Update SIM_StratoBlimp.h
2024-05-01 15:45:22 +10:00
Peter Barker
c08d982c0c
SITL: populate speed accuracy uBlox messages from SITL parameters
2024-05-01 10:19:58 +10:00
Andrew Tridgell
68b58d5435
AP_Compass: workaround hardware bug in IST8310 whoami
...
the WAI (whoami) register is writeable. Not only is it writeable, but
the written value is persistent across a power cycle. You have to
remove power for about 30s for it to finally go back to the right
default value of 0x10
this makes using WAI as a test for finding a IST8310 problematic. The
best we can do is send a soft reset which will reset it to default for
us to then check
2024-05-01 09:24:54 +10:00
Andy Piper
41fd7c726e
AP_IOMCU: allow up to 16 channels of servo data to be sent to the iomcu
2024-05-01 08:21:01 +10:00
Peter Barker
dce3a41657
SITL: add description for SIM_BARO_DRIFT
2024-04-30 16:39:32 +10:00
Peter Barker
527e621a57
AP_Baro: accumulate altitude drift in place of raw calc
...
currently we set drift based on current boot time. If you want to introduce it at some stage in a flight the baro alt will suddenly jump based on how long you've been up.
Instead, accumulate a delta
2024-04-30 16:39:32 +10:00
Andy Piper
25b10fb8c4
AP_HAL: make NeoPixel high-low proportions match for 0 and 1
2024-04-30 11:00:30 +10:00
tanghongkai
0dac7d5cfe
AP_Logger: add support to w25n02kv
2024-04-30 10:58:12 +10:00
Ryan Friedman
b81a5deefe
AP_ExternalAHRS: Add pre-arm for misconfigured EAHRS_SENSORS and GPS_TYPE
...
* This catches when there's a mismatch of GPSx_TYPE and EAHRS_SENSORS
when GPS is enabled
* Before this pre-arm, failure to set GPS_TYPE2 to 21 (ExternalAHRS)
resulted in silent rejection of the data in AP_GPS because the default
is off
* And fix a little logging bug
Signed-off-by: Ryan Friedman <ryanfriedman5410+github@gmail.com>
2024-04-30 09:18:46 +10:00
Iampete1
1b1ce9530c
AP_Common: add `get_distance_NED_alt_frame` method
2024-04-30 08:03:39 +09:00
Iampete1
1cdff47246
AP_Mission: add support for DO_RETURN_PATH_START
2024-04-30 08:03:39 +09:00
Brad Bosch
e8d2097ec4
GCS_MAVLink: Avoid serial passthrough buffer exhausted/lost data
...
Just don't read more than we can write.
2024-04-29 20:06:43 +10:00
Hubert
890a83166d
hwdef: Fix MicoAir743 internal compass rotation
2024-04-29 07:43:57 +10:00
Peter Barker
0a3ff72fd8
AP_Baro: correct placement of field elevation #endif
...
wind compensation and field elevation should be unrelated
2024-04-28 18:02:29 +10:00
Andrew Tridgell
202cc6ae9d
SITL: fixed param meta-data name
2024-04-28 06:48:25 +10:00
Andrew Tridgell
4bb5a9ac52
HAL_SITL: link in StratoBlimp
2024-04-27 22:03:05 +10:00
Andrew Tridgell
1976f3d2d6
SITL: added StratoBlimp simulator
2024-04-27 22:03:05 +10:00
Iampete1
0a3bdbfdc9
Filter: NotchFilter: return NaN for `logging_frequency` if not initialised
2024-04-24 17:30:35 +10:00
Hubert
84900473de
AP_HAL_ChibiOS: added NxtPX4v2
...
Update README.md
Update NxtPX4v2_BackView
Hwdef Remove: define HAL_GPIO_LED_OFF 0
2024-04-24 13:57:48 +10:00
aditya
9abcd6b7ca
AP_ESC_TELEM: solved the logical error in grouping of escs into 4
2024-04-24 08:10:02 +09:00
Paul Riseborough
3c8b3be7a7
AP_NavEKF3: Change yaw source to stop compass use when calibrating
2024-04-23 15:19:56 +09:00
Andrew Tridgell
fe42171268
AP_GPS: make get_RelPosHeading boolean
2024-04-23 10:32:43 +10:00
Hubert
d1d71db8a0
AP_HAL_ChibiOS: add hwdef MicoAir743
...
Update README.md
Co-Authored-By: Henry Wurzburg <hwurzburg@yahoo.com>
2024-04-23 09:56:23 +10:00
Henry Wurzburg
4d7e4d1ca9
Revert "hwdef: bdshot version of the MatekF765-SE"
...
This reverts commit ac86bd8d21
.
2024-04-23 09:52:01 +10:00
Michael du Breuil
ff7a215dd0
AP_Baro: Do not cache EAS2TAS conversions
...
Caching this introduces discontinuities in TECS, as the step change
modifies the target speed demand.
2024-04-23 09:32:27 +10:00
Iampete1
30fdae880f
SITL: allow disabling MAVLink simstate messages
2024-04-23 09:16:55 +10:00
Iampete1
64b57de559
AP_HAL_SITL: call `_sitl->set_stop_MAVLink_sim_state()` when alocating elrs
2024-04-23 09:16:55 +10:00
Iampete1
700804a015
SITL: add ELRS simulator
2024-04-23 09:16:55 +10:00
Iampete1
cbd5bcb694
AP_HAL_SITL: SITL_State_common: add elrs and pass portnumber in `create_serial_sim`
2024-04-23 09:16:55 +10:00
Iampete1
b0ceaa7610
AP_HAL_SITL: use DataRateLimit helper
2024-04-23 09:16:55 +10:00
Iampete1
92adcb14e1
AP_HAL: utility: Add Data Rate Limit helper
2024-04-23 09:16:55 +10:00
Daniel Li
f47998ed8a
hwdef: Fix Aocoda-RC H743Dual motor 5-8 mis-labeled issue
2024-04-22 12:03:33 +10:00
Ferruccio Vicari
1c104557b7
AP_Motors: fix heli yaw behavior in autorotation
2024-04-18 11:13:50 -04:00
Peter Barker
c5f4fe9a8a
AP_Baro: remove Baro accumulate API
...
no backend actually needs to be prodded, everything is done on timers
2024-04-18 09:19:20 +10:00
Tatsuya Yamaguchi
8874c1a560
AP_HAL_SITL: added HEXA X
2024-04-18 08:25:41 +10:00
Peter Barker
bf63729d31
SRV_Channels: gate method on scripting being enabled
...
also AP_Scheduler since we're calling and instance method on it
2024-04-18 08:25:15 +10:00
Peter Barker
ee038cdf1f
GCS_MAVLink: adjust for AP_SCHEDULER_ENABLED being false
2024-04-18 08:25:15 +10:00
Peter Barker
35dbf93e13
AP_Scheduler: fixes for AP_SCHEDULER_ENABLED
2024-04-18 08:25:15 +10:00
Peter Barker
fe9bcb9b5b
AP_Vehicle: cope with AP_Scheduler not being available
2024-04-18 08:25:15 +10:00
Iampete1
8f2b2cfe31
Filter: HarmonicNotchFilter: convert harmonics as a bitmask
2024-04-17 22:15:22 +01:00
Iampete1
cd0bdda93d
AP_Param: add convert_bitmask_parameter_width method
2024-04-17 22:15:22 +01:00
Tatsuya Yamaguchi
26ec2ae952
AC_AttitudeControl: fix ATC_SLEW_YAW description (NFC)
2024-04-17 22:18:51 +10:00
Peter Barker
b367fd0c1e
AP_RCMapper: exclude body of AP_RCMapper based on AP_RCMAPPER_ENABLED
2024-04-17 18:17:56 +10:00
Peter Barker
dc692f7169
AP_Arming: exclude body of AP_Arming.cpp based on AP_ARMING_ENABLED
2024-04-17 18:17:27 +10:00
Peter Barker
75bbff01c1
AP_DroneCAN: move Arming, Beacon and RC_Mapper into ardupilotwaf.py
...
these were built for all vehicles, so put them in the common list
2024-04-17 18:11:46 +10:00
Peter Barker
7d10b0fc4d
GCS_MAVLink: add and use AP_HOME_ENABLED
2024-04-17 18:09:25 +10:00
Peter Barker
9df6beb181
AP_AHRS: add and use AP_HOME_ENABLED
2024-04-17 18:09:25 +10:00
Randy Mackay
6a56b2bc94
AP_HAL_ChibiOS: correct CUAV-Nora periph power comment
2024-04-17 18:07:56 +10:00
Randy Mackay
1b4f62c1ea
AP_HAL_ChibiOS: correct CUAV-X7 periph power comment
2024-04-17 18:07:56 +10:00
Randy Mackay
69eff077d7
AP_HAL_ChibiOS: Durandal peripheral power on at startup
2024-04-17 18:07:56 +10:00
Randy Mackay
136ccf66c7
AP_HAL_ChibiOS: Pixhawk5X peripheral power on at startup
2024-04-17 18:07:56 +10:00
Randy Mackay
0b3b2148cb
AP_HAL_ChibiOS: Pixhawk6C peripheral power on at startup
2024-04-17 18:07:56 +10:00
Randy Mackay
561d1254a1
AP_HAL_ChibiOS: Pixhawk6X peripheral power on at startup
2024-04-17 18:07:56 +10:00
Randy Mackay
d951898f13
AP_DAL: visual odom get_delay_ms return fix
2024-04-17 18:05:26 +10:00
Andy Piper
2a786616b1
AP_IOMCU: account for possibility of SBUS_OUT in PWM structures
2024-04-17 17:49:56 +10:00
Andy Piper
ca3ad93f0d
AP_HAL_ChibiOS: iFlight BLITZ Mini F745
2024-04-17 17:34:10 +10:00
Andy Piper
bad4463463
AP_HAL_ChibiOS: iFlight Blitz F745
2024-04-17 17:34:10 +10:00
Gone4Dirt
9153c40568
AP_HAL_ChibiOS: MatekL431-Rangefinder: Add 2nd rangefinder
2024-04-17 17:06:42 +10:00
Andrew Tridgell
dce2492321
AP_NavEKF3: use filtered gyro in INS position correction
...
this reduces the impact of IMU noise on the output velocity from the
EKF
2024-04-17 14:53:59 +10:00
Andrew Tridgell
eed50a0872
AP_DAL: change gyro filter to 10Hz
...
this improved EKF3 IMU position correction for noise
2024-04-17 14:53:59 +10:00
Clyde McQueen
52a9bb7792
AP_Baro: disable BARO_FIELD_ELV for sub
2024-04-17 10:37:16 +10:00
Peter Barker
44359ff6b2
AP_Common: add get_alt - 100 times better than get_alt_cm
2024-04-16 19:14:12 +10:00
Peter Barker
423198cef0
AP_Frsky_Telem: avoid manipulation of alt frames outside of Location object
2024-04-16 19:14:12 +10:00
Leonardo Garcia
763193d4fc
AP_HAL_ChibiOS: Support for 3DR Control Zero H7 OEM rev G
...
Co-authored-by: Alexis Guijarro <totonzx@gmail.com>
Co-authored-by: Andy Piper <github@andypiper.com>
2024-04-16 14:10:13 +10:00
Peter Barker
cd9aa0e3ed
AP_GPS: remove dedundant crc32 routine from Nova
2024-04-16 10:02:47 +10:00
Peter Barker
b95bd8f19d
AP_AHRS: remove call to get_home()
...
this is our object, we don't need permission
2024-04-16 08:47:15 +09:00
Peter Barker
6ef131c0f9
SITL: correct diagnostic message about what AirSim-in addr we bound
...
Co-authored-by: Oleksiy Protas <elfy.ua@gmail.com>
2024-04-16 09:31:20 +10:00
Henry Wurzburg
5c4aeddae7
AP_HAL_ChibiOS: add MicoAir405Mini
2024-04-16 09:21:23 +10:00
Brad Bosch
6538e8c9ae
GCS_MAVLink: Cleanup and Reduce chance of GCS FTP timeout
...
Delete unneeded orphan comment
replace get_last_txbuf() with a predicate
Make txbuf flow control threashold consistent between Parameter download and FTP and keep it in range where we are also slowing down normal streams
Delay sending text banner until after first FTP response to reduce latency on slow links
Don't let flow control delay setting ftp.last_send_ms so as to slow down normal streams as soon as possible to improve FTP response time
2024-04-16 09:16:52 +10:00
Brad Bosch
bbfb0ed001
GCS_MAVLink: Make get_last_txbuf() safer
...
Add check for stale radio_status to get_last_txbuf()
Move last_txbuf into last_radio_status struct
2024-04-16 09:16:52 +10:00
Brad Bosch
0e47599bb1
GCS_MAVLink: respect txbuf flow control for FTP messages
...
This gives slow radio links a fighting chance of getting FTP bulk download working even when they use a baud rate which is much higher than their current bandwidth.
This should eliminate the need to disable FTP for parameter download on slow to moderate speed radio links like mLRS and ELRS. It allows removal of a hack in mLRS which results in a decrease in parameter download time for 19 Hz mLRS from 45-60 seconds to 11-17 seconds. This should also be good news for the ELRS rc-mavlink branch.
2024-04-16 09:16:52 +10:00
Oleksiy Protas
cadd121401
Bounds correctness for AnalogIn_IIO
2024-04-16 09:14:55 +10:00
FOG_Yamato
ac86bd8d21
hwdef: bdshot version of the MatekF765-SE
2024-04-16 09:13:43 +10:00
Peter Barker
5a21d0cb8a
AP_Camera: correct compilation when HAL_MOUNT_SET_CAMERA_SOURCE_ENABLED not set
...
- need the include because an enumeration is used in the header (relied on the include previously being made by a file including this header)
- set_lens is not part of set-camera-source, so shouldn't be excluded
- exclude entire method, not body of method based on the include
2024-04-14 13:33:00 +10:00
Peter Barker
a4ec91c4f1
AP_Follow: use Location.change_alt_frame for what it is good for
2024-04-14 13:29:58 +10:00
Andrew Tridgell
1cafe25854
AP_Scripting: improve INF inject driver
...
make it more robust to serial errors, and support correct checksum
2024-04-14 07:19:40 +10:00
Tim Tuxworth
495726344c
AP_Mount: Do not override default mode when first connecting to RC
2024-04-12 12:18:33 +09:00
Peter Barker
43995763db
AP_Camera: stop adjusting logged altitudes manually, use location methods
2024-04-11 22:39:09 +10:00
Peter Barker
d1a1bcba19
RC_Channel: process only transitions after rc is valid for arm_emergency_stop switch and parachute deploy switch
2024-04-11 22:17:08 +10:00
Andy Piper
563d31b1ea
AP_HAL_ChibiOS: fixups for FoxeerF405v2
2024-04-11 18:38:08 +10:00
Thomas Frans
d52f49ec36
AP_GPS: SBF report correct satellite count on NrSV DNU value
...
When the NrSV field of the SBF PVTGeodetic message contains the
Do-Not-Use value of 255, set the satellite count to 0 instead of
ignoring the change.
2024-04-11 18:35:16 +10:00
muramura
a9d0bf856e
AP_Mount: Do not perform unnecessary processing
2024-04-11 18:35:01 +10:00
murata
f605c0fbe3
RC_Channel: Notify function error if ADS-B is not implemented
2024-04-11 13:12:22 +10:00
Henry Wurzburg
6b5bb4e864
hwdef:add BIDIR to MatekH7A3
2024-04-11 10:17:43 +10:00
Peter Barker
468158e0f9
RC_Channel: add option to flight mode pause/resume via aux function
2024-04-11 10:17:35 +10:00
mateksys
74e7132bd3
hwdef: add MatekH7A3 readme.md
2024-04-11 10:17:17 +10:00
Peter Barker
f83cde7760
GCS_MAVLink: correct spelling of dereferecing
2024-04-10 21:56:52 +10:00
Peter Barker
292ad8678a
AP_Arming: force user to ack crashdump or get prearm failure
2024-04-10 21:56:52 +10:00
Andrii Fil
ed6ddf725d
AP_Parachute: optional (CHUTE_OPTIONS:1) disarm defore parachute release
2024-04-10 21:55:51 +10:00
Hubert
4893f1303c
hwdef: correct hwdef for MicoAir405v2
...
Update hwdef: DMA allocation and LED mapping
Update README: UARTs DMA allocation
Update defaults.parm: GPS low baudrate
2024-04-10 21:55:01 +10:00
Peter Barker
cd8f081611
AP_NavEKF: correct setting of _filled
...
Co-authored-by: luweiagi <luweiagi@163.com>
2024-04-10 21:53:54 +10:00
Peter Barker
99f5e74a8e
AP_NavEKF: correct initialisation of ekf_imu_buffer
...
this init() call can be called on an existing buffer, in which case we clear the object.
Presumably since we've just zeroed all the elements its safe to say that we should mark the object as having never-been-filled
2024-04-10 21:53:54 +10:00
Peter Barker
8452f5f0cd
AP_NavEKF: add tests for ekf_imu_buffer
2024-04-10 21:53:54 +10:00
Peter Barker
42c4329d4c
RC_Channel: require RC switch position transition for arming
...
currently if you turn your transmitter on at runtime we may try to arm the vehicle if your arming switches are asserted.
This patch changes things to we don't trust the first position seen from an RC receiver - we must see a transission for the arming options
2024-04-10 21:53:23 +10:00
Peter Barker
f55c35487b
AP_VisualOdom: correct unused variable in visualodom
...
when both logging and gcs are compiled out
2024-04-10 21:52:28 +10:00
Andrew Tridgell
739d4a7fc8
hwdef: the RM3100 should run at max 1MHz on SPI bus
2024-04-10 21:40:51 +10:00
Alexis Guijarro
a50c19f622
mRo Control Zero Classic: Added ADC input for servo rail
2024-04-10 19:01:51 +10:00
Peter Barker
b03b8309ef
AP_GPS: copy GPS metadata in for pre-per-instance-parameters
...
allows to not break older firmware in terms of available metadata
2024-04-10 16:37:35 +09:00
Peter Barker
0e6bca92f7
AP_HAL_ChibiOS: remove redundant lines from hwdef files
2024-04-10 17:28:48 +10:00